Product information "Highway Hawk handlebar "Cube" 680mm wide 295 mm high for "1" (25.4 mm) clamp with 3 hole chrome TÜV"
Handlebar "Cube" - "1" (25.4 mm)
with TÜV parts certificate §19/3
width: 680mm
height: 295mm
Depth: mm
Clamp width: 89 mm
Handlebar width lower edge: approx. 210mm
Material: steel
Surface: High-gloss chrome-plated
3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips
With parts certificate according to §19/3.
The following vehicle types are listed in the parts certificate:
Harley Davidson FXDL, FXDWG - FXD
Harley Davidson FXDLI, FXDWG - FD1
Harley Davidson FXD35, FXDLI, FXDWGI - FD2
Harley Davidson FLSTCI, FLSTIFI, FLSTI, FLSTIN, FXST, FXSTB, FXSTC, SXSTD, FLSTC - FS2
Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST
For vehicles that are not listed in the certificate, the following note is included in the certificate:
If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
| Handlebar clamp: | 1" (25.4mm) |
|---|---|
| Handlebar height: | 201 mm - 300 mm |
| Handlebar width: | 601 mm - 700 mm |
| Surface: | Chrome |
Highway Hawk handlebar "Cube" 680mm wide 295 mm high for "1" (25.4 mm) clamp with 3 hole chrome TÜV
€100.51*
Available immediately, delivery time 1-3 days
Assembly in our own workshop
Lemgo, Germany · by appointment
- Professional fitting directly at the manufacturer
- On request including TÜV inspection and registration (where possible)
- Can be combined with further conversions
Non-binding · product is pre-filled
- Worldwide shipping
- Fast processing and prompt shipping
- Direct from manufacturer
- Convenient purchase on account
- Guest order possible without customer account
Customers also bought
The Flatside fuel tank, with a capacity of 3.5 gallons, is the ideal choice for Harley-Davidson riders looking for a high-quality replacement part.This tank is compatible with the 84–99 Softail and 85–86 FXWG models and is also suitable for custom frames with the Flatside mounting pattern. It can be used with screw-on fuel caps from model year 1983 onward. Please note that it is advisable to check the tank for leaks and test the fit before painting and installation. Some tanks are already painted, but this coat of paint is intended solely to protect against rust during storage.
Customers also viewed
Handlebar "Cube" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 680mm height: 295mm Depth: mm Clamp width: 89 mmHandlebar width lower edge: approx. 210mm Material: steel Finish: black matt3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Harley Davidson FXDL, FXDWG - FXDHarley Davidson FXDLI, FXDWG - FD1Harley Davidson FXD35, FXDLI, FXDWGI - FD2Harley Davidson FLSTCI, FLSTIFI, FLSTI, FLSTIN, FXST, FXSTB, FXSTC, SXSTD, FLSTC - FS2Harley Davidson FLST, FXST, FXSTB, FXSTC - FXSTFor vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebars "Vegas 30" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 820 mm Height: 300 mm Depth: 150 mm Clamp width: 130 mmHandlebar width lower edge: approx. 210mm Material: steel Surface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C - XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG - FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I - FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI - FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC - FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS - FL1 Harley Davidson FLHR - FLHR For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebar "The Boss" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 710 mm High: 320 mm Depth: 120 mm Clamping wide: 130 mm Handlebarwidth lower edge: approx. 220mmMaterial: Steel Finish: Chrome 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE,-CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki/ VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic.
Handlebar "Vegas 40" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 820mm Height: 400 mm Depth: 150 mm Clamp width: 130 mmHandlebar width lower edge: approx. 230mm Material: steel Surface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C - XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG - FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I - FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI - FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC - FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS - FL1 Harley Davidson FLHR - FLHR For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebar "Bad Ape 30" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 700 mm Height: 300 mm Depth: 220 mm Clamp width: 190 mm Handlebar width lower edge: approx. 250 mmMaterial: steel Surface: Chrome3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Narrow Ape 40" handlebars - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 700 mm Height: 400 mm Depth: 210 mm Clamp width: 130 mmHandlebar width lower edge: approx. 210 mm Material: steel Surface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C - XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG - FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I - FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI - FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC - FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS - FL1 Harley Davidson FLHR - FLHR For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebar "Tracker" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 760mm height: 80mm Depth: 90 mm Clamp width: 89 mmHandlebar width lower edge: approx. 170mm Material: steel Surface: High-gloss chrome-plated 3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Harley Davidson FXDL, FXDWG - FXDHarley Davidson FXDLI, FXDWG - FD1Harley Davidson FXD35, FXDLI, FXDWGI - FD2Harley Davidson FLSTCI, FLSTIFI, FLSTI, FLSTIN, FXST, FXSTB, FXSTC, SXSTD, FLSTC - FS2Harley Davidson FLST, FXST, FXSTB, FXSTC - FXSTFor vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.