KAWASAKI ELIMINATOR 500 2024 — Matching parts & accessories
Matching parts and accessories for the KAWASAKI ELIMINATOR 500 2024
← All model years & versions: KAWASAKI ELIMINATOR 500
Technical Data – KAWASAKI ELIMINATOR 500 2024
Key technical specifications of the KAWASAKI ELIMINATOR 500 2024 at a glance.
Engine & Drivetrain
| Power | 45 PS / 33 kW |
|---|---|
| Cylinders | 2 |
| Fuel capacity | 13,0 litres |
Drive / Chain
| Chain pitch | 520 |
|---|---|
| Front sprocket (teeth) | 14 |
| Rear sprocket (teeth) | 43 |
| Chain links | 112 |
Wheels & Suspension
| Weight | 176 kg |
|---|---|
| Seat Height | 735 mm |
| Tyre pressure front | 2,0 bar |
| Tyre pressure rear | 2,3 bar |
| Fork tube diameter | 41 mm Telescopic fork |
Brakes
| Brake fluid | DOT 4 |
|---|
Maintenance
| Oil Capacity | 2,0 l |
|---|---|
| Coolant Capacity | 1,3 litres |
| Engine oil (without filter) | 1,6 l |
| Spark plug | NGK LMAR9G |
| Electrode gap | 0,7-0,8 mm |
| Idle speed | 1300 ± 50 rpm |
| Carburettor air screw | Fuel injection |
| Oil Viscosity | SAE 10W-40 |
| Oil Specification | Min. API SG |
Abbreviations explained
- DOT 4 / DOT 5 / DOT 5.1
- DOT is the US Department of Transportation standard for brake fluid; the number indicates the minimum boiling point (DOT 4 ≈ 230 °C, DOT 5.1 ≈ 260 °C). DOT 4 and DOT 5.1 are glycol-based and can be mixed. DOT 5 is silicone-based and must never be mixed with the others. Brake fluid absorbs water and needs replacing regularly.
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- API (SF, SG, SJ, SL …)
- The American Petroleum Institute classifies engine oil performance. For petrol engines the class starts with S; the second letter marks the generation – the further along the alphabet, the newer the specification (SL is newer than SG). “Min. API SG” means: use at least this class.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- ± (tolerance)
- The ± sign states the permitted deviation: “1200 ± 100 rpm” means anything between 1100 and 1300 rpm is fine.
- Range (e.g. 0.07–0.12 mm)
- A range gives a minimum and a maximum. For valve clearance any value within the range is acceptable; if the measured value is below or above, it must be adjusted.
Missing technical data or found an error? Help us improve the data for the KAWASAKI ELIMINATOR 500 2024!
Report dataMatching parts and accessories – KAWASAKI ELIMINATOR 500 2024
Here you will find 74 products suitable for the KAWASAKI ELIMINATOR 500 2024 – vehicle-specific and universal.
Available immediately, delivery time 1-3 days
Technically compatible products – KAWASAKI ELIMINATOR 500 2024
- Oil Viscosity: SAE 10W-40
- Brake fluid: DOT 4
These products are technically compatible with your KAWASAKI ELIMINATOR 500 2024 based on vehicle specifications.
Let us know which product you need for your motorcycle.
Matching categories for the KAWASAKI ELIMINATOR 500 2024
Parts and accessories for the KAWASAKI ELIMINATOR 500 2024 at Motorrad Burchard
Looking for matching parts for your KAWASAKI ELIMINATOR 500 2024? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the KAWASAKI ELIMINATOR 500 2024 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the KAWASAKI ELIMINATOR 500 2024
Vehicle-specific products are precisely matched to the KAWASAKI ELIMINATOR 500 2024. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the KAWASAKI ELIMINATOR 500 2024 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the KAWASAKI ELIMINATOR 500 2024 now and customise your bike to your liking.
104 parts and accessories for your KAWASAKI ELIMINATOR 500 2024
In our range you will find 104 matching items for the KAWASAKI ELIMINATOR 500 2024. The product range includes Accessoires, Air Filter, Attachments, Batteries, Brake – each tailored to the requirements of your motorcycle.
- Accessoires: 3 products for the KAWASAKI ELIMINATOR 500 2024
- Air Filter: 1 product for the KAWASAKI ELIMINATOR 500 2024
- Attachments: 3 products for the KAWASAKI ELIMINATOR 500 2024
- Batteries: 1 product for the KAWASAKI ELIMINATOR 500 2024
- Brake: 3 products for the KAWASAKI ELIMINATOR 500 2024
Particularly popular is HIGHSIDER pro mirror Montana-Slim black (pair), a product that is ideally suited for the KAWASAKI ELIMINATOR 500 2024 and can be found in the Accessoires category.
In addition, we have identified 30 further products that also fit the KAWASAKI ELIMINATOR 500 2024 based on technical specifications such as handlebar diameter or thread size.