Forward-mounted footrests Harley Davidson
Forward-mounted footrest system for more comfort and controlThis forward-mounted footrest system from Burchard Excellence was specially developed for the Harley Davidson V Rod VRSC and significantly improves ergonomics and riding comfort. The system moves the foot position forward by 12 cm and thus ensures a more relaxed sitting position on longer rides. Manufactured in Germany, this system stands for precise workmanship, high-quality materials and reliable function in daily use.Brand and originBurchard Excellence brandCountry of origin Germany Made in GermanyAll components are manufactured with high precision and meet the highest quality requirements.Test statusWith ABE general operating permit from the Federal Motor Transport AuthorityThe enclosed ABE general operating permit makes it possible to legally install a vehicle part without additional registration in the vehicle documents, provided that all requirements of the ABE are met.Suitable forModelModel nameYear of manufactureVRSCAV-Rod (Original)2002-2006VRSCAWV-Rod2007-2010VRSCBV-Rod2004VRSCDNight Rod2006-2008VRSCDXNight Rod Special2007-2017VRSCFV-Rod Muscle2009-2017VRSCSE/XScreamin' Eagle (CVO)2005-2007Material and finishThe forward-mounted footrest system is made of high-quality steel and is available in the following finishesHigh-gloss chrome-platedGlossy black powder-coatedBlack matt powder-coatedThe desired finish can be selected conveniently via the variant selection in the store.The picture shows the footrest system in the Ness Style Look version with milled levers.Special features of the surface finishAll components are manufactured and finished entirely in Germany. The chrome plating is carried out in a specially adapted process that is precisely designed for our footrest systems. For powder-coated versions, the components are nickel-plated beforehand. This ensures complete corrosion protection and a particularly durable coating.Pre-laying to the original footrest systemThe pre-positioning is 12 cm.The distance is measured from the center of the original footrests to the center of our pre-installed footrest system.To improve or maintain the lean angle clearance, the height level of the new footrests is raised by approx. 1.5 to 2.5 cm, depending on the design.Design and design variantsFootrestsThere are two design variants to choose fromSundance lookSeveral small rubber O-rings ensure a secure hold and a classic style.Ness style lookWide rubber rings provide a modern look and a stable contact surface.Shift and brake leversThe levers are available in a milled version.This version has two slotted holes and has a particularly modern and minimalist look.Precisely mounted lever mechanismShift and brake levers are mounted on grease bearings and fitted with grease nipples H1 M6 x 1 SW 7 6. This means that there is no play in the mechanism and precise shifting and braking operations are guaranteed.The rod ends of the levers can also be lubricated with spray oil. This significantly increases the service life of the entire mechanism.Care instructionsWe recommend lubricating the levers completely before the start of each season and then servicing them as required.Scope of deliveryCompletely pre-assembled, pre-routed footrest systemWith ABE general operating permit from the Federal Motor Transport AuthorityIncluding screw material for mountingBrief overview of installationInstallation is carried out on the original mounting points of the frame and on the radiator mounting. The integrated square fit ensures positive positioning of the system. The original brake cylinder is retained and the brake system does not need to be opened or bled.All screw connections must be secured with the supplied threadlocker in accordance with the installation instructions. After installation, check that the gears and brakes can move freely and that all screws are tight.A complete functional check of the shifting and braking system is required before the first ride.Why are forward-mounted footrest systems an advantageA forward-mounted footrest system significantly improves the ergonomics of the motorcycle. The legs are positioned further forward, resulting in a more relaxed riding position. This reduces the strain on the knees and hips, especially on longer journeys. At the same time, the adapted position of the levers ensures more ergonomic operation of the gears and brakes and supports precise vehicle control.Spare parts serviceEach individual part of our footrest systems is also available as a spare part. This ensures maximum durability and easy repair in the event of wear or damage.Our customer service team will be happy to help you select the right spare part. Contact us at any time for advice.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 12 cm forward-mounted footrest system for Harley Davidson Softail / FX - FXE Super Glide FXS Low Rider Harley Davidson Softail / FXB - Sturgis Harley Davidson Softail / FXWG - Wide Glide Harley Davidson Softail / FXR - Sport Glide FXRT Harley Davidson Softail / FXST - Softtail It is important that you inform us after ordering whether you have fitted the original brake cylinder to your footrest system or whether you have fitted the original brake cylinder to the rear of the frame. The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany" Forward-mounted footrest system with ABE 30 cm forward-mounted footrest system for Harley Davidson Dyna models from 2006 onwards Street Bob FXDB / FD2 Low Rider FXDL / FD2 Fat Bob FXDF / FD2 Super Glide Custom FXDC / FD2 Wide Glide FXDWG / FD2 Switchback FLD / FD2 Please note that the pre-routing may differ if a pre-routed footrest system has already been installed by Harley Davidson. The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 17 cm forward-mounted footrest system for Harley Davidson Softail Fatboy / FS2 12 cm forward-mounted footrest system for Harley Davidson Softail Breakout / FS2 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 42 cm forward-mounted footrest system for Harley Davidson Sportster / XL2 models from 2013 onwards Only for models with ABS The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 28 cm forward-mounted footrest system for Harley Davidson Sportster / XL2 models from 2013 onwardsOnly for models with ABS The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 42 cm forward-mounted footrest systemforHarley Davidson Sportster / XL2 models from 2004 onwards Only for models without ABS The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 28 cm forward-mounted footrest system for Harley Davidson Sportster / XL2 models from 2004 onwards Only for models without ABS The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 32 cm forward-mounted footrest system for Harley Davidson Sportster Evo 5 speed / XL/2 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 24 cm forward-mounted footrest system for Harley Davidson Sportster Evo 5 speed / XL/2 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 32 cm forward-mounted footrest system for Harley Davidson Sportster Evo 4 speed / XL/2 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 24 cm forward-mounted footrest system for Harley Davidson Sportster Evo 4 speed / XL/2 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 32 cm forward-mounted footrest system for Harley Davidson Sportster 84 (1100) / XL/2 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 24 cm forward-mounted footrest system for Harley Davidson Sportster 84 (1100) / XL/2 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in either high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 32 cm forward-mounted footrest system for Harley Davidson Sportster 82-83 / XL/2 Please pay attention to the hole spacing shown in the picture. The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in either high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 32 cm forward-mounted footrest system for Harley Davidson Sportster 79-80 / XL/2 ATTENTION ONLY FOR MODELS WITH DISC BRAKE Please pay attention to the hole spacing shown in the picture. The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.