MV AGUSTA F4 1000 RR 2010 — Matching parts & accessories
Matching parts and accessories for the MV AGUSTA F4 1000 RR 2010
← All model years & versions: MV AGUSTA F4 1000
Technical Data – MV AGUSTA F4 1000 RR 2010
Key technical specifications of the MV AGUSTA F4 1000 RR 2010 at a glance.
Engine & Drivetrain
| Power | 186 PS / 137 kW |
|---|---|
| Cooling | Liquid-cooled |
| Cylinders | 4 |
| Fuel capacity | 17,0 litres |
Drive / Chain
| Chain pitch | 525 |
|---|---|
| Front sprocket (teeth) | 15 |
| Rear sprocket (teeth) | 41 |
| Chain links | 110 |
Wheels & Suspension
| Weight | 214 kg |
|---|---|
| Seat Height | 860 mm |
| Tyre pressure front | 2,3 bar |
| Tyre pressure rear | 2,3 bar |
| Fork tube diameter | 50 mm USD fork |
| Fork oil (per leg) | 720 ml SAE 7,5W |
| Fork oil viscosity | SAE 7,5W |
Brakes
| Brake fluid | DOT 4 |
|---|
Maintenance
| Spark plug | NGK CR9EB |
|---|---|
| Spark plug (alternative) | NGK CR9EIX |
| Electrode gap | 0,7 mm |
| Valve clearance (intake) | Cold 0,15-0,24 mm |
| Valve clearance (exhaust) | Cold 0,20-0,29 mm |
| Carburettor air screw | Fuel injection |
| Oil Viscosity | SAE 10W-60 |
| Oil Specification | Min. API SJ · fully synthetic |
Abbreviations explained
- DOT 4 / DOT 5 / DOT 5.1
- DOT is the US Department of Transportation standard for brake fluid; the number indicates the minimum boiling point (DOT 4 ≈ 230 °C, DOT 5.1 ≈ 260 °C). DOT 4 and DOT 5.1 are glycol-based and can be mixed. DOT 5 is silicone-based and must never be mixed with the others. Brake fluid absorbs water and needs replacing regularly.
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- API (SF, SG, SJ, SL …)
- The American Petroleum Institute classifies engine oil performance. For petrol engines the class starts with S; the second letter marks the generation – the further along the alphabet, the newer the specification (SL is newer than SG). “Min. API SG” means: use at least this class.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- USD fork
- An upside-down fork inverts the classic telescopic layout: the thick stanchion sits in the triple clamp, the thinner slider at the wheel. This reduces unsprung mass and makes the fork more torsionally rigid.
- fully / semi synthetic
- Mineral oil is refined directly from crude; fully synthetic oil is built up deliberately and is more thermally stable, ages more slowly and flows better when cold. Semi-synthetic is a blend. What matters is that viscosity and approvals (SAE/API/JASO) suit the engine.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- “Cold”
- “Cold” means the value is measured with the engine cold. Valve clearance changes with temperature because metal expands – measuring warm when the figure is for cold gives the wrong setting.
- Range (e.g. 0.07–0.12 mm)
- A range gives a minimum and a maximum. For valve clearance any value within the range is acceptable; if the measured value is below or above, it must be adjusted.
Missing technical data or found an error? Help us improve the data for the MV AGUSTA F4 1000 RR 2010!
Report dataMatching parts and accessories – MV AGUSTA F4 1000 RR 2010
Here you will find 12 products suitable for the MV AGUSTA F4 1000 RR 2010 – vehicle-specific and universal.
Technically compatible products – MV AGUSTA F4 1000 RR 2010
- Oil Viscosity: SAE 10W-60
- Brake fluid: DOT 4
- Fork oil viscosity: SAE 7,5W
These products are technically compatible with your MV AGUSTA F4 1000 RR 2010 based on vehicle specifications.
Let us know which product you need for your motorcycle.
Matching categories for the MV AGUSTA F4 1000 RR 2010
Parts and accessories for the MV AGUSTA F4 1000 RR 2010 at Motorrad Burchard
Looking for matching parts for your MV AGUSTA F4 1000 RR 2010? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the MV AGUSTA F4 1000 RR 2010 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the MV AGUSTA F4 1000 RR 2010
Vehicle-specific products are precisely matched to the MV AGUSTA F4 1000 RR 2010. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the MV AGUSTA F4 1000 RR 2010 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the MV AGUSTA F4 1000 RR 2010 now and customise your bike to your liking.
23 parts and accessories for your MV AGUSTA F4 1000 RR 2010
Whether Accessories, Attachments, Batteries, Brake, Bremsscheiben – for the MV AGUSTA F4 1000 RR 2010 we offer you 23 products that we have carefully checked for compatibility.
- Accessories: 3 products for the MV AGUSTA F4 1000 RR 2010
- Attachments: 1 product for the MV AGUSTA F4 1000 RR 2010
- Batteries: 1 product for the MV AGUSTA F4 1000 RR 2010
- Brake: 1 product for the MV AGUSTA F4 1000 RR 2010
- Bremsscheiben: 1 product for the MV AGUSTA F4 1000 RR 2010
From the Accessories category we recommend BREMBO M4 Front Left Titanium Brake Caliper, Ø34mm – a high-quality accessory that perfectly fits the MV AGUSTA F4 1000 RR 2010.
In addition, we have identified 11 further products that also fit the MV AGUSTA F4 1000 RR 2010 based on technical specifications such as handlebar diameter or thread size.