Side license plate holder for Honda VT 600 Shadow TÜV

Frame change for Bobber conversionFor Honda VT 600 Shadow / PC21First, the frame is clamped into a teaching and restiffened. For this purpose, we weld in a crossbar. We then shorten the frame and weld the ends with sheets. At the end, we put up a serial number and carry out the TÜV inspection.We are also happy to carry out further work for you.Please note that you will need to deliver your vehicle.Are you interested in the conversion? We are happy to answer any further questions by e-mail or phone.

Matching accessories for the article

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Black Glossy

€39.95*

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Black Glossy

€39.95*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

Stück

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions. *

 

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 Honda VT 1100 Shadow / SC23 Honda VT 1100 ACE C2 / SC32 Honda VT 1100 ACE C3 / SC39 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the expert opinion. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

Falcon Cromo Line - Slash Cut slip on system with cat and E-mark (EG-BG)ForSuzuki LS 650 Savage / NP41BThe exhaust system is supplied as a slip on system installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of steel and high-gloss chrome. You get the typical Slash Cut design. The conversion to the Falcon Cromo Line exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 are a sample image of a mounted Cromo Line exhaust system on a Honda VT 600 Shadow. Supplied with:- Falcon Cromo Line slip on system- Mounting instructions- EG-BG documents

Matching accessories for the article

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Black Glossy

€39.95*

Reflector with holder for side license plate holder from Motorrad Burchard

Surface: Black Glossy

€39.95*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

Stück

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions. *

 

Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificateDiscover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.Suitable for:Honda VT 600 Shadow type PC21Product details:Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyMaterial: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steelLicense plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mmLighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illuminationMounting: Pre-assembled. All screws required for mounting are included in the scope of deliveryScope of delivery:Side license plate holder completely pre-assembledLED license plate lightTÜV parts certificateFastening materialAdditional information:The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.Important vehicle-specific information and requirements:Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.Original lighting equipment remains unaffected.The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.

The side license plate holder from Burchard Excellence is a high-quality solution for moving the license plate to the side and has been specially developed for a clean, tidy vehicle finish. It is ideal for custom conversions and replaces the standard license plate holder with a technically and legally tested alternative. Developed and manufactured in Germany, this product stands for precise workmanship and long-lasting quality.As a product of the Burchard Excellence brand, the license plate holder is manufactured entirely in Germany. The construction is designed for durability and accuracy of fit and meets all relevant legal requirements. The holder is supplied with TTG part type approval. A part type approval is a national approval from the Federal Motor Transport Authority and confirms that the component meets the legal requirements and may be used on the motorcycle models listed in the approval. Please refer to the vehicle list and the specified requirements.Suitable forThe side license plate holder is suitable for:Manufacturer KawasakiTrade name Eliminator 500Type EL450ATypgenehmigunge1168/201300347*Material and surfaceManufactured from high-quality steel, the license plate holder is available in a nickel-plated version or black matt powder-coated. Both versions offer reliable corrosion protection and a durable surface for long-term use.Available license plate sizesThe holder is designed for many European license plate sizes, includingGermany 180x200 mm to 220x200 mmAustria 210x170 mmSwitzerland 180x140 mmDenmark 230x170 mmFrance 170x130 mmNetherlands 210x145 mmThe desired license plate size is conveniently selected via the variant selection in the store.LightingThe scope of delivery includes LED license plate lighting with three SMD diodes. This is E-approved in accordance with StVZO and ensures uniform, legally compliant illumination of the license plate.Scope of deliveryThe delivery includes a completely pre-assembled side license plate holder including LED license plate lighting, part type approval from the KBA, cable set for extending the power cables and the necessary screw material.Fitting instructionsTo fit, the nut on the wheel plug-in axle is loosened and the original axle removed. The pre-assembled bracket is pushed onto the axle and fitted using the BM16x1.5 nut supplied, the A16 circlip and the original washer. The license plate light is then connected and a function test is carried out. All screws must be checked for tightness. The tightening values specified by the manufacturer remain unchanged and can be requested from the respective authorized dealer if required.Vehicle-related requirements and instructionsThe conversion parts must be fitted properly and professionally in accordance with the installation instructions and the vehicle manufacturer's specifications. The MB20 license plate holder is suitable for official license plates on motorcycles in accordance with vehicle registration regulations. The fitting of specific versions does not constitute a claim to the allocation of a specific license plate size. The original lighting equipment is not affected by the installation. The glass of the original license plate light must be completely covered with the film supplied.Advantages of the side license plate holderThe lateral positioning creates a significantly reduced and tidy look at the rear, ideal for bobber, chopper or cafe racer conversions. At the same time, full legal compliance is maintained, as the license plate angle, mounting and illumination comply with legal requirements. The holder can also be easily combined with other accessories and offers a high degree of flexibility when customizing.

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3for Honda VTX 1300 / SC46 Honda VTX 1800 / SC52 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.