Triumph forward-mounted footrests

Forward-mounted footrest system for Triumph Rocket III GTThis forward-mounted footrest system was specially developed for the Triumph Rocket III GT and significantly improves the riding position and riding comfort. The system from Burchard Excellence stands for precise workmanship, high-quality materials and reliable quality made in Germany.The ergonomically optimized forward shift ensures a more relaxed riding position and improves control of the motorcycle, especially on longer journeys.Suitable forManufacturer TriumphTrade name Rocket III GTType Y101Material and surfaceThe complete footrest system is manufactured from high-quality steel and offers a particularly durable surface finish.Available in the following finishesGlossy black powder-coatedBlack matt powder-coatedThe selection is made via the variant selection in the store.The picture shows the footrest system in matt black.Special features in the surface finishing of our footrest systemsAll systems are manufactured entirely in Germany. The components are galvanically nickel-plated before being powder-coated. This provides one hundred percent corrosion protection, even under the powder coating.Pre-installation of the footrest systemThe pre-positioning is 16 cm.The distance is measured from the center of the original footrests or the center of the footboard to the center of our pre-routed footrest system.To improve or maintain the lean angle clearance, the height level of the new footrests is raised by around 1.5 to 2.5 cm, depending on the design.Design and design variantsFootrestsThere are two design variants to choose fromSundance lookSeveral small rubber O-rings provide a classic look and go particularly well with traditional cruiser and chopper motorcycles.Ness style lookWide rubber rings provide a modern and striking look.The picture shows the footrest system in Ness style look with milled levers.Shift and brake leversThe levers are available in a milled version.In the milled version, the levers are each provided with two slotted holes and ensure a modern and minimalist look.Greasable shift and brake levers and rod endsOur shift and brake levers have grease bearings and are fitted with H1 M6 x 1 grease nipples. As a result, there is no play and precise shifting and braking operations are possible.The rod ends can also be lubricated with spray oil, which significantly increases the service life of the entire system.The matching grease gun is available as an optional accessory in our store.Care instructionsWe recommend lubricating the levers completely once before the start of each season and then servicing them as required.Test statusWith ABE general operating permit from the Federal Motor Transport Authority.The enclosed ABE makes it possible to legally install a vehicle part without additional registration in the vehicle documents, provided that all ABE requirements are met.Scope of deliveryCompletely pre-assembled pre-mounted footrest systemABE general operating permit from the Federal Motor Transport AuthorityScrew material for installationBrief overview of installationFitting the gearshift sideDismantle the original footrest systemSeparate the shift rod from the original shift partRemove original system including adapter plateOriginal gearshift unit remains mounted on the motorcycleFit the pre-routed footrest system with mounting plate MOP 7500LMount shift rod STG 7500 with rod ends MON 012Check shift linkage for free movementCheck all screws for tightnessMounting the brake sideRemove original brake cylinder and original footrest systemFit the pre-routed footrest system with mounting plate MOP 7500 RMount the brake cylinder on the bracket of the new systemFit spring MON040 and spring holder FDT001Fit brake rod BRG 125L to brake cylinder pistonConnect brake lever via rod end MON013Check that the brake can move freelyCheck that all screws are tightPlease noteThe levers can be adjusted to the desired seating position by screwing the rod ends in or out.The enclosed drawing shows which components must be fitted in which position and in which order.Check all screws regularly for tightness.Observe the tightening torques specified on the drawing.Why forward-mounted footrest systems are an advantageA forward-mounted footrest system improves ergonomics and ensures a more relaxed riding position. The legs are stretched further forward, taking the strain off the knees and hips.On large cruiser motorcycles in particular, this results in a much more pleasant riding experience on longer journeys and better control of the motorcycle.Spare parts serviceEach individual part of our footrest systems is also available as a spare part for maximum durability and uncomplicated repairs.On request, we will be happy to assist you in selecting the right spare part - simply contact our customer service.

"Made in Germany"Forward-mounted footrest system with ABE from the Federal Motor Transport Authority15 cm forward-mounted footrest systemforTriumph Bonneville Speedmaster / DV01The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.

"Made in Germany"Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 47 cm forward-mounted footrest systemforTriumph Bonneville T120 / DU01Triumph Bonneville T120 / DU01ATriumph Bonneville T120 Black / DU04The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list.All unscrewable parts are available as spare parts.The footrest system is available in 4 different designs.

"Made in Germany Pre-mounted footrest system with ABE from the Federal Motor Transport Authority -2 cm, 5 cm, 13 cm forward-mounted footrest system for Triumph Rocket III without ABS / C23XB The footrest system is 3-way adjustable. Installation is possible with -2 cm, 5 cm or 13 cm pre-positioning. The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.

"Made in Germany" Pre-mounted footrest system with ABE from the Federal Motor Transport Authority 11 cm - 19 cm - 27 cm forward-mounted footrest system for Triumph Rocket III with ABS / C20 - C23XB The footrest system is 3-way adjustable. Installation is possible with 11 cm, 19 cm or 27 cm pre-positioning. The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 13 cm forward-mounted footrest system for Triumph America / 986MK2 Triumph Speedmaster / 986ML2 The footrest system only fits models from VIN 468390 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 10 cm forward-mounted footrest system for Triumph America / 986MK2 Triumph Speedmaster / 986ML2 The footrest system only fits models up to VIN 468389 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 13 cm forward-mounted footrest system for Triumph Thunderbird Commander / B17 - BF01 Triumph Thunderbird LT / B17 - BF01 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 21 cm forward-mounted footrest system for Triumph Thunderbird Commander / B17 - BF01 Triumph Thunderbird LT / B17 - BF01 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 13 cm forward-mounted footrest system for Triumph Thunderbird Storm / B16BA - BK01 Triumph Thunderbird Night Storm / B16BA - BK01 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 21 cm forward-mounted footrest system for Triumph Thunderbird Storm / B16BA - BK01 Triumph Thunderbird Night Storm / B16BA - BK01 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany"Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 44 cm forward-mounted footrest systemforTriumph Bonneville T100 / 986MFThe footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list.All unscrewable parts are available as spare parts.The footrest system is available in 4 different designs.