Side license plate holder for Honda VT 600 Shadow TÜV

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Yamaha XV 950 Bolt / VN03 - VN07 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

Frame change for Bobber conversionFor Honda VT 600 Shadow / PC21First, the frame is clamped into a teaching and restiffened. For this purpose, we weld in a crossbar. We then shorten the frame and weld the ends with sheets. At the end, we put up a serial number and carry out the TÜV inspection.We are also happy to carry out further work for you.Please note that you will need to deliver your vehicle.Are you interested in the conversion? We are happy to answer any further questions by e-mail or phone.

Matching accessories for the article

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Chrome

€39.95*

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Chrome

€39.95*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

Stück

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions. *

 

"Made in Germany"Triple Tree Kit 5° degree rake 290mm wide with TÜV Test Report §19/3forHonda VT 600 Shadow / PC21All original parts such as fenders, headlights, speedometer units, control units, stand tube panels etc. can be still used.The Triple Tree Kit is supplied with the necessary accessories such as a new axle, distance material for front wheel, brake system, fender, etc.The steering head bearing can be taken from the original Triple Tree Kit.In most cases, the original risers cannot be taken over.All removable parts are available as spare parts.Picture 2 is an example illustration and shows the Triple Tree Kit in mounted in a Honda VT 600 Shadow.In the Triple Tree Kit, 3.50 x16" rims with a maximum tyre width of 130 or 150 mm can be installed.Our Triple Tree Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Triple Tree Kit are galvanically nickel-plated before powder coating.The Triple Tree Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. If you have any questions about the product, please contact us by phone at 05261 / 97710 or mail.

HIGHSIDER tarpaulinThe perfect outdoor protection for two-wheelers: High-quality tarpaulin made from elastic, tear-resistant, waterproof and UV-resistant high-tech fiber. With rubberized seams, the hard-wearing motorcycle cover offers the best protection against rain, dew or other moisture. The extremely robust cover has a soft inner fleece and is therefore particularly gentle on the paintwork, even with daily use. Designed for road motorcycles, it meets the highest requirements of two-wheeled riders, not least due to the integrated ventilation openings, heat protection on both sides and reinforced lock eyelet for anti-theft protection. It is attached to the motorcycle with an adjustable click fastener. High-contrast, white HIGHSIDER lettering on the long sides of the black tarpaulin and the white HIGHSIDER logo on the back visually emphasize this premium product. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike to your liking. Determine the correct size of your cover by measuring the length, width and height of your motorcycle/scooter and comparing them with the dimensions given. Dimensions:Size S:Length: 183 cmWidth: 80 cm Height: 115 cmFits most 50 cc scooters.Size M:Length: 203 cmWidth: 80 cm Height: 120 cmFits most light motorcycles (80/125 cc and supersports/superbikes.Size L:Length: 229 cmWidth: 89 cm Height: 125 cmFits most naked bikes.Size XL:Length: 246 cmWidth: 94 cm Height: 130 cmFits most choppers and small touring bikes.Size XXL:Length: 264 cmWidth: 105 cm Height: 135 cmSuitable for large cruisers and touring bikes.Scope of delivery: 1 piece incl. practical carrying bag

Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificateDiscover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.Suitable for:Honda VT 600 Shadow type PC21Product details:Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyMaterial: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steelLicense plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mmLighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illuminationMounting: Pre-assembled. All screws required for mounting are included in the scope of deliveryScope of delivery:Side license plate holder completely pre-assembledLED license plate lightTÜV parts certificateFastening materialAdditional information:The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.Important vehicle-specific information and requirements:Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.Original lighting equipment remains unaffected.The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.