Product information "Side license plate holder for Honda VT 600 Shadow TÜV"
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificate
Discover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.
The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.
Suitable for:
Honda VT 600 Shadow type PC21
Product details:
Brand: Burchard Excellence
Country of origin: Germany - Made in Germany
Material: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steel
License plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mm
Lighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illumination
Mounting: Pre-assembled. All screws required for mounting are included in the scope of delivery
Scope of delivery:
Side license plate holder completely pre-assembled
LED license plate light
TÜV parts certificate
Fastening material
Additional information:
The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.
Important vehicle-specific information and requirements:
Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.
The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.
The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.
Original lighting equipment remains unaffected.
The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.
| Motorcycle manufacturer: | Kawasaki |
|---|---|
| Motorcycle trade name: | VT 600 Shadow |
| Motorcycle type: | PC21 |
Side license plate holder for Honda VT 600 Shadow TÜV
€299.00*
Few pieces available, delivery time 4-5 days
- Worldwide shipping
- Same day shipping for orders placed before 10:00 a.m. (subject to availability)
- Direct from manufacturer
- Convenient purchase on account
- Guest order possible without customer account
Reflector with holder for side license plate holder from Motorrad BurchardThe reflector with holder is mounted on the license plate.Included in the scope of delivery:1 piece
Customers also bought
Some details decide whether a conversion simply looks good or really works perfectly. The M6 variable mounting adapter in black is made precisely for these subtle but crucial mounting situations. Instead of elaborate custom-made products, it offers a clean, well thought-out solution for modern, minimalist motorcycle conversions - functional, flexible and visually unobtrusive.Made from high-quality material and finished in a discreet black, the adapter blends almost invisibly into the overall appearance of your motorcycle. The two-part system consisting of a shaft nut and sliding clamping piece offers maximum freedom: lights can be precisely aligned, rotated and then securely fixed. This precision really comes into its own with extremely compact indicators.Whether underneath the fittings, on the lever axle of the clutch or brake or in combination with a handlebar mirror - this adapter makes creative and technically clean solutions possible. It is the ideal basis for anyone who values clear lines, perfect alignment and durable mounting.Technical featuresM6 stem nut with internal threadTwo-part: shaft nut & sliding clamping pieceHolder for lights with M5 threadCan be rotated and moved, can be locked with grub screwsBlack, inconspicuous surfaceBenefits & advantagesHigh flexibility when mounting luminairesClean look without custom-made productsPrecise alignment in the direction of travelIdeal for compact LED lightsMountingThe original nut on the brake or clutch lever axle is replaced by the M6 shank nut. Then align the light, fix the clamping piece - done.Rely on maximum freedom when converting and a mounting that impresses both technically and visually - with the variable M6 mounting adapter from Kellermann.
Electrical systems are often invisible on motorcycles - but they decide whether conversions really work properly. The Kellermann R2 indicator relay is made precisely for this task: a compact, precise problem solver for LED and halogen indicators that combines modern technology with absolute reliability. Especially for custom bikes, choppers and cruisers, it keeps the wiring harness tidy and the flashing rhythm calm.Visually, the R2 is functional and of high quality: a robust, black metal housing and matching mounting accessories underline the professional standard. Technically, the relay works independently of the load so that the flashing frequency remains constant - regardless of whether LED or classic halogen indicators are installed.Technical features:ECE-approvedReplaces original 2- or 3-pole flasher relaysLoad-independent, smooth flashing sequenceSwitching capacity: 0.5-85 wattsDimensions: 34 × 22 × 12 mm (L × W × H)For 12-volt DC vehicle electrical systemsHigh-quality metal housingA particular advantage: The R2 reliably prevents the unintentional flashing of the non-activated indicators - a common problem with LED conversions. Installation is straightforward and can be completed quickly with the accessories supplied. In some cases, it may be necessary to deactivate the hazard warning lights.Rely on a clean electrical solution with high quality standards - the Kellermann indicator relay R2 brings control, safety and professionalism to your blinker system.
Minimalism meets maximum effect: the Kellermann Atto® DF is a real statement for modern motorcycle rear ends. The blinker is extremely compact, with a matt black metal housing and clear glass look - technical, precise and uncompromisingly high-quality. With its almost disappearing size, the Atto® DF fits perfectly into purist chopper and cruiser conversions and allows the design of your motorcycle to make a grand entrance.The Atto® DF combines blinker, tail light and brake light in a single, globally approved 3in1 housing. Despite a light surface that fits four times the size of a 1-cent coin, it delivers impressive luminosity. This is made possible by the combination of Kellermann HighPower LED technology and EXtranz® Extreme Optical Transparency Technology, which directs the light precisely and emits it outwards extremely efficiently.Technical highlights:3in1 function: blinker, rear and brake lightECE-approved for rearHigh-quality metal housing in blackClear glass cover, modern and unobtrusiveM5 x 0.5 x 6.5 mm mounting threadDimensions: length 14 mm, Ø max. 10 mm, glass Ø 7.8 mmFor 12 volt DC wiring systemsThe Atto® DF replaces the original rear and brake light as well as the indicators and thus ensures a tidy, modern rear look. It can be fitted universally and all the electronics are securely integrated in the housing. Depending on the vehicle, electronic accessories may be required to adjust the flashing frequency.Rely on uncompromising technology, iconic design and maximum visibility - with the Kellermann Atto® DF you can turn your motorcycle rear into a real eye-catcher. Discover now and redefine how minimal motorcycle lighting can be.
Reflector with holder for side license plate holder from Motorrad BurchardThe reflector with holder is mounted on the license plate.Included in the scope of delivery:1 piece
Customers also viewed
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificateDiscover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.Suitable for:Honda VT 600 Shadow type PC21Product details:Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyMaterial: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steelLicense plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mmLighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illuminationMounting: Pre-assembled. All screws required for mounting are included in the scope of deliveryScope of delivery:Side license plate holder completely pre-assembledLED license plate lightTÜV parts certificateFastening materialAdditional information:The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.Important vehicle-specific information and requirements:Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.Original lighting equipment remains unaffected.The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.
Handlebar "Cube" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 680mm height: 295mm Depth: mm Clamp width: 89 mmHandlebar width lower edge: approx. 210mm Material: steel Surface: High-gloss chrome-plated 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Harley Davidson FXDL, FXDWG - FXDHarley Davidson FXDLI, FXDWG - FD1Harley Davidson FXD35, FXDLI, FXDWGI - FD2Harley Davidson FLSTCI, FLSTIFI, FLSTI, FLSTIN, FXST, FXSTB, FXSTC, SXSTD, FLSTC - FS2Harley Davidson FLST, FXST, FXSTB, FXSTC - FXSTFor vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.