Product information "Side license plate holder for Honda VT 600 Shadow TÜV"
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificate
Discover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.
The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.
Suitable for:
Honda VT 600 Shadow type PC21
Product details:
Brand: Burchard Excellence
Country of origin: Germany - Made in Germany
Material: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steel
License plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mm
Lighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illumination
Mounting: Pre-assembled. All screws required for mounting are included in the scope of delivery
Scope of delivery:
Side license plate holder completely pre-assembled
LED license plate light
TÜV parts certificate
Fastening material
Additional information:
The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.
Important vehicle-specific information and requirements:
Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.
The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.
The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.
Original lighting equipment remains unaffected.
The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.
| Motorcycle manufacturer: | Honda |
|---|---|
| Motorcycle trade name: | VT 600 Shadow |
| Motorcycle type: | PC21 |
Side license plate holder for Honda VT 600 Shadow TÜV
€299.00*
Few pieces available, delivery time 6-11 days
Assembly in our own workshop
Lemgo, Germany · by appointment
- Professional fitting directly at the manufacturer
- On request including TÜV inspection and registration (where possible)
- Can be combined with further conversions
Non-binding · product is pre-filled
- Worldwide shipping
- Fast processing and prompt shipping
- Direct from manufacturer
- Convenient purchase on account
- Guest order possible without customer account
Reflector with holder for side license plate holder from Motorrad BurchardThe reflector with holder is mounted on the license plate.Included in the scope of delivery:1 piece
Customers also viewed
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificateDiscover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.Suitable for:Honda VT 600 Shadow type PC21Product details:Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyMaterial: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steelLicense plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mmLighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illuminationMounting: Pre-assembled. All screws required for mounting are included in the scope of deliveryScope of delivery:Side license plate holder completely pre-assembledLED license plate lightTÜV parts certificateFastening materialAdditional information:The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.Important vehicle-specific information and requirements:Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.Original lighting equipment remains unaffected.The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.
Burchard Excellence seat for Honda VT 600 Shadow (PC21)This high-quality seat bench from Burchard Excellence is the ideal solution for anyone who values comfort, durability and an individual look. Developed for the Honda VT 600 Shadow (type PC21), it impresses with its precise fit and meticulous craftsmanship - 100 percent Made in Germany.Brand and originBurchard Excellence stands for quality and experience in the field of motorcycle parts. Each seat is manufactured entirely in Germany - by hand and with the highest standards of material and workmanship.Design and variant overviewThis seat is available in the Hardrider version. The slim design and compact shape emphasize the sporty lines of the vehicle and create a unique look.Vehicle compatibilityThe seat fits the following models:Manufacturer: HondaModel designation: VT 600 ShadowType: PC21Material and structureThe seat is covered with robust artificial leather, which is glued over the entire surface without staples. The upholstery consists of an approx. 4-5 cm thick composite foam, which offers pleasant seating comfort. A film on the underside protects the bench from moisture.The bench is supplied in black as standard. On request, you can choose from 18 other surface finishes (see product images). You can request your desired colors by sending an e-mail to info@burchard-gmbh.de, stating the order number.Basic construction and qualityThe basis is a solid base plate made of galvanized steel, which offers high stability and reliable corrosion protection. Compared to many GRP benches on the market, this construction is significantly more durable and resistant.Processing and paint protectionThe artificial leather is glued over the entire surface and additionally provided with a felt carpet pad. This reliably protects the vehicle paintwork from scratches. The workmanship is carefully crafted and guarantees a perfect fit.InstallationInstallation is a simple 1:1 replacement process. The seat is attached to the original mounting points. A TÜV registration or ABE is not required as it is an approved replacement part. All components required for installation are included in the scope of delivery. Installation usually takes no longer than 15-20 minutes and can be carried out using standard tools.Appearance and seating comfortThe design gives the vehicle a sleek line and an individual look. The look is sporty, compact and particularly popular with individualists and customizing fans. The well-balanced upholstery ensures a comfortable ride - even on longer journeys.Care instructionsA soft, damp cloth is sufficient for cleaning. Please do not use any solvents. To keep the material supple and protect it from UV radiation, we recommend the use of special artificial leather care products.Delivery time and customizationAs each bench is individually upholstered, the delivery time is approx. 10-14 working days. Special requests or individual colors can be requested separately. In this case you will receive an individual offer.Spare parts and repair serviceIndividual components of the bench are available as spare parts if required. We can also overhaul damaged benches on request. Please contact our customer service for this.
A lower silhouette gives your Honda VT 600 Shadow that unmistakable chopper character. With this shock absorber lowering kit, you can lower the rear of your motorcycle by approx. 4.5 cm and thus ensure a stretched line, a firm stance and an authentic cruiser look - in the style of classic conversions.Technical features:Suitable for original shock absorbers of the Honda VT 600 Shadow / PC21Lowering approx. 4.5 cm (measured above the rear wheel center/axle center)Material: galvanized steelIncluding plastic stop bushing and spacer/ring componentsSupplied with all parts required for installationWithout TÜV parts certificate (not approved for use on public roads)The lowering kit is robustly manufactured and designed for permanent loading. The conversion lowers the center of gravity both visually and in terms of driving dynamics, which is particularly noticeable when stationary and during slow maneuvers.Installation is carried out directly on the shock absorber and requires the use of a spring compressor. After compressing the spring, the shock absorber head is removed, the ring and the plastic bushing supplied are fitted and then everything is professionally reassembled.On request, you can also have the conversion carried out by us. Perfect for custom projects, show bikes or racetrack conversions.
"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 Honda VT 1100 Shadow / SC23 Honda VT 1100 ACE C2 / SC32 Honda VT 1100 ACE C3 / SC39 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the expert opinion. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.
Minimalism meets maximum effect: the Kellermann Atto® DF is a real statement for modern motorcycle rear ends. The blinker is extremely compact, with a matt black metal housing and clear glass look - technical, precise and uncompromisingly high-quality. With its almost disappearing size, the Atto® DF fits perfectly into purist chopper and cruiser conversions and allows the design of your motorcycle to make a grand entrance.The Atto® DF combines blinker, tail light and brake light in a single, globally approved 3in1 housing. Despite a light surface that fits four times the size of a 1-cent coin, it delivers impressive luminosity. This is made possible by the combination of Kellermann HighPower LED technology and EXtranz® Extreme Optical Transparency Technology, which directs the light precisely and emits it outwards extremely efficiently.Technical highlights:3in1 function: blinker, rear and brake lightECE-approved for rearHigh-quality metal housing in blackClear glass cover, modern and unobtrusiveM5 x 0.5 x 6.5 mm mounting threadDimensions: length 14 mm, Ø max. 10 mm, glass Ø 7.8 mmFor 12 volt DC wiring systemsThe Atto® DF replaces the original rear and brake light as well as the indicators and thus ensures a tidy, modern rear look. It can be fitted universally and all the electronics are securely integrated in the housing. Depending on the vehicle, electronic accessories may be required to adjust the flashing frequency.Rely on uncompromising technology, iconic design and maximum visibility - with the Kellermann Atto® DF you can turn your motorcycle rear into a real eye-catcher. Discover now and redefine how minimal motorcycle lighting can be.