MBK SKYLINER 400 2011 — Matching parts & accessories
Matching parts and accessories for the MBK SKYLINER 400 2011
← All model years & versions: MBK SKYLINER 400
Technical Data – MBK SKYLINER 400 2011
Key technical specifications of the MBK SKYLINER 400 2011 at a glance.
Engine & Drivetrain
| Power | 33 PS / 25 kW |
|---|---|
| Cylinders | 1 |
| Fuel capacity | 14,0 litres |
Wheels & Suspension
| Weight | 197 kg |
|---|---|
| Seat Height | 750 mm |
| Tyre pressure front | 2,0 bar |
| Tyre pressure rear | 2,5 bar |
| Fork tube diameter | 41 mm Telescopic fork |
| Fork oil (per leg) | 298 ml SAE 10W |
| Fork oil viscosity | SAE 10W |
Brakes
| Brake fluid | DOT 4 |
|---|
Maintenance
| Oil Capacity | 1,7 l |
|---|---|
| Coolant Capacity | 1,57 litres |
| Engine oil (without filter) | 1,5 l |
| Spark plug | NGK CR7E |
| Electrode gap | 0,7-0,8 mm |
| Valve clearance (intake) | Cold 0,15-0,20 mm |
| Valve clearance (exhaust) | Cold 0,25-0,30 mm |
| Idle speed | 1400 - 1600 rpm |
| Carburettor air screw | Fuel injection |
| Oil Viscosity | SAE 10W-40 |
| Oil Specification | Min. API Se |
Abbreviations explained
- DOT 4 / DOT 5 / DOT 5.1
- DOT is the US Department of Transportation standard for brake fluid; the number indicates the minimum boiling point (DOT 4 ≈ 230 °C, DOT 5.1 ≈ 260 °C). DOT 4 and DOT 5.1 are glycol-based and can be mixed. DOT 5 is silicone-based and must never be mixed with the others. Brake fluid absorbs water and needs replacing regularly.
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- API (SF, SG, SJ, SL …)
- The American Petroleum Institute classifies engine oil performance. For petrol engines the class starts with S; the second letter marks the generation – the further along the alphabet, the newer the specification (SL is newer than SG). “Min. API SG” means: use at least this class.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- “Cold”
- “Cold” means the value is measured with the engine cold. Valve clearance changes with temperature because metal expands – measuring warm when the figure is for cold gives the wrong setting.
- Range (e.g. 0.07–0.12 mm)
- A range gives a minimum and a maximum. For valve clearance any value within the range is acceptable; if the measured value is below or above, it must be adjusted.
Missing technical data or found an error? Help us improve the data for the MBK SKYLINER 400 2011!
Report dataMatching parts and accessories – MBK SKYLINER 400 2011
Here you will find 1 product suitable for the MBK SKYLINER 400 2011 – vehicle-specific and universal.
Available immediately, delivery time 1-3 days
Technically compatible products – MBK SKYLINER 400 2011
- Oil Viscosity: SAE 10W-40
- Brake fluid: DOT 4
- Fork oil viscosity: SAE 10W
These products are technically compatible with your MBK SKYLINER 400 2011 based on vehicle specifications.
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Let us know which product you need for your motorcycle.
Matching categories for the MBK SKYLINER 400 2011
Parts and accessories for the MBK SKYLINER 400 2011 at Motorrad Burchard
Looking for matching parts for your MBK SKYLINER 400 2011? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the MBK SKYLINER 400 2011 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the MBK SKYLINER 400 2011
Vehicle-specific products are precisely matched to the MBK SKYLINER 400 2011. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the MBK SKYLINER 400 2011 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the MBK SKYLINER 400 2011 now and customise your bike to your liking.
35 parts and accessories for your MBK SKYLINER 400 2011
In our range you will find 35 matching items for the MBK SKYLINER 400 2011. The product range includes Fork seals – each tailored to the requirements of your motorcycle.
Particularly popular is TECNIUM fork seal ring set with dust caps - 41x53x8/10.5 mm, a product that is ideally suited for the MBK SKYLINER 400 2011 and can be found in the Fork seals category.
In addition, we have identified 34 further products that also fit the MBK SKYLINER 400 2011 based on technical specifications such as handlebar diameter or thread size.