Side license plate holder for Honda VT 600 Shadow TÜV

HIGHSIDER pro steel handlebars - 25.4mm in the clamping area / 22.2mm in the grip areaHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and the manufacturing quality of the handlebars, which has been optimized over decades. 25.4/22.2 mm handlebars impress with their high bending stiffness. The basis for this stability of the handlebars is the larger diameter in the clamping area. The diameter of the handlebars is 25.4 mm (3 mm wall thickness) in the clamping area and 22.2 mm (wall thickness 2 mm, inner Ø 18 mm) in the area of the switch and handlebar fitting, and the surface is highly polished and chrome-plated or black KTL-coated. The handlebars are supplied without holes for the anti-rotation lock of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.However, there are also exceptions, so please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., and wipe off any dripping immediately with a clean cloth. avoid contact with brake fluid, oil, fuel, polishing pastes with abrasive particles, etc., and wipe up any drips immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use!

Matching accessories for the article

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Chrome

€39.95*

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Chrome

€39.95*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

Stück

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions. *

 

Frame change for Bobber conversionFor Honda VT 600 Shadow / PC21First, the frame is clamped into a teaching and restiffened. For this purpose, we weld in a crossbar. We then shorten the frame and weld the ends with sheets. At the end, we put up a serial number and carry out the TÜV inspection.We are also happy to carry out further work for you.Please note that you will need to deliver your vehicle.Are you interested in the conversion? We are happy to answer any further questions by e-mail or phone.

Matching accessories for the article

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Chrome

€39.95*

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Chrome

€39.95*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

Stück

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions. *

 

Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificateDiscover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.Suitable for:Honda VT 600 Shadow type PC21Product details:Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyMaterial: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steelLicense plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mmLighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illuminationMounting: Pre-assembled. All screws required for mounting are included in the scope of deliveryScope of delivery:Side license plate holder completely pre-assembledLED license plate lightTÜV parts certificateFastening materialAdditional information:The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.Important vehicle-specific information and requirements:Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.Original lighting equipment remains unaffected.The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.

High-quality side license plate holder for your Triumph Rocket IIIThe side license plate holder from Burchard Excellence was specially developed for the Triumph Rocket III and ensures a much tidier rear view. The design combines high-quality materials, precise workmanship and a legally compliant design. It goes without saying that it is manufactured in Germany and meets the highest quality standards.Thanks to the integrated part type approval from the Federal Motor Transport Authority, you receive a technically tested and legally compliant solution for the conversion of your motorcycle.Burchard Excellence - Made in GermanyThe side license plate holder comes from the Burchard Excellence product line and is manufactured entirely in Germany. The use of high-quality materials and modern production technologies results in a durable product with a high fitting accuracy.With TTG from the Federal Motor Transport AuthorityWith TTG (part type approval). A part type approval is a national approval from the Federal Motor Transport Authority (KBA) for vehicle parts. It confirms that the part meets the legal requirements and may be used on the motorcycle models listed in the approval. Please observe the vehicle list and the respective conditions of the approval.The TTG supplied means that no additional registration is required.Suitable for the following vehiclesManufacturer: TriumphCommercial designation: Rocket III GT and Rocket III StormType: Y101Typgenehmigung:e9168/201311453*Please check that your vehicle data matches before ordering.Material and surfacesThe license plate holder is made of high-quality steel and is available in various finishes:High-gloss chrome-platedNickel-plated and glossy black powder-coatedNickel-plated and matt black powder-coatedThe desired finish can be easily selected via the variant selection.Available license plate sizesThe license plate holder is available for numerous European license plate sizes.Examples:Germany: 180 x 200 mm to 220 x 200 mmAustria: 210 x 170 mmSwitzerland: 180 x 140 mmDenmark: 230 x 170 mmFrance: 170 x 130 mmNetherlands: 210 x 145 mmItaly: 175 x 175 mmOther license plate sizes are available. The selection is made via the variant selection in the store.LED license plate lighting includedThe side license plate holder is supplied with high-quality LED license plate lighting.Technical features:3 SMD diodesE-approved according to StVZOOptimum illumination of the license plateCompact and inconspicuous designScope of deliveryYou will receive a completely pre-assembled side license plate holder included:LED license plate lightTTG from the Federal Motor Transport AuthorityCable set for extending the power cableScrew materialBlinker holderReflectorFitting instructionsPreparation and removal of the original license plate holderFirst remove the cable cover on the swing arm to gain access to the electrical cables.Then disconnect the electrical cables directly at the original license plate holder.Now completely remove the original license plate holder from the vehicle.Then carefully pull the blinker cables back towards the vehicle.Important note:The cables for the license plate illumination remain on the side license plate holder. Therefore, only the blinker cables need to be routed back.Fitting the side license plate holderFit the pre-assembled side license plate holder to the original mounting points on the swingarm.Use the vehicle's original fastening screws for this.Also use the spring washers and washers supplied.Fitting the blinker holderFit the supplied blinker holder to the original fixing points under the mudguard.Use the screws and spacer bushes supplied for this.Then fit indicators of your choice with a valid E number.Connecting the indicatorsConnect the indicators to the vehicle cables that were previously laid back.Ensure that all electrical connections are properly insulated and protected.Fitting the cover plateOnce the indicators have been fitted and connected, attach the cover plate of the blinker holder.Use the screws supplied for this.Then glue the supplied reflector to the center of the cover plate.Advantages of the side license plate holderTidy vehicle appearanceMoving the license plate to the side of the vehicle ensures a much slimmer and tidier rear view. This creates an individual look, especially for bobber, chopper and cafe racer conversions.Individual design optionsThe license plate holder can be optimally combined with other accessories. These include, for example, blinker holders, reflector holders or other customizing components.Legally compliant conversionThe design takes into account the legal requirements regarding license plate position, license plate angle and license plate illumination. This provides you with a technically tested and legally compliant solution for your motorcycle conversion.