HONDA XL 185 S (L185S) 1979 — Matching parts & accessories
Matching parts and accessories for the HONDA XL 185 S (L185S) 1979
← All model years & versions: HONDA XL 185 S
Technical Data – HONDA XL 185 S (L185S) 1979
Key technical specifications of the HONDA XL 185 S (L185S) 1979 at a glance.
Engine & Drivetrain
| Power | 17 PS / 13 kW · 9,5 PS / 7 kW |
|---|---|
| Cooling | Air-cooled |
| Cylinders | 1 |
| Fuel capacity | 7,0 litres |
Wheels & Suspension
| Weight | 118 kg |
|---|---|
| Seat Height | 820 mm |
| Tyre pressure front | 1,5 bar |
| Tyre pressure rear | 1,5-1,8 bar |
| Fork tube diameter | 31 mm Telescopic fork |
| Fork oil (per leg) | 155 ml |
Brakes
| Brake fluid | Mech.trommelbrems. |
|---|
Maintenance
| Oil Capacity | 1,1 litres |
|---|---|
| Engine oil (without filter) | 900 ml |
| Spark plug | NGK DR8ES-l |
| Spark plug (alternative) | 13 Kw: 0,6-0,7 mm |
| Electrode gap | 7 Kw: 0,5-0,6 mm |
| Valve clearance (intake) | Cold 0,05 mm |
| Valve clearance (exhaust) | Cold 0,05 mm |
| Oil Viscosity | SAE 10W-40 |
Abbreviations explained
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- “Cold”
- “Cold” means the value is measured with the engine cold. Valve clearance changes with temperature because metal expands – measuring warm when the figure is for cold gives the wrong setting.
- Range (e.g. 0.07–0.12 mm)
- A range gives a minimum and a maximum. For valve clearance any value within the range is acceptable; if the measured value is below or above, it must be adjusted.
Missing technical data or found an error? Help us improve the data for the HONDA XL 185 S (L185S) 1979!
Report dataMatching parts and accessories – HONDA XL 185 S (L185S) 1979
Drive & chain
We stock 26 matching drive parts for the HONDA XL 185 S (L185S) 1979. Chain, front and rear sprocket have to match each other — put your chain kit together in the configurator.
26 chains
Here you will find 4 products suitable for the HONDA XL 185 S (L185S) 1979 – vehicle-specific and universal.
Delivery time approx. 60 days
Available immediately, delivery time 1-3 days
Delivery time approx. 60 days
Available immediately, delivery time 1-3 days
Technically compatible products – HONDA XL 185 S (L185S) 1979
- Oil Viscosity: SAE 10W-40
These products are technically compatible with your HONDA XL 185 S (L185S) 1979 based on vehicle specifications.
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Let us know which product you need for your motorcycle.
Matching categories for the HONDA XL 185 S (L185S) 1979
Parts and accessories for the HONDA XL 185 S (L185S) 1979 at Motorrad Burchard
Looking for matching parts for your HONDA XL 185 S (L185S) 1979? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the HONDA XL 185 S (L185S) 1979 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the HONDA XL 185 S (L185S) 1979
Vehicle-specific products are precisely matched to the HONDA XL 185 S (L185S) 1979. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the HONDA XL 185 S (L185S) 1979 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the HONDA XL 185 S (L185S) 1979 now and customise your bike to your liking.
27 parts and accessories for your HONDA XL 185 S (L185S) 1979
For the HONDA XL 185 S (L185S) 1979 we have compiled 27 products in the areas of Batteries, Lever Sets, Starter. All parts are either vehicle-specific tested or available as universal accessories.
- Batteries: 2 products for the HONDA XL 185 S (L185S) 1979
- Lever Sets: 1 product for the HONDA XL 185 S (L185S) 1979
- Starter: 1 product for the HONDA XL 185 S (L185S) 1979
An example from our range: TECNIUM maintenance-free battery BTX5L - activated at the factory – specially suited for the HONDA XL 185 S (L185S) 1979 in the Batteries category.
In addition, we have identified 23 further products that also fit the HONDA XL 185 S (L185S) 1979 based on technical specifications such as handlebar diameter or thread size.