Product information "Side license plate holder for Honda VT 600 Shadow TÜV"
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificate
Discover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.
The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.
Suitable for:
Honda VT 600 Shadow type PC21
Product details:
Brand: Burchard Excellence
Country of origin: Germany - Made in Germany
Material: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steel
License plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mm
Lighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illumination
Mounting: Pre-assembled. All screws required for mounting are included in the scope of delivery
Scope of delivery:
Side license plate holder completely pre-assembled
LED license plate light
TÜV parts certificate
Fastening material
Additional information:
The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.
Important vehicle-specific information and requirements:
Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.
The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.
The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.
Original lighting equipment remains unaffected.
The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.
| Motorcycle manufacturer: | Honda |
|---|---|
| Motorcycle trade name: | VT 600 Shadow |
| Motorcycle type: | PC21 |
Side license plate holder for Honda VT 600 Shadow TÜV
€299.00*
Few pieces available, delivery time 4-9 days
Assembly in our own workshop
Lemgo, Germany · by appointment
- Professional fitting directly at the manufacturer
- On request including TÜV inspection and registration (where possible)
- Can be combined with further conversions
Non-binding · product is pre-filled
- Worldwide shipping
- Fast processing and prompt shipping
- Direct from manufacturer
- Convenient purchase on account
- Guest order possible without customer account
Reflector with holder for side license plate holder from Motorrad BurchardThe reflector with holder is mounted on the license plate.Included in the scope of delivery:1 piece
Customers also viewed
"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Yamaha XVS 650 Drag Star - Classic / 4VR - 4XR - VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star - Classic / VP05 - VP16 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are available in either high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the expert opinion. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.
Burchard Excellence side license plate holder - Made in Germany with TÜV parts certificateGive your motorcycle an individual and high-quality finish with the side license plate holder from Burchard Excellence. This product is manufactured in Germany and stands for the highest quality workmanship and precision.The holder is supplied including LED license plate lighting and comes with a TÜV parts certificate in accordance with §19 Para. 3 StVZO. The certificate confirms the technical permissibility of the conversion in compliance with certain conditions and vehicle-specific instructions. The operating license only remains valid if the conversion is fitted correctly in accordance with the instructions and the information is implemented in full.Suitable for:Honda VT 750 ACE C2 / Type: RC44 / Type approval: e4*92/61*0102*Honda VT 750 Black Widow / Type: RC48 / Type approval: e4*92/61*0085*Material:The license plate holder is made of robust steel. You have the choice between a high-gloss chrome-plated surface, nickel-plated version with black gloss coating or black matt powder coating. The selection is made conveniently via the variant option in the store.License plate size:Suitable for almost all European license plate sizes. The suitable base plate can also be selected via the variant option. Permitted formats include:Germany: 180x200 mm to 220x200 mmAustria: 210x170 mmSwitzerland: 180x140 mmDenmark: 230x170 mmFrance: 170x130 mmNetherlands: 210x145 mmItaly: 175x175 mmand many moreLighting:The holder is supplied with high-quality LED license plate lighting. This has three SMD diodes and is E-approved. It guarantees even and bright illumination of the license plate.Installation:The side license plate holder is supplied pre-assembled. All screws required for mounting are included in the scope of delivery. It is mounted on the original wheel plug-in axle of the vehicle.Scope of delivery:Completely pre-assembled side license plate holderLED license plate lightTÜV parts certificateFastening materialImportant note on mounting:A centric M14x1.50x30 mm thread must be inserted into the original axle for fastening to the quick-release wheel axle. We provide this service free of charge when you purchase the item.Vehicle-specific requirements and instructions according to TÜV parts certificate:Installation must be carried out properly and professionally in accordance with the installation instructions or the manufacturer's specifications.The MB20 license plate holder is suitable for official license plates on motorcycles in accordance with Annex 4 of the FZV. The versions smaller than 220 do not justify any claim to the allocation of corresponding license plates.The license plate must not protrude beyond the vehicle width according to the handlebars. For wider handlebars, a separate assessment by an officially recognized expert is required.The glass of the original license plate light must be completely covered with the enclosed film.The original wheel cover below the rear light must be shortened.Translated with DeepL.com (free version)
Frame change for Bobber conversionFor Honda VT 600 Shadow / PC21First, the frame is clamped into a teaching and restiffened. For this purpose, we weld in a crossbar. We then shorten the frame and weld the ends with sheets. At the end, we put up a serial number and carry out the TÜV inspection.We are also happy to carry out further work for you.Please note that you will need to deliver your vehicle.Are you interested in the conversion? We are happy to answer any further questions by e-mail or phone.
NGK Laser Iridium Spark Plug - IMR9C-9H - NGK is one of the world's leading manufacturers of spark plugs and ignition technology. As an established original equipment manufacturer, the company supplies numerous vehicle manufacturers with high-quality ignition components. NGK spark plugs are specially developed to ensure optimum engine performance, high thermal resistance and a long service life. Thanks to continuous investment in research and development, the NGK range offers innovative solutions for almost all engines and requirements. Ideal for demanding bikers and motorsport enthusiasts who value quality and performance.
Handlebars "Wishbone" - "1" (25.4 mm) with TÜV Parts Certificate §19/3 Handlebar diameter 32mm. In the area of the clamps "1" (25.4 mm). Width: 800 mm Height: 200 mm Depth: 90 mm Clamping width: 115 mm Material: Steel Surface: Glossy chrome-plated with TÜV Parts Certificate §19/3 Honda VT600 Shadow / PC21 For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic.
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificateDiscover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.Suitable for:Honda VT 600 Shadow type PC21Product details:Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyMaterial: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steelLicense plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mmLighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illuminationMounting: Pre-assembled. All screws required for mounting are included in the scope of deliveryScope of delivery:Side license plate holder completely pre-assembledLED license plate lightTÜV parts certificateFastening materialAdditional information:The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.Important vehicle-specific information and requirements:Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.Original lighting equipment remains unaffected.The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.