KTM 625 SUPERMOTO LC4 SMC 2006 — Matching parts & accessories
Matching parts and accessories for the KTM 625 SUPERMOTO LC4 SMC 2006
← All model years & versions: KTM 625 SUPERMOTO
Technical Data – KTM 625 SUPERMOTO LC4 SMC 2006
Key technical specifications of the KTM 625 SUPERMOTO LC4 SMC 2006 at a glance.
Engine & Drivetrain
| Power | 29 PS / 21 kW |
|---|---|
| Cylinders | 1 |
| Fuel capacity | 9,2 litres |
Drive / Chain
| Chain pitch | 520 |
|---|---|
| Front sprocket (teeth) | 17 |
| Rear sprocket (teeth) | 40 |
| Chain links | 110 |
Wheels & Suspension
| Weight | 154 kg |
|---|---|
| Seat Height | 910 mm |
| Tyre pressure front | 2,0 bar |
| Tyre pressure rear | 2,2 |
| Fork tube diameter | 48 mm USD fork |
| Fork oil (per leg) | SAE 5W |
| Fork oil viscosity | SAE 5W |
Brakes
| Brake fluid | DOT 5.1 |
|---|
Maintenance
| Oil Capacity | 2,1L. |
|---|---|
| Coolant Capacity | 1,0 litres |
| Spark plug | NGK DPR8E |
| Spark plug (alternative) | NGK DPR8EIX |
| Electrode gap | 0,6 mm |
| Valve clearance (intake) | Cold 0,12-0,15MM |
| Valve clearance (exhaust) | Cold 0,12-0,15MM |
| Idle speed | 1450 ± 50 rpm |
| Carburettor air screw | 2 turns out |
| Oil Viscosity | SAE 10W-50 |
| Oil Specification | JASO T903 JASO MA · fully synthetic |
Abbreviations explained
- DOT 4 / DOT 5 / DOT 5.1
- DOT is the US Department of Transportation standard for brake fluid; the number indicates the minimum boiling point (DOT 4 ≈ 230 °C, DOT 5.1 ≈ 260 °C). DOT 4 and DOT 5.1 are glycol-based and can be mixed. DOT 5 is silicone-based and must never be mixed with the others. Brake fluid absorbs water and needs replacing regularly.
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- JASO (MA, MA2, FC)
- JASO is the Japanese standard for motorcycle oils. MA and MA2 are approved for engines with an oil-bath wet clutch so the clutch does not slip; FC/FD apply to two-strokes. Car oils with friction modifiers (“energy conserving”) without JASO MA approval can make the clutch slip.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- USD fork
- An upside-down fork inverts the classic telescopic layout: the thick stanchion sits in the triple clamp, the thinner slider at the wheel. This reduces unsprung mass and makes the fork more torsionally rigid.
- fully / semi synthetic
- Mineral oil is refined directly from crude; fully synthetic oil is built up deliberately and is more thermally stable, ages more slowly and flows better when cold. Semi-synthetic is a blend. What matters is that viscosity and approvals (SAE/API/JASO) suit the engine.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- “Cold”
- “Cold” means the value is measured with the engine cold. Valve clearance changes with temperature because metal expands – measuring warm when the figure is for cold gives the wrong setting.
- ± (tolerance)
- The ± sign states the permitted deviation: “1200 ± 100 rpm” means anything between 1100 and 1300 rpm is fine.
Missing technical data or found an error? Help us improve the data for the KTM 625 SUPERMOTO LC4 SMC 2006!
Report dataMatching parts and accessories – KTM 625 SUPERMOTO LC4 SMC 2006
Here you will find 19 products suitable for the KTM 625 SUPERMOTO LC4 SMC 2006 – vehicle-specific and universal.
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Few pieces available
Available immediately, delivery time 1-3 days
Delivery time approx. 60 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Technically compatible products – KTM 625 SUPERMOTO LC4 SMC 2006
- Oil Viscosity: SAE 10W-50
- Brake fluid: DOT 5.1
- Fork oil viscosity: SAE 5W
These products are technically compatible with your KTM 625 SUPERMOTO LC4 SMC 2006 based on vehicle specifications.
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Let us know which product you need for your motorcycle.
Matching categories for the KTM 625 SUPERMOTO LC4 SMC 2006
Parts and accessories for the KTM 625 SUPERMOTO LC4 SMC 2006 at Motorrad Burchard
Looking for matching parts for your KTM 625 SUPERMOTO LC4 SMC 2006? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the KTM 625 SUPERMOTO LC4 SMC 2006 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the KTM 625 SUPERMOTO LC4 SMC 2006
Vehicle-specific products are precisely matched to the KTM 625 SUPERMOTO LC4 SMC 2006. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the KTM 625 SUPERMOTO LC4 SMC 2006 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the KTM 625 SUPERMOTO LC4 SMC 2006 now and customise your bike to your liking.
39 parts and accessories for your KTM 625 SUPERMOTO LC4 SMC 2006
In our range you will find 39 matching items for the KTM 625 SUPERMOTO LC4 SMC 2006. The product range includes Air Filter, Brake, Bremsbeläge, Bremsscheiben, Kettenkits – each tailored to the requirements of your motorcycle.
- Air Filter: 1 product for the KTM 625 SUPERMOTO LC4 SMC 2006
- Brake: 3 products for the KTM 625 SUPERMOTO LC4 SMC 2006
- Bremsbeläge: 6 products for the KTM 625 SUPERMOTO LC4 SMC 2006
- Bremsscheiben: 1 product for the KTM 625 SUPERMOTO LC4 SMC 2006
- Kettenkits: 5 products for the KTM 625 SUPERMOTO LC4 SMC 2006
Particularly popular is TECNIUM air filter - 5813 for optimum engine performance, a product that is ideally suited for the KTM 625 SUPERMOTO LC4 SMC 2006 and can be found in the Air Filter category.
In addition, we have identified 20 further products that also fit the KTM 625 SUPERMOTO LC4 SMC 2006 based on technical specifications such as handlebar diameter or thread size.