KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 — Matching parts & accessories
Matching parts and accessories for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
← All model years & versions: KAWASAKI KVF 750 BRUTE FORCE
Technical Data – KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
Key technical specifications of the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 at a glance.
Engine & Drivetrain
| Power | 51 PS / 38 kW |
|---|---|
| Cylinders | 2 |
| Fuel capacity | 20,5 litres |
Wheels & Suspension
| Tyre pressure front | 2,5 bar |
|---|---|
| Tyre pressure rear | 2,5 bar |
Brakes
| Brake fluid | DOT 4 |
|---|
Maintenance
| Oil Capacity | 2,6 litres |
|---|---|
| Coolant Capacity | 2,2 litres |
| Spark plug | NGK CR7E |
| Spark plug (alternative) | NGK CR7EIX |
| Electrode gap | 0,7-0,8 mm |
| Valve clearance (intake) | Cold 0,10-0,15 mm |
| Valve clearance (exhaust) | Cold 0,20-0,25 mm |
| Idle speed | 1150 ± 50 rpm |
| Carburettor air screw | 2,15 turns out |
| Oil Viscosity | SAE 10W-40 |
Abbreviations explained
- DOT 4 / DOT 5 / DOT 5.1
- DOT is the US Department of Transportation standard for brake fluid; the number indicates the minimum boiling point (DOT 4 ≈ 230 °C, DOT 5.1 ≈ 260 °C). DOT 4 and DOT 5.1 are glycol-based and can be mixed. DOT 5 is silicone-based and must never be mixed with the others. Brake fluid absorbs water and needs replacing regularly.
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- “Cold”
- “Cold” means the value is measured with the engine cold. Valve clearance changes with temperature because metal expands – measuring warm when the figure is for cold gives the wrong setting.
- ± (tolerance)
- The ± sign states the permitted deviation: “1200 ± 100 rpm” means anything between 1100 and 1300 rpm is fine.
- Range (e.g. 0.07–0.12 mm)
- A range gives a minimum and a maximum. For valve clearance any value within the range is acceptable; if the measured value is below or above, it must be adjusted.
Missing technical data or found an error? Help us improve the data for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013!
Report dataMatching parts and accessories – KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
Here you will find 10 products suitable for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 – vehicle-specific and universal.
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Delivery time approx. 60 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Technically compatible products – KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
- Oil Viscosity: SAE 10W-40
- Brake fluid: DOT 4
These products are technically compatible with your KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 based on vehicle specifications.
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Let us know which product you need for your motorcycle.
Matching categories for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
Parts and accessories for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 at Motorrad Burchard
Looking for matching parts for your KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
Vehicle-specific products are precisely matched to the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 now and customise your bike to your liking.
40 parts and accessories for your KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
Whether Batteries, Brake, Engine & engine parts, Oil filter – for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 we offer you 40 products that we have carefully checked for compatibility.
- Batteries: 1 product for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
- Brake: 2 products for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
- Engine & engine parts: 2 products for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
- Oil filter: 5 products for the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013
From the Batteries category we recommend YUASA maintenance-free battery YTX14 FA - high-performance battery – a high-quality accessory that perfectly fits the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013.
In addition, we have identified 30 further products that also fit the KAWASAKI KVF 750 BRUTE FORCE I EPS CAMO 4WD (KVF750H) 2013 based on technical specifications such as handlebar diameter or thread size.