SYM ALLO 50 4T E3 2014 — Matching parts & accessories
Matching parts and accessories for the SYM ALLO 50 4T E3 2014
← All model years & versions: SYM ALLO 50 4T
Technical Data – SYM ALLO 50 4T E3 2014
Key technical specifications of the SYM ALLO 50 4T E3 2014 at a glance.
Engine & Drivetrain
| Power | 3,2 PS / 2,3 kW |
|---|---|
| Cooling | Air-cooled |
| Cylinders | 1 |
| Fuel capacity | 5,2 litres |
Wheels & Suspension
| Weight | 100 kg |
|---|---|
| Seat Height | 680 mm |
| Tyre pressure front | 2,0 (2,25) bar |
| Tyre pressure rear | 2,0 (2,25) bar |
| Fork tube diameter | Telescopic fork |
Brakes
| Brake fluid | DOT 4 |
|---|
Maintenance
| Oil Capacity | 750 ml |
|---|---|
| Spark plug | NGK CR7HSA |
| Spark plug (alternative) | NGK CR7HIX |
| Electrode gap | 0,6-0,7 mm |
| Idle speed | 2100 ± 100 rpm |
| Oil Viscosity | SAE 10W-40 |
| Oil Specification | Min. API Sh |
Abbreviations explained
- DOT 4 / DOT 5 / DOT 5.1
- DOT is the US Department of Transportation standard for brake fluid; the number indicates the minimum boiling point (DOT 4 ≈ 230 °C, DOT 5.1 ≈ 260 °C). DOT 4 and DOT 5.1 are glycol-based and can be mixed. DOT 5 is silicone-based and must never be mixed with the others. Brake fluid absorbs water and needs replacing regularly.
- Viscosity (e.g. 10W-40)
- Viscosity describes how thick an oil is. In a multigrade oil such as 10W-40, the number before the W refers to cold behaviour (W = winter; lower is better for cold starts), the number after to viscosity at 100 °C operating temperature. A single value like 10W is a monograde oil – typical for fork oil.
- SAE
- SAE is the standard used to classify the viscosity of oils. It says nothing about the oil's quality, only about how it flows when cold and at operating temperature.
- API (SF, SG, SJ, SL …)
- The American Petroleum Institute classifies engine oil performance. For petrol engines the class starts with S; the second letter marks the generation – the further along the alphabet, the newer the specification (SL is newer than SG). “Min. API SG” means: use at least this class.
- NGK spark plug code
- The NGK code encodes the plug's full design. The digit in the middle is the heat range: the higher it is, the colder the plug (it dissipates more heat, for high loads). Letters describe thread, design and electrode material (e.g. IX = iridium). Only use plugs with the heat range specified by the manufacturer.
- PS / kW
- Power is given in kilowatts (kW, the SI unit) and metric horsepower (PS): 1 kW equals roughly 1.36 PS. Where two values appear, they usually mean the full-power and a restricted version (e.g. for licence classes).
- ± (tolerance)
- The ± sign states the permitted deviation: “1200 ± 100 rpm” means anything between 1100 and 1300 rpm is fine.
- Range (e.g. 0.07–0.12 mm)
- A range gives a minimum and a maximum. For valve clearance any value within the range is acceptable; if the measured value is below or above, it must be adjusted.
Missing technical data or found an error? Help us improve the data for the SYM ALLO 50 4T E3 2014!
Report dataMatching parts and accessories – SYM ALLO 50 4T E3 2014
Here you will find 3 products suitable for the SYM ALLO 50 4T E3 2014 – vehicle-specific and universal.
Few pieces available
Available immediately, delivery time 1-3 days
Available immediately, delivery time 1-3 days
Technically compatible products – SYM ALLO 50 4T E3 2014
- Oil Viscosity: SAE 10W-40
- Brake fluid: DOT 4
These products are technically compatible with your SYM ALLO 50 4T E3 2014 based on vehicle specifications.
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Technical fit
Let us know which product you need for your motorcycle.
Matching categories for the SYM ALLO 50 4T E3 2014
Parts and accessories for the SYM ALLO 50 4T E3 2014 at Motorrad Burchard
Looking for matching parts for your SYM ALLO 50 4T E3 2014? At Motorrad Burchard you will find a comprehensive selection of vehicle-specific and universal components. Whether handlebars, footpeg systems, lighting, seats or mounting parts – all products on this page are either specifically verified for the SYM ALLO 50 4T E3 2014 or available as universal solutions for a wide range of motorcycles.
Vehicle-specific parts for the SYM ALLO 50 4T E3 2014
Vehicle-specific products are precisely matched to the SYM ALLO 50 4T E3 2014. They fit without modifications and give you the confidence that fitment and function are guaranteed. Especially for safety-relevant components such as brakes, suspension parts or lighting, correct fitment is crucial.
Universal accessories
In addition to vehicle-specific parts, you will also find universal accessories suitable for the SYM ALLO 50 4T E3 2014 and many other motorcycles. Ideal for custom builds and modifications to your personal taste.
Discover all available parts for the SYM ALLO 50 4T E3 2014 now and customise your bike to your liking.
33 parts and accessories for your SYM ALLO 50 4T E3 2014
In our range you will find 33 matching items for the SYM ALLO 50 4T E3 2014. The product range includes Bremsbeläge, Motorcycle Cover – each tailored to the requirements of your motorcycle.
- Bremsbeläge: 1 product for the SYM ALLO 50 4T E3 2014
- Motorcycle Cover: 2 products for the SYM ALLO 50 4T E3 2014
Particularly popular is BREMBO Scooter Carbon-Ceramic Brake Pads - 07035CC, a product that is ideally suited for the SYM ALLO 50 4T E3 2014 and can be found in the Bremsbeläge category.
In addition, we have identified 30 further products that also fit the SYM ALLO 50 4T E3 2014 based on technical specifications such as handlebar diameter or thread size.