HIGHSIDER smart Custom Diamond Style grip rubber black 1 inch (pair)

HIGHSIDER smart LED license plate light, black housing, E-approvedDimensions: Height 13 mmWidth 47 mmDepth 20 mmFastening: There are two M4 bolts on the rear, hole spacing 24 mm

Handlebar "Bad Hawk" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 800 mm Height: 240 mm Depth: 180 mm Clamp width: 160 mm Handlebar width lower edge: approx. 220 mm Material: steel Finish: black matt 3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST Victory / Jackpot, Vegas Jackpot, Ness Jackpot, Hammer 8-Ball / H/J Victory / Boardwalk, Vegas 8-Ball, Ness Vegas / V/K For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Falcon Cromo Line - Slash Cut exhaust system with cat and E-mark (EG-BG)ForYamaha XVS 650 Drag Star and Classic / 4VR - 4XR - VM02 - VM03The exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of steel and high-gloss chrome. You get the typical Slash Cut design. The conversion to the Falcon Cromo Line exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 are a sample image of a mounted Cromo Line exhaust system on a Honda VT 600 Shadow. Supplied with:- Falcon Cromo Line with 1 x manifold for the rear cylinder- Mounting instructions- EG-BG documents

HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.However, there are also exceptions, e.g. HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount, so please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER LITTLE NUMBER1 LED rear light / brake light combinationPowerful LED rear light with license plate illumination, red glass.We've saved the best for last - the rear light and rear light/indicator series from HIGHSIDER give you the safety you need and the look you want - whether cruiser, scooter or speedster.Dimensions:Width: 81mmHeight: 23 mmDepth: 29 mm Hole spacing between the M4 fastening screws: 52 mm (center-to-center). Connections:Green cable = ground (-)Yellow cable = rear light (+)Blue cable = brake light (+) Scope of delivery: 1 piece

HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. The HIGHSIDER pro handlebars are made of high quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated, and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars, and a version with a pressed-in cut-out for cable routing (H-D bead) is available for use on Harley models.all HIGHSIDER pro handlebars are supplied with ABE.The range of models is huge and is expanded every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.as a rule, the assignments in the ABE are without conditions.but there are also exceptions.therefore check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.