Product information "Side license plate holder for Honda VT 600 Shadow TÜV"
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificate
Discover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.
The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.
Suitable for:
Honda VT 600 Shadow type PC21
Product details:
Brand: Burchard Excellence
Country of origin: Germany - Made in Germany
Material: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steel
License plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mm
Lighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illumination
Mounting: Pre-assembled. All screws required for mounting are included in the scope of delivery
Scope of delivery:
Side license plate holder completely pre-assembled
LED license plate light
TÜV parts certificate
Fastening material
Additional information:
The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.
Important vehicle-specific information and requirements:
Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.
The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.
The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.
Original lighting equipment remains unaffected.
The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.
| Motorcycle manufacturer: | Honda |
|---|---|
| Motorcycle trade name: | VT 600 Shadow |
| Motorcycle type: | PC21 |
Side license plate holder for Honda VT 600 Shadow TÜV
€299.00*
Production time approx days. Production starts after receipt of order
Assembly in our own workshop
Lemgo, Germany · by appointment
- Professional fitting directly at the manufacturer
- On request including TÜV inspection and registration (where possible)
- Can be combined with further conversions
Non-binding · product is pre-filled
- Worldwide shipping
- Fast processing and prompt shipping
- Direct from manufacturer
- Convenient purchase on account
- Guest order possible without customer account
Reflector with holder for side license plate holder from Motorrad BurchardThe reflector with holder is mounted on the license plate.Included in the scope of delivery:1 piece
Customers also viewed
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificateDiscover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.Suitable for:Honda VT 600 Shadow type PC21Product details:Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyMaterial: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steelLicense plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mmLighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illuminationMounting: Pre-assembled. All screws required for mounting are included in the scope of deliveryScope of delivery:Side license plate holder completely pre-assembledLED license plate lightTÜV parts certificateFastening materialAdditional information:The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.Important vehicle-specific information and requirements:Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.Original lighting equipment remains unaffected.The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.
Handlebars "Wishbone" - "1" (25.4 mm) with TÜV Parts Certificate §19/3 Handlebar diameter 32mm. In the area of the clamps "1" (25.4 mm). Width: 800 mm Height: 200 mm Depth: 90 mm Clamping width: 115 mm Material: Steel Surface: Glossy chrome-plated with TÜV Parts Certificate §19/3 Honda VT600 Shadow / PC21 For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic.
Riser "Spartican" (1 pair) for 32mm 1 1/4" Height: 65 mm With reducing sleeves for use on triple clamps of 10, 12mm bushingsBlack The risers are supplied with a TÜV Test Report § 19/3 for: Honda VT 750 Black Widow / RC48 Honda VT 750 Shadow / RC50 Kawasaki VN 900 Classic / VN900B Yamaha XVS 650 Drag Star / VM03, VM04 Yamaha XVS 950 A Midnight Star / VN02 Yamaha XVS 1100 Drag Star Classic / VP05, VP16 Suzuki VL 800 Volusia / WVBM Suzuki M 800 Intruder / WVB4 Harley Davidson / XL2 Harley Davidson / FD2 Harley Davidson / FS2 For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic. Included in the delivery: 1 x Risers (1 pair) 2x screw M10x1.25x752x reducing sleeve from 12 to 102x reducing sleeve 14 to 102x washer2x spring rings2x fender washers
Reflector with holder for side license plate holder from Motorrad BurchardThe reflector with holder is mounted on the license plate.Included in the scope of delivery:1 piece