BMW K 75 C (0564) 1988 — Matching parts & accessories
Matching parts and accessories for the BMW K 75 C (0564) 1988
← All model years & versions: BMW K 75 C
Technical Data – BMW K 75 C (0564) 1988
Key technical specifications of the BMW K 75 C (0564) 1988 at a glance.
Engine & Drivetrain
| Power | 75 PS / 55 kW |
|---|---|
| Cylinders | 3 |
| Fuel capacity | 21,0 litres |
Wheels & Suspension
| Weight | 235 kg |
|---|---|
| Seat Height | 810 mm |
| Tyre pressure front | 2,2 (2,5) bar |
| Tyre pressure rear | 2,5 (2,9) bar |
| Fork tube diameter | 41/41,3 Je Nach Bj |
| Fork oil (per leg) | 330 ml SAE 5W |
| Fork oil viscosity | SAE 5W |
Brakes
| Brake fluid | DOT 4 |
|---|
Maintenance
| Oil Capacity | 3,75 litres |
|---|---|
| Coolant Capacity | 2,8 litres |
| Engine oil (without filter) | 3,5 l |
| Spark plug | NGK D7EA |
| Spark plug (alternative) | NGK DR7EIX |
| Electrode gap | 0,6 mm |
| Valve clearance (intake) | Cold 0,15-0,20 mm |
| Valve clearance (exhaust) | Cold 0,25-0,30 mm |
| Idle speed | 900-1000 rpm |
| Carburettor air screw | Fuel injection 34MM |
| Oil Viscosity | SAE 20W-50 |
Abbreviations explained
- DOT 4 / DOT 5 / DOT 5.1
- DOT is the US Department of Transportation standard for brake fluid; the number indicates the minimum boiling point (DOT 4 ≈ 230 °C, DOT 5.1 ≈ 260 °C). DOT 4 and DOT 5.1 are glycol-based and can be mixed. DOT 5 is silicone-based and must never be mixed with the others. Brake fluid absorbs water and needs replacing regularly.
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- “Cold”
- “Cold” means the value is measured with the engine cold. Valve clearance changes with temperature because metal expands – measuring warm when the figure is for cold gives the wrong setting.
- Range (e.g. 0.07–0.12 mm)
- A range gives a minimum and a maximum. For valve clearance any value within the range is acceptable; if the measured value is below or above, it must be adjusted.
Missing technical data or found an error? Help us improve the data for the BMW K 75 C (0564) 1988!
Report dataMatching parts and accessories – BMW K 75 C (0564) 1988
Here you will find 6 products suitable for the BMW K 75 C (0564) 1988 – vehicle-specific and universal.
Available immediately, delivery time 1-3 days
Few pieces available
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Delivery time approx. 60 days
Available immediately, delivery time 1-3 days
Technically compatible products – BMW K 75 C (0564) 1988
- Oil Viscosity: SAE 20W-50
- Brake fluid: DOT 4
- Fork oil viscosity: SAE 5W
These products are technically compatible with your BMW K 75 C (0564) 1988 based on vehicle specifications.
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Let us know which product you need for your motorcycle.
Matching categories for the BMW K 75 C (0564) 1988
Parts and accessories for the BMW K 75 C (0564) 1988 at Motorrad Burchard
Looking for matching parts for your BMW K 75 C (0564) 1988? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the BMW K 75 C (0564) 1988 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the BMW K 75 C (0564) 1988
Vehicle-specific products are precisely matched to the BMW K 75 C (0564) 1988. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the BMW K 75 C (0564) 1988 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the BMW K 75 C (0564) 1988 now and customise your bike to your liking.
21 parts and accessories for your BMW K 75 C (0564) 1988
For the BMW K 75 C (0564) 1988 we have compiled 21 products in the areas of Air Filter, Brake, Bremsbeläge, Oil filter. All parts are either vehicle-specific tested or available as universal accessories.
- Air Filter: 1 product for the BMW K 75 C (0564) 1988
- Brake: 3 products for the BMW K 75 C (0564) 1988
- Bremsbeläge: 1 product for the BMW K 75 C (0564) 1988
- Oil filter: 1 product for the BMW K 75 C (0564) 1988
An example from our range: K&N BM-2605 Air Filter – specially suited for the BMW K 75 C (0564) 1988 in the Air Filter category.
In addition, we have identified 15 further products that also fit the BMW K 75 C (0564) 1988 based on technical specifications such as handlebar diameter or thread size.