Product information "Highway Hawk handlebars "Cube" 680mm wide 295 mm high for "1" (25.4 mm) clamping with 3-hole drilling black matt TÜV"
Handlebar "Cube" - "1" (25.4 mm)
with TÜV parts certificate §19/3
width: 680mm
height: 295mm
Depth: mm
Clamp width: 89 mm
Handlebar width lower edge: approx. 210mm
Material: steel
Finish: black matt
3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips
With parts certificate according to §19/3.
The following vehicle types are listed in the parts certificate:
Harley Davidson FXDL, FXDWG - FXD
Harley Davidson FXDLI, FXDWG - FD1
Harley Davidson FXD35, FXDLI, FXDWGI - FD2
Harley Davidson FLSTCI, FLSTIFI, FLSTI, FLSTIN, FXST, FXSTB, FXSTC, SXSTD, FLSTC - FS2
Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST
For vehicles that are not listed in the certificate, the following note is included in the certificate:
If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
| Handlebar clamp: | 1" (25.4mm) |
|---|---|
| Handlebar height: | 201 mm - 300 mm |
| Handlebar width: | 601 mm - 700 mm |
| Surface: | Black Dull |
Highway Hawk handlebars "Cube" 680mm wide 295 mm high for "1" (25.4 mm) clamping with 3-hole drilling black matt TÜV
€89.15*
Available immediately, delivery time 1-3 days
- Worldwide shipping
- Same day shipping for orders placed before 10:00 a.m. (subject to availability)
- Direct from manufacturer
- Convenient purchase on account
- Guest order possible without customer account
Customers also bought
Reduction can be loud - especially on a motorcycle. The Kellermann BL 2000 Dark is proof of this. This handlebar end blinker disappears almost completely into the handlebars and only reveals its full presence at the crucial moment. The heavily tinted, ring-shaped blinker lens blends discreetly into the black metal housing and ensures a clean, modern look that perfectly complements sporty motorcycles as well as stylish chopper and cruiser conversions.During operation, the BL 2000 Dark surprises with an exceptionally bright flashing signal. This is made possible by the latest development stage of the proven Kellermann HighPower LED technology in combination with the IC-controlled Longlife Protection Guard® circuit. The result is maximum visibility with minimum installation space - a clear safety gain without compromising on design.Technical features:LED handlebar end blinker with heavily tinted blinker lensECE-approved for use on the front of motorcyclesHigh-quality black metal housingFor 12 volt DC vehicle electrical systemsØ handlebar end / max.: 29 mmLength without thread: 24 mmBenefits & advantages:You get an extremely inconspicuous blinker with impressive luminosity, durable technology and high-quality workmanship - ideal for sophisticated motorcycle conversions.Installation:Thanks to the adapters supplied, the blinker can be easily mounted on all standard handlebars. Electronic accessories may be required to adjust the flashing frequency.Make a clear statement for minimalist design and maximum safety - with the Kellermann BL 2000 Dark handlebar end blinker.
Handlebar "Anfora 30" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 740 mm Height: 300 mm Depth: 125 mm Clamp width: 140mmHandlebar width lower edge: approx. 260mm Material: steel Finish: black matt3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Customers also viewed
Handlebar "Cube" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 680mm height: 295mm Depth: mm Clamp width: 89 mmHandlebar width lower edge: approx. 210mm Material: steel Surface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Harley Davidson FXDL, FXDWG - FXDHarley Davidson FXDLI, FXDWG - FD1Harley Davidson FXD35, FXDLI, FXDWGI - FD2Harley Davidson FLSTCI, FLSTIFI, FLSTI, FLSTIN, FXST, FXSTB, FXSTC, SXSTD, FLSTC - FS2Harley Davidson FLST, FXST, FXSTB, FXSTC - FXSTFor vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebar "Vegas 40" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 820mm Height: 400 mm Depth: 150 mm Clamp width: 130 mmHandlebar width lower edge: approx. 230mm Material: steel Surface: black matt3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificateThe following vehicle types are listed in the parts certificate: Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C - XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG - FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I - FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI - FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC - FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS - FL1 Harley Davidson FLHR - FLHR For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebars "Vegas 30" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 820 mm Height: 300 mm Depth: 150 mm Clamp width: 130 mmHandlebar width lower edge: approx. 300mm Material: steel Finish: black matt3 holes 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C - XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG - FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I - FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI - FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC - FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS - FL1 Harley Davidson FLHR - FLHR For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebar "Bad Hawk" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 800 mm Height: 240 mm Depth: 180 mm Clamp width: 160 mm Handlebar width lower edge: approx. 220 mm Material: steel Finish: black matt 3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST Victory / Jackpot, Vegas Jackpot, Ness Jackpot, Hammer 8-Ball / H/J Victory / Boardwalk, Vegas 8-Ball, Ness Vegas / V/K For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Narrow Ape 30" handlebars - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 700 mm Height: 280 mm Depth: 210 mm Clamp width: 130 mmHandlebar width lower edge: approx. 220 mm Material: steel Finish: black matt3 holes 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C - XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG - FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I - FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI - FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC - FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS - FL1 Harley Davidson FLHR - FLHR For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebar "Hawk King 30" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 810 mm Height: 330 mm Depth: 165 mm Clamp width: 180 mmHandlebar width lower edge: approx. 280 mmMaterial: steel Finish: black matt3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebar "Anfora 40" - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 740 mm height: 370 mm Depth: 125 mm Clamp width: 140mmHandlebar width lower edge: approx. 230mmMaterial: steel Finish: black matt3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.