Highway Hawk handlebar "BMX 20" 820mm wide 200 mm high for "1" (25.4 mm) clamping with 3 hole chrome TÜV

Handlebar "BMX 15" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 790mm height: 150mm Depth: 160 mm Clamp width: 160 mmHandlebar width lower edge: approx. 210mm3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Handlebar "Bad Drag" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 840 mm Height: 175 mm Depth: 160 mm Clamp width: 140 mmHandlebar width lower edge: approx. 200 mm Material: steel Surface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Handlebar "BMX 20" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 820mm height: 200mm Depth: 160 mm Clamp width: 160 mmHandlebar width lower edge: approx. 210mm Material: steel Surface: black matt3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Handlebars "Vegas 30" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 820 mm Height: 300 mm Depth: 150 mm Clamp width: 130 mmHandlebar width lower edge: approx. 210mm Material: steel Surface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C - XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG - FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I - FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI - FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC - FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS - FL1 Harley Davidson FLHR - FLHR For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Handlebar "BMX 15" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 790 mm High: 150mm Depth: 160 mm Clamping width: 160 mmHandlebarwidth lower edge: approx. 210mmMaterial: Steel Finish: dull black3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE,-CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki/ VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic.

Handlebar "Cruiser" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 830 mm Height: 130 mm Depth: 280 mm Clamp width: 330 mmHandlebar width lower edge: approx. 360 mm Material: steelSurface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST Victory / Jackpot, Vegas Jackpot, Ness Jackpot, Hammer 8-Ball / H/J Victory / Boardwalk, Vegas 8-Ball, Ness Vegas / V/K For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Narrow Ape 30" handlebars - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 700 mm Height: 280 mm Depth: 210 mm Clamp width: 130 mmHandlebar width lower edge: approx. 220 mmMaterial: steel Surface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C - XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG - FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I - FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI - FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC - FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS - FL1 Harley Davidson FLHR - FLHR For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.