Highway Hawk handlebars "Bad Ape" 800 mm wide 360 mm high for "1" (25.4 mm) clamp with 3 hole chrome TÜV

Handlebar "Apehanger" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 900 mm height: 410 mm Depth: 190 mm Clamp width: 190 mm Handlebar width lower edge: approx. 240 mmMaterial: steel Finish: black mattWith notches for Harley Davidson models.With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST Victory / Jackpot, Vegas Jackpot, Ness Jackpot, Hammer 8-Ball / H/J Victory / Boardwalk, Vegas 8-Ball, Ness Vegas / V/K For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Handlebar "Bad Ape" - "1" (25.4 mm) with TÜV parts certificate §19/3 "Fat Look" 32mmwidth: 800 mm Height: 260 mm Depth: 150 mm Clamp width: 140 mmHandlebar width lower edge: approx. 350 mmMaterial: steel Surface: black matt3 holes 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16Kawasaki / VN900 Classic / VN900BSuzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXSTFor vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Handlebar "Poseidon" - "1" (25.4 mm) with TÜV parts certificate §19/3Handlebar diameter 32mm. In the area of the clamps "1"" (25.4mm) Width: 900 mm Height: 120 mm Depth: 210 mm Clamp width: 135 mm Handlebar width lower edge: 240 mmMaterial: steel Surface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST Victory / Jackpot, Vegas Jackpot, Ness Jackpot, Hammer 8-Ball / H/J Victory / Boardwalk, Vegas 8-Ball, Ness Vegas / V/K For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Handlebar "Venice Beachbar" - "1" (25.4 mm) with taper to "7/8"" (22 mm) in the grip areawith TÜV parts certificate §19/3 With cross braceWidth: 940 mm Height: 80 mm Depth: 250 mm Clamp width: 160 mm Handlebar width lower edge: approx. 220 mmMaterial: steel Surface: black mattWith parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST Victory / Jackpot, Vegas Jackpot, Ness Jackpot, Hammer 8-Ball / H/J Victory / Boardwalk, Vegas 8-Ball, Ness Vegas / V/K For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Handlebar "Bad Ape" - "1" (25.4 mm)with TÜV parts certificate §19/3"Fat Look" 32mmwidth: 800 mm Height: 360 mm Depth: 150 mm Clamp width: 140 mmHandlebar width lower edge: approx. 350 mm Material: steel Finish: black matt3 holes 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Classic / VN900BSuzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXSTFor vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Fat Custom" handlebars - "1" (25.4 mm) with TÜV parts certificate §19/3 Handlebar diameter 32mm. In the area of the clamps and in the grip area "1" (25.4 mm) Width: 900 mm Height: 140 mm Depth: 400 mmClamp width: 135 mmHandlebar width lower edge: approx. 310 mm Material: steel Finish: black matt 3 holes 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST Victory / Jackpot, Vegas Jackpot, Ness Jackpot, Hammer 8-Ball / H/J Victory / Boardwalk, Vegas 8-Ball, Ness Vegas / V/K For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.