Forward-mounted footrests Kawasaki
The forward-mounted footrest system from Burchard Excellence was specially developed for the Kawasaki Eliminator 500. It ensures a relaxed riding position, improves ergonomics and gives the motorcycle an individual appearance. Made from high-quality materials and with precision and safety in mind, this product stands for German engineering and TÜV-tested quality.Brand and originThe footrest system is developed and manufactured in Germany.Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyTest statusThe system is supplied with a general operating permit (ABE). This will be available from December 2025.Note on the ABE:The enclosed ABE (General Operating Permit) allows the vehicle part to be legally installed without additional registration in the vehicle documents - provided that all requirements of the ABE are met.Vehicle compatibilitySuitable for:Manufacturer: KawasakiModel: Eliminator 500Types: EL450A, EL450B, EL450C, EL450DMaterial and surfaceThe forward-mounted footrest system is made of high-quality steel and is available in the following finishes:Nickel-platedBlack matt powder-coatedThe selection is made via the variant selection in the store.Pre-positioning and lean angle clearanceThe forward offset to the original footrest system is 23 cm.The distance is measured from the center of the original footrests or footboards to the center of the new system.To improve or maintain the lean angle clearance, the height of the new footrests is raised by around 1.5 to 2.5 cm, depending on the design.Design and design variantsFootrests:Sundance look: With several small rubber rings (O-rings) - ideal for the classic style.Ness Style Look: With wide rubber rings - for a modern, clean look.Shift and brake levers:Version: MilledThe milled levers have two slotted holes and offer a modern, minimalist design.The picture shows the Ness Style Look version with milled levers. This is a model from the sample construction phase (3D rendered).Technical featuresThe shift and brake levers can be lubricated and are fitted with H1 grease nipples.Thanks to the grease bearing design, there is no play - for precise shifting and braking operations.The rod ends can also be lubricated with spray oil, which increases the service life of the system.Care instructions:We recommend lubricating the levers completely once before the start of the season and then servicing them if necessary.Scope of deliveryCompletely pre-assembled, pre-routed footrest systemBrake line (650 mm, with 20° eyelet and M10 x 1 AG)Supply hoseHydraulic brake light switchScrew material for mountingABE (general operating permit from the Federal Motor Transport Authority)Functional description of the brake light switchThe original mechanical brake light switch is replaced by a hydraulic brake light switch. This is mounted directly in the brake cylinder instead of the original banjo bolt. The electrical connection is made via the existing original cables.Installation - brief overviewInstallation is carried out in two main steps: Brake side and shift side.All necessary components such as brake hose, brake rod, mounting springs and bushes are included in the scope of delivery.Brake side:Removal of the original footrest system and brake line, installation of the hydraulic brake light switch, re-routing of the brake line and installation of the pre-assembled system on the frame.Shift side:Disassembly of the original system and shift parts, installation of the new pre-assembled unit, connection to the shift rod and installation of the horn with enclosed bushing.Detailed installation steps with dimensions and screw positions can be found in the enclosed installation instructions.Ergonomic advantages of forward-mounted footrest systemsForward-mounted footrest systems significantly improve the riding position, especially for taller riders. The forward-shifted seating position creates more legroom and a more relaxed posture on longer journeys.In addition, the pressure on the knees and hips is reduced, making the overall riding experience more harmonious and comfortable.Spare parts serviceAll individual components of the Burchard Excellence footrest system are also available separately as spare parts.This means that the system can be easily repaired or adapted if necessary.Our customer service team will be happy to help you select the right spare part.Burchard Excellence - precision, quality and safety.Developed and manufactured in Germany for demanding motorcyclists.
"Made in Germany"Forward Controls Kit with German ABE14 cm forwardforKawasaki VN 2000 Classic / VNW00HThe Forward Controls Kit is delivered pre-mounted with all parts required for assembly, for example with an extended brake line (if necessary). The Forward Controls Kit fixed on the original frame points. Our Forward Controls Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated. In order to achieve corrosion resistance in powder coating, such as chrome, the Forward Controls Kit are galvanically nickel-plated before powder coating. All Motorrad Burchard Forward Control Kits are supplied with a 2-year warranty on processing and chromium plating. Shift- and Brakelevers are fitted by hand and provided with grease nipples. The connecting parts (ball joints) on the shift and brakerods are free of charge and also equipped with grease nipples. This quality standard provides a minimum of play on/off the waves and a maximum of lifetime. The Forward Control Kit deliverd with a ABE from Kraftfahrt-Bundesamt, a mounting instruction and a parts list. All removable parts are available as spare parts. The Forward Controls Kit is available in 2 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 10 cm forward-mounted footrest system for Kawasaki VN 1700 Classic / VNT70E The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 18 cm forward-mounted footrest system for Kawasaki VN 1700 Classic / VNT70E The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 12 cm forward-mounted footrest system for Kawasaki EN 500 / EN500C from 1996 onwards The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 12 cm forward-mounted footrest system for Kawasaki EN 500 / EN500A up to year of construction 1995 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 16 cm forward-mounted footrest system for Kawasaki VN 1600 Classic / VNT60A Kawasaki VN 1600 Mean Streak / VNT60B Suzuki VZ 1600 Marauder / VNT60B The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.
"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 17 cm forward-mounted footrest system for Kawasaki VN 1500 Mean Streak / VNT50P The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.
"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 25 cm forward-mounted footrest system for Kawasaki VN 1500 Classic / VNT50N The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.
"Made in Germany"Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 25 cm forward-mounted footrest system for Kawasaki VN 1500 Classic / VNT50D The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 20 cm forward-mounted footrest system for Kawasaki VN 1500 Vulcan - SE / VNT50A The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 45 cm forward-mounted footrest system for Kawasaki ZL 1000 / ZLT00A The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 35 cm forward-mounted footrest system for Kawasaki Z 1000 LTD / KZT00J The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 17 cm forward-mounted footrest system for Kawasaki VN 800 Vulcan - Classic / VN800A - VN800B The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 17 cm forward-mounted footrest system for Kawasaki VN 750 Vulcan / VN750A The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 35 cm forward-mounted footrest system for Kawasaki Z 750 LTD 4 cylinder / KZ750E The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany" Forward Controls Kit with German ABE 12 cm forward for Kawasaki Vulcan S / EN650AKawasaki Vulcan S / EN650DKawasaki Vulcan S / EN650DA2Kawasaki Vulcan S / EN650JA2The Forward Controls Kit is delivered pre-mounted with all parts required for assembly, for example with an extended brake line (if necessary). The Forward Controls Kit fixed on the original frame points. Our Forward Controls Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated. In order to achieve corrosion resistance in powder coating, such as chrome, the Forward Controls Kit are galvanically nickel-plated before powder coating. All Motorrad Burchard Forward Control Kits are supplied with a 2-year warranty on processing and chromium plating. Shift- and Brakelevers are fitted by hand and provided with grease nipples. The connecting parts (ball joints) on the shift and brakerods are free of charge and also equipped with grease nipples. This quality standard provides a minimum of play on/off the waves and a maximum of lifetime. The Forward Control Kit deliverd with a ABE from Kraftfahrt-Bundesamt, a mounting instruction and a parts list. All removable parts are available as spare parts. The Forward Controls Kit is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 35 cm forward-mounted footrest system for Kawasaki Z 750 LTD 2 cylinder / KZ750B The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 35 cm forward-mounted footrest system for Kawasaki Z 650 SR / KZ650 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 45 cm forward-mounted footrest system for Kawasaki ZL 600 / ZL600A - ZL600B The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 35 cm forward-mounted footrest system for Kawasaki Z 550 LTD / KZ550B The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.
"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 17 cm forward-mounted footrest system for Kawasaki VN 900 Classic / VN900B Kawasaki VN 900 Custom / VN900C The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.