APRILIA ETX 125 1999 — Matching parts & accessories
Matching parts and accessories for the APRILIA ETX 125 1999
← All model years & versions: APRILIA ETX 125
Technical Data – APRILIA ETX 125 1999
Key technical specifications of the APRILIA ETX 125 1999 at a glance.
Engine & Drivetrain
| Power | 15 PS / 11 kW · 12 PS / 9 kW |
|---|---|
| Cylinders | 1 |
| Fuel capacity | 11,0 litres |
Drive / Chain
| Chain pitch | 520 |
|---|---|
| Front sprocket (teeth) | 16 |
| Rear sprocket (teeth) | 45 |
| Chain links | 110 |
Wheels & Suspension
| Weight | 129 kg |
|---|---|
| Seat Height | 880 mm |
| Tyre pressure front | 1,5 (1,6) bar |
| Tyre pressure rear | 1,7 (1,8) bar |
| Fork oil (per leg) | 510 ml SAE 5W-20W |
| Fork oil viscosity | SAE 5W-20W |
Brakes
| Brake fluid | DOT 4 |
|---|
Maintenance
| Coolant Capacity | 750 ml |
|---|---|
| Engine oil (without filter) | 600 ml |
| Spark plug | NGK BR8ES |
| Spark plug (alternative) | NGK BPR8EIX |
| Electrode gap | 0,5-0,6 mm |
| Valve clearance (intake) | Two-stroke |
| Valve clearance (exhaust) | Two-stroke |
| Idle speed | 1500 ± 100 rpm |
| Carburettor air screw | 1,0 turns out |
| Oil Specification | Two-stroke oil |
Abbreviations explained
- DOT 4 / DOT 5 / DOT 5.1
- DOT is the US Department of Transportation standard for brake fluid; the number indicates the minimum boiling point (DOT 4 ≈ 230 °C, DOT 5.1 ≈ 260 °C). DOT 4 and DOT 5.1 are glycol-based and can be mixed. DOT 5 is silicone-based and must never be mixed with the others. Brake fluid absorbs water and needs replacing regularly.
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- Two-stroke / two-stroke oil
- A two-stroke engine has no valves, so there is no valve clearance to adjust. Lubrication comes from oil in the fuel (premix) or a separate oil pump with its own tank. This requires dedicated two-stroke oil, not regular engine oil.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- ± (tolerance)
- The ± sign states the permitted deviation: “1200 ± 100 rpm” means anything between 1100 and 1300 rpm is fine.
- Range (e.g. 0.07–0.12 mm)
- A range gives a minimum and a maximum. For valve clearance any value within the range is acceptable; if the measured value is below or above, it must be adjusted.
Missing technical data or found an error? Help us improve the data for the APRILIA ETX 125 1999!
Report dataMatching parts and accessories – APRILIA ETX 125 1999
Drive & chain
We stock 187 matching drive parts for the APRILIA ETX 125 1999. Chain, front and rear sprocket have to match each other — put your chain kit together in the configurator.
181 chains · 6 front sprockets
Here you will find 3 products suitable for the APRILIA ETX 125 1999 – vehicle-specific and universal.
Few pieces available
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Technically compatible products – APRILIA ETX 125 1999
- Brake fluid: DOT 4
- Fork oil viscosity: SAE 5W-20W
These products are technically compatible with your APRILIA ETX 125 1999 based on vehicle specifications.
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Let us know which product you need for your motorcycle.
Matching categories for the APRILIA ETX 125 1999
Parts and accessories for the APRILIA ETX 125 1999 at Motorrad Burchard
Looking for matching parts for your APRILIA ETX 125 1999? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the APRILIA ETX 125 1999 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the APRILIA ETX 125 1999
Vehicle-specific products are precisely matched to the APRILIA ETX 125 1999. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the APRILIA ETX 125 1999 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the APRILIA ETX 125 1999 now and customise your bike to your liking.
22 parts and accessories for your APRILIA ETX 125 1999
Whether Batteries, Bremsbeläge – for the APRILIA ETX 125 1999 we offer you 22 products that we have carefully checked for compatibility.
- Batteries: 2 products for the APRILIA ETX 125 1999
- Bremsbeläge: 1 product for the APRILIA ETX 125 1999
From the Batteries category we recommend TECNIUM maintenance-free battery BB9-B - activated at the factory – a high-quality accessory that perfectly fits the APRILIA ETX 125 1999.
In addition, we have identified 19 further products that also fit the APRILIA ETX 125 1999 based on technical specifications such as handlebar diameter or thread size.