KYMCO MXU 700I EPS 2018 — Matching parts & accessories
Matching parts and accessories for the KYMCO MXU 700I EPS 2018
← All model years & versions: KYMCO MXU 700
Technical Data – KYMCO MXU 700I EPS 2018
Key technical specifications of the KYMCO MXU 700I EPS 2018 at a glance.
Engine & Drivetrain
| Power | 48 PS / 35 kW |
|---|---|
| Cooling | Liquid-cooled |
| Cylinders | 1 |
| Fuel capacity | 16,5 litres |
Wheels & Suspension
| Weight | 387 kg |
|---|---|
| Seat Height | 895 mm |
| Tyre pressure front | 0,35 bar |
| Tyre pressure rear | 0,32 bar |
Brakes
| Brake fluid | DOT 4 |
|---|
Maintenance
| Oil Capacity | 2,6 l |
|---|---|
| Engine oil (without filter) | 2,4 l |
| Spark plug | NGK CR7E |
| Spark plug (alternative) | NGK CR7EIX |
| Electrode gap | 0,6-0,7 mm |
| Valve clearance (intake) | Cold 0,08-0,12 mm |
| Valve clearance (exhaust) | Cold 0,16-0,20 mm |
| Idle speed | 1500 ± 100 rpm |
| Carburettor air screw | Fuel injection |
| Oil Viscosity | SAE 5W-50 |
| Oil Specification | API SJ · synthetisch |
Abbreviations explained
- DOT 4 / DOT 5 / DOT 5.1
- DOT is the US Department of Transportation standard for brake fluid; the number indicates the minimum boiling point (DOT 4 ≈ 230 °C, DOT 5.1 ≈ 260 °C). DOT 4 and DOT 5.1 are glycol-based and can be mixed. DOT 5 is silicone-based and must never be mixed with the others. Brake fluid absorbs water and needs replacing regularly.
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- API (SF, SG, SJ, SL …)
- The American Petroleum Institute classifies engine oil performance. For petrol engines the class starts with S; the second letter marks the generation – the further along the alphabet, the newer the specification (SL is newer than SG). “Min. API SG” means: use at least this class.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- fully / semi synthetic
- Mineral oil is refined directly from crude; fully synthetic oil is built up deliberately and is more thermally stable, ages more slowly and flows better when cold. Semi-synthetic is a blend. What matters is that viscosity and approvals (SAE/API/JASO) suit the engine.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- “Cold”
- “Cold” means the value is measured with the engine cold. Valve clearance changes with temperature because metal expands – measuring warm when the figure is for cold gives the wrong setting.
- ± (tolerance)
- The ± sign states the permitted deviation: “1200 ± 100 rpm” means anything between 1100 and 1300 rpm is fine.
- Range (e.g. 0.07–0.12 mm)
- A range gives a minimum and a maximum. For valve clearance any value within the range is acceptable; if the measured value is below or above, it must be adjusted.
Missing technical data or found an error? Help us improve the data for the KYMCO MXU 700I EPS 2018!
Report dataMatching parts and accessories – KYMCO MXU 700I EPS 2018
Here you will find 3 products suitable for the KYMCO MXU 700I EPS 2018 – vehicle-specific and universal.
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Delivery time approx. 60 days
Technically compatible products – KYMCO MXU 700I EPS 2018
- Brake fluid: DOT 4
These products are technically compatible with your KYMCO MXU 700I EPS 2018 based on vehicle specifications.
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Let us know which product you need for your motorcycle.
Matching categories for the KYMCO MXU 700I EPS 2018
Parts and accessories for the KYMCO MXU 700I EPS 2018 at Motorrad Burchard
Looking for matching parts for your KYMCO MXU 700I EPS 2018? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the KYMCO MXU 700I EPS 2018 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the KYMCO MXU 700I EPS 2018
Vehicle-specific products are precisely matched to the KYMCO MXU 700I EPS 2018. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the KYMCO MXU 700I EPS 2018 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the KYMCO MXU 700I EPS 2018 now and customise your bike to your liking.
10 parts and accessories for your KYMCO MXU 700I EPS 2018
For the KYMCO MXU 700I EPS 2018 we have compiled 10 products in the areas of Batteries, Oil filter. All parts are either vehicle-specific tested or available as universal accessories.
- Batteries: 1 product for the KYMCO MXU 700I EPS 2018
- Oil filter: 2 products for the KYMCO MXU 700I EPS 2018
An example from our range: YUASA maintenance-free battery YTX20HL FA - High-performance battery – specially suited for the KYMCO MXU 700I EPS 2018 in the Batteries category.
In addition, we have identified 7 further products that also fit the KYMCO MXU 700I EPS 2018 based on technical specifications such as handlebar diameter or thread size.