Forward-mounted footrests Honda

Diese vorverlegte Fußrastenanlage wurde speziell für die Honda CMX 1100 Rebel mit manueller Schaltung (Typ SC87A, Typgenehmigung e6*168/2013*00158*) entwickelt. Sie sorgt für eine entspanntere Sitzposition und mehr Komfort auf langen Fahrten. Gefertigt in Deutschland und geprüft nach höchsten Qualitätsstandards, steht dieses Produkt für TÜV-geprüfte Sicherheit und präzise Verarbeitung – Made in Germany.Hochwertige Verarbeitung – Marke Burchard ExcellenceDie Fußrastenanlage stammt aus dem Hause Burchard Excellence und wird vollständig in Deutschland gefertigt. Sie überzeugt durch ihre stabile Konstruktion aus hochwertigem Stahl sowie durch die präzise Fertigung und Vormontage.Mit ABE – Keine Eintragung erforderlichDie beiliegende ABE (Allgemeine Betriebserlaubnis) ermöglicht es, das Bauteil legal ohne zusätzliche Eintragung in die Fahrzeugpapiere zu verwenden – vorausgesetzt, sämtliche Auflagen der ABE werden eingehalten.FahrzeugkompatibilitätHersteller: HondaModell: CMX 1100 Rebel mit manueller SchaltungTyp: SC87A mit manueller SchaltungTypgenehmigung: e6*168/2013*00158*Materialien und OberflächenDie Anlage besteht aus hochwertigem Stahl und ist in folgenden Varianten erhältlich:Vernickelt und schwarz glänzend pulverbeschichtetVernickelt und schwarz matt pulverbeschichtetDie Auswahl der gewünschten Ausführung erfolgt über die Variantenoption im Onlineshop.Vorverlegung und SchräglagenfreiheitDie Anlage verlegt die Fußrasten um 23 cm nach vorn. Der Abstand wird von der Mitte der originalen Fußrasten bzw. Trittbretter bis zur Mitte der neuen Anlage gemessen.Je nach Ausführung wird die Schräglagenfreiheit durch eine Höherlegung von ca. 1,5 bis 2,5 cm zusätzlich verbessert oder beibehalten.Designvarianten der FußrastenZur Auswahl stehen zwei Designoptionen:Sundance Look mit mehreren kleinen Gummi-O-Ringen für einen klassischen StilNess Style Look mit breiten Gummiringen für ein modernes ErscheinungsbildSchalt- und Bremshebel – Gefräste AusführungDie Schalt- und Bremshebel sind gefräst und verfügen über zwei präzise gearbeitete Langlöcher – für ein modernes und funktionales Design.Die Kugellagerung der Hebel sorgt für eine spielfreie, wartungsfreie Funktion mit hoher Präzision. Zusätzlich können die Gelenkköpfe mit Sprühöl abgeschmiert werden, was die Lebensdauer des Systems deutlich verlängert.PflegehinweisZur Werterhaltung empfehlen wir, die Gelenkköpfe vor jeder Saison vollständig abzuschmieren und bei Bedarf nachzupflegen.LieferumfangKomplett vormontierte vorverlegte FußrastenanlageABE (Allgemeine Betriebserlaubnis)Schraubenmaterial zur MontageHydraulischer BremslichtschalterZusatzinformation zum BremslichtschalterDer originale Bremslichtschalter sowie das originale Relais des Tempomats werden durch den mitgelieferten hydraulischen Bremslichtschalter ersetzt. Dieser wird direkt im Bremszylinder anstelle der originalen Hohlschraube montiert. Der elektrische Anschluss erfolgt über die vorhandene Verkabelung.Kurzanleitung zur MontageOriginale Bremspumpe und Fußrastenträger demontierenNeuen Fußrastenträger am Rahmen befestigenDruckfeder MON 040 mit Federteller FDT 002 und Schraube MON 047 auf der Druckstange montierenBremshebel und Bremspumpe mit Bremsstange BRG 250 verbindenHohlschraube durch den hydraulischen Bremslichtschalter ersetzenBremsanlage entlüftenElektrische Verbindung zum alten Bremslichtschalter herstellenErgonomische Vorteile vorverlegter FußrastenanlagenVorverlegte Fußrasten verbessern die Ergonomie durch eine entspanntere Beinposition und eine aufrechtere Sitzhaltung. Das sorgt für mehr Komfort auf langen Strecken, reduziert die Belastung von Hüfte und Knien und schafft mehr Bewegungsfreiheit – besonders für große Fahrerinnen und Fahrer eine spürbare Entlastung.ErsatzteilserviceJedes Bauteil dieser Fußrastenanlage ist auch einzeln als Ersatzteil erhältlich. So sichern Sie sich maximale Langlebigkeit und eine unkomplizierte Reparatur im Bedarfsfall.Bei Fragen zur Ersatzteilwahl steht Ihnen unser Kundenservice gerne beratend zur Seite.

Die vorverlegte Fußrastenanlage von Burchard Excellence wurde speziell für anspruchsvolle Motorradfahrer entwickelt, die Komfort und Ergonomie auf langen Strecken schätzen. Gefertigt in Deutschland und TÜV-geprüft, steht dieses Produkt für geprüfte Qualität und höchste Fertigungsstandards.Marke und HerkunftHersteller: Burchard ExcellenceHerkunft: Deutschland – Made in GermanyABE – Allgemeine BetriebserlaubnisDie beiliegende ABE (Allgemeine Betriebserlaubnis) ermöglicht es, ein Fahrzeugteil legal ohne zusätzliche Eintragung in die Fahrzeugpapiere zu verbauen – sofern alle Auflagen der ABE eingehalten werden.FahrzeugkompatibilitätDiese Fußrastenanlage ist passend für:Hersteller: HondaHandelsbezeichnung: CMX 1100 Rebel DCT AutomatikTyp: SC87B DCT AutomatikTypgenehmigung: e6*168/2013*00158*Material und OberflächenvariantenDie Anlage wird aus hochwertigem Stahl gefertigt und ist in folgenden Oberflächen erhältlich:Vernickelt und schwarz glänzend pulverbeschichtetVernickelt und schwarz matt pulverbeschichtetHinweis: Die Auswahl erfolgt über die Variantenwahl im Shop.Technische Angaben zur VorverlegungDie Vorverlegung beträgt 23 cm, gemessen von der Mitte der originalen Fußrasten bzw. der Trittbrettmitte bis zur Mitte der neuen Fußrastenanlage.Um die Schräglagenfreiheit beizubehalten oder zu verbessern, wird das Höhenniveau der neuen Fußrasten je nach Ausführung um ca. 1,5 bis 2,5 cm angehoben.DesignvariantenFußrasten:Sundance Look: Klassisches Design mit mehreren kleinen O-Ringen aus GummiNess Style Look: Moderner Look mit breiten GummiringenSchalt- und Bremshebel:Gefräste Ausführung mit zwei Langlöchern pro Hebel für ein minimalistisches, modernes ErscheinungsbildDas Produktbild zeigt die Variante „Ness Style Look“ mit gefrästen Hebeln.Kugelgelagerte Hebel und abschmierbare GelenkköpfeDer Bremshebel ist kugelgelagert und wartungsfrei – für präzise Bremsvorgänge ohne Spiel.Die Gelenkköpfe der Hebel sind abschmierbar und lassen sich mit Sprühöl pflegen. Dies verlängert die Lebensdauer des Gesamtsystems erheblich.Pflegehinweis:Vor Saisonbeginn empfehlen wir eine vollständige Abschmierung der Gelenkköpfe. Bei Bedarf ist eine Nachpflege möglich.LieferumfangKomplett vormontierte FußrastenanlageABE vom Kraftfahrt-BundesamtMontage-SchraubenmaterialHydraulischer BremslichtschalterProduktdetails zum BremslichtschalterDer originale Bremslichtschalter sowie das Relais des Tempomats werden durch den mitgelieferten hydraulischen Bremslichtschalter ersetzt. Dieser wird direkt im Bremszylinder anstelle der Hohlschraube montiert.Der elektrische Anschluss erfolgt über die vorhandenen Originalkabel.Kurzübersicht zur MontageBremspumpe von der originalen Fußrastenanlage abschraubenRechten Fußrastenträger vom Rahmen entfernenNeuen, vormontierten Träger anschraubenMontagehinweis SC87:Druckfeder MON 040 mit Federteller FDT 002 und Schraube MON 047 auf Druckstange montierenBremspumpe und Bremshebel mit Bremsstange BRG 250 verbindenHohlschraube der Bremspumpe durch hydraulischen Bremslichtschalter ersetzenBremsanlage entlüftenKabel anschließenErgonomische Vorteile vorverlegter FußrastenVorverlegte Fußrastenanlagen bieten spürbare Vorteile in puncto Sitzkomfort und Ergonomie. Durch die nach vorne verlagerte Beinstellung wird eine entspanntere Sitzposition erreicht, die insbesondere auf längeren Strecken die Rücken- und Kniegelenke entlastet.Zusätzlich kann eine bessere Fahrzeugkontrolle durch optimierte Beinhaltung erzielt werden.ErsatzteilserviceAlle Komponenten dieser Fußrastenanlage sind einzeln als Ersatzteil erhältlich.Unser Kundenservice unterstützt Sie gerne bei der Auswahl passender Ersatzteile für eine nachhaltige und unkomplizierte Instandhaltung.

"Made in Germany"Forward mounted footrest system with ABE of the Kraftfahrt-Bundesamt (Federal Motor Transport Authority)30 cm advanced footrest systemforHonda CMX 1100 Rebel / SC83B DCT automatic transmissionAttention: For the assembly it is necessary to mill out the cover on the engine on the right side. The milling is necessary to be able to mount the footrest system on the frame. For customers who have no technical possibility to mill out the side cover, we offer the milling as a service. You can select this service when ordering. Please note that we need your original cover for this.The footrest system is delivered pre-assembled with all parts necessary for mounting, such as an extended brake line (if necessary). The assembly is done on the original frame mounting points. Our footrests are made of steel and are available in either high gloss chrome, gloss black powder coated or matte black powder coated. In order to achieve corrosion resistance similar to chrome plating, the footrest systems are galvanically nickel-plated before powder coating. All Motorrad Burchard footrest systems come with a 2-year warranty on workmanship and chrome plating.Shift and brake levers are ball bearing mounted. Force-transmitting connecting parts (ball joints) on the shift and brake rods are backlash-free and also equipped with grease nipples. This quality standard ensures a minimum of play on/at the shafts and maximum service life. The footrest system is supplied with an ABE from the Kraftfahrt-Bundesamt, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts.

"Made in Germany"Forward mounted footrest system with ABE of the Kraftfahrt-Bundesamt (Federal Motor Transport Authority)30 cm advanced footrest systemforHonda CMX 1100 Rebel / SC83A manual transmissionThe footrest system is delivered pre-assembled with all parts necessary for mounting, such as an extended brake line (if necessary). Mounting is done on the original frame mounting points.Our footrests are made of steel and are available in either high gloss chrome, gloss black powder coated or matte black powder coated. In order to achieve a corrosion resistance similar to chrome plating, the footrest systems are galvanically nickel-plated before powder coating. All Motorrad Burchard footrest systems come with a 2-year warranty on workmanship and chrome plating.Shift and brake levers are ball bearing mounted. Force-transmitting connecting parts (ball joints) on the shift and brake rods are backlash-free and also equipped with grease nipples. This quality standard ensures a minimum of play on/at the shafts and maximum service life. The footrest system is supplied with an ABE from the Kraftfahrt-Bundesamt, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.

Forward-mounted footrest system for the Honda CMX 500 Rebel - Burchard ExcellenceThe forward-mounted footrest system from Burchard Excellence was specially developed for the Honda CMX 500 Rebel. It enables an ergonomically optimized seating position and at the same time offers a high-quality design in proven quality. Manufactured in Germany, the product stands for durability, functionality and TÜV-tested safety.Brand and originThe footrest system comes from Burchard Excellence and is manufactured entirely in Germany - Made in Germany.ABE - General operating permitThe enclosed ABE (General Operating Permit) makes it possible to install the product legally and without additional registration in the vehicle documents, provided that all conditions of the ABE are met.Vehicle compatibilitySuitable for:Manufacturer: HondaTrade name: CMX 500 RebelType: PC56Typgenehmigung:e13*168/2013*00086*Material and surface variantsThe system is made of high-quality steel and is available in the following finishes:High-gloss chrome-platedNickel-plated and glossy black powder-coatedNickel-plated and matt black powder-coatedThe selection is made conveniently via the variant selection in the online store.Technical data on the forward controlsThe footrest system is moved 23 cm further forward. The distance is measured from the center of the original footrests to the center of the new position. To improve or maintain the lean angle clearance, the height level is raised by around 1.5 to 2.5 cm, depending on the design.Design variantsFootrests:Sundance look: Classic style with several small rubber ringsNess style look: Modern look with wide rubber ringsShift and brake levers:Smooth: Without slotted holes - for a classic appearanceMilled: With two slotted holes - modern and minimalistHigh-quality technology: Lubricatable joints and leversThe shift and brake levers are equipped with H1 grease nipples and grease bearings. This ensures play-free and precise operation. The rod ends can also be lubricated with spray oil, which significantly extends the service life of the system.Care instructions: We recommend lubricating the levers completely once at the start of each season and topping them up if necessary.Scope of deliveryCompletely pre-assembled footrest systemABE (general operating license)Screws for mountingHydraulic brake light switchTechnical implementation - replacing the brake light switchThe original mechanical brake light switch is replaced by the hydraulic brake light switch supplied. This is fitted directly in the brake cylinder instead of the original banjo bolt. The electrical connection is made using the existing original cables.Brief overview of installationBrake side:Remove the original brake pump and footrest carrierFit the new unit to the frameFit brake pump and pressure spring with spring plateConnect the brake leverInstall the hydraulic brake light switchBleed the brake systemEstablish electrical connection to the original cableShift side:Remove original footrest carrierFit new unitConnect the shift rod to the shift lever and shift unitErgonomic advantages of forward-mounted footrest systemsForward-mounted footrests allow a more relaxed leg and sitting position, especially on longer rides. The more stretched seating position relieves pressure on the knee joints and hips and contributes to a more upright posture. This reduces muscle tension and ensures greater comfort and riding enjoyment - even on longer journeys.Spare parts serviceAll individual components of the footrest system are also available as spare parts. This ensures the long-term usability of your product. Our customer service team will be happy to help you choose the right spare parts.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 12 cm forward-mounted footrest system for Honda VT 1300 CX Fury / SC61 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 12 cm forward-mounted footrest system for Honda VTX 1300 / SC52 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 22 cm forward-mounted footrest system for Honda VTX 1300 / SC52 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 27 cm forward-mounted footrest system for Honda VF 1100 C / SC12 Honda V65 Magna The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 19 cm forward-mounted footrest system for Honda VT 700 C / RC19 only for models with linkage brake Honda VT 750 C / RC29 Honda VT 800 C / RC32 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 12 cm forward-mounted footrest system for Honda VT 1100 C Shadow / SC18 Attention for models with 37cm frame width.Honda VT 1100 C Shadow / SC23 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 12 cm forward-mounted footrest system for Honda VT 1100 C Shadow / SC18 Attention for models with 29cm frame width. The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 19 cm forward-mounted footrest system for Honda VT 1100ACE C3 / SC39 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 19 cm forward-mounted footrest system for Honda VT 1100ACE C2 / SC32 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 20 cm forward-mounted footrest system for Honda VT 750 C2 ACE / RC44 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 23 cm forward-mounted footrest system for Honda VF 750 C Magna / RC43 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 23 cm forward-mounted footrest system for Honda VF 750 C / RC09 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 11 cm forward-mounted footrest system for Honda VT 750 Black Widow / RC48 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 18 cm forward-mounted footrest system for Honda VT 750 Black Widow / RC48 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 15 cm forward-mounted footrest system forHonda VTX 1800 / SC46 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 35 cm forward-mounted footrest system for Honda CB 750 C / RC06 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany"Forward Controls Kit with German ABE11 cm forwardforHonda VT 750 Shadow / RC50Honda VT 750 Spirit / RC53The Forward Controls Kit is delivered pre-mounted with all parts required for assembly, for example with an extended brake line (if necessary).The Forward Controls Kit fixed on the original frame points.Our Forward Controls Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Forward Controls Kit are galvanically nickel-plated before powder coating.All Motorrad Burchard Forward Control Kits are supplied with a 2-year warranty on processing and chromium plating. Shift- and Brakeleversare fitted by hand and provided with grease nipples. The connecting parts (ball joints) on the shift and brakerods are free of charge and also equipped with grease nipples. This quality standard provides a minimum of play on/off the waves and a maximum oflifetime.The Forward Control Kit deliverd with a ABE from Kraftfahrt-Bundesamt, a mounting instruction and a parts list. All removable parts are available as spare parts.The Forward Controls Kit is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 21 cm forward-mounted footrest system for Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 35 cm forward-mounted footrest system for Honda CB 750 K7 / CB750K Honda CB 750 F1 / CB750F The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.