Side license plate holder for Honda VT 600 Shadow TÜV

Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificateDiscover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.Suitable for:Honda VT 600 Shadow type PC21Product details:Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyMaterial: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steelLicense plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mmLighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illuminationMounting: Pre-assembled. All screws required for mounting are included in the scope of deliveryScope of delivery:Side license plate holder completely pre-assembledLED license plate lightTÜV parts certificateFastening materialAdditional information:The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.Important vehicle-specific information and requirements:Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.Original lighting equipment remains unaffected.The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.

Seat Kit complete with black springs and bracketPillowcase: Imitation leather black,Pattern: Of choiceThread: Of choiceIncluded in the delivery:1 x Seat2 x Springs1 x Cover Plate1 x Bracket for cover plate1 x HingeThe Seat Kit can only be installed in conjunction with the Bobber Kit and does not fit on the original fender.

Regulator coverfor Honda VT 600 Shadow / PC21 All assembly materials required for assembly are included. The picture shows the regulator cover attached to the vehicle.Included in delivery:1 piece

Matching accessories for the article

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Chrome

€39.95*

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Chrome

€39.95*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

Stück

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions. *

 

The side license plate holder from Burchard Excellence is a high-quality solution for moving the license plate to the side and has been specially developed for a clean, tidy vehicle finish. It is ideal for custom conversions and replaces the standard license plate holder with a technically and legally tested alternative. Developed and manufactured in Germany, this product stands for precise workmanship and long-lasting quality.As a product of the Burchard Excellence brand, the license plate holder is manufactured entirely in Germany. The construction is designed for durability and accuracy of fit and meets all relevant legal requirements. The holder is supplied with TTG part type approval. A part type approval is a national approval from the Federal Motor Transport Authority and confirms that the component meets the legal requirements and may be used on the motorcycle models listed in the approval. Please refer to the vehicle list and the specified requirements.Suitable forThe side license plate holder is suitable for:Manufacturer KawasakiTrade name Eliminator 500Type EL450ATypgenehmigunge1168/201300347*Material and surfaceManufactured from high-quality steel, the license plate holder is available in a nickel-plated version or black matt powder-coated. Both versions offer reliable corrosion protection and a durable surface for long-term use.Available license plate sizesThe holder is designed for many European license plate sizes, includingGermany 180x200 mm to 220x200 mmAustria 210x170 mmSwitzerland 180x140 mmDenmark 230x170 mmFrance 170x130 mmNetherlands 210x145 mmThe desired license plate size is conveniently selected via the variant selection in the store.LightingThe scope of delivery includes LED license plate lighting with three SMD diodes. This is E-approved in accordance with StVZO and ensures uniform, legally compliant illumination of the license plate.Scope of deliveryThe delivery includes a completely pre-assembled side license plate holder including LED license plate lighting, part type approval from the KBA, cable set for extending the power cables and the necessary screw material.Fitting instructionsTo fit, the nut on the wheel plug-in axle is loosened and the original axle removed. The pre-assembled bracket is pushed onto the axle and fitted using the BM16x1.5 nut supplied, the A16 circlip and the original washer. The license plate light is then connected and a function test is carried out. All screws must be checked for tightness. The tightening values specified by the manufacturer remain unchanged and can be requested from the respective authorized dealer if required.Vehicle-related requirements and instructionsThe conversion parts must be fitted properly and professionally in accordance with the installation instructions and the vehicle manufacturer's specifications. The MB20 license plate holder is suitable for official license plates on motorcycles in accordance with vehicle registration regulations. The fitting of specific versions does not constitute a claim to the allocation of a specific license plate size. The original lighting equipment is not affected by the installation. The glass of the original license plate light must be completely covered with the film supplied.Advantages of the side license plate holderThe lateral positioning creates a significantly reduced and tidy look at the rear, ideal for bobber, chopper or cafe racer conversions. At the same time, full legal compliance is maintained, as the license plate angle, mounting and illumination comply with legal requirements. The holder can also be easily combined with other accessories and offers a high degree of flexibility when customizing.