Product information "Side license plate holder for Honda VT 600 Shadow TÜV"
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificate
Discover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.
The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.
Suitable for:
Honda VT 600 Shadow type PC21
Product details:
Brand: Burchard Excellence
Country of origin: Germany - Made in Germany
Material: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steel
License plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mm
Lighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illumination
Mounting: Pre-assembled. All screws required for mounting are included in the scope of delivery
Scope of delivery:
Side license plate holder completely pre-assembled
LED license plate light
TÜV parts certificate
Fastening material
Additional information:
The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.
Important vehicle-specific information and requirements:
Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.
The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.
The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.
Original lighting equipment remains unaffected.
The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.
| Motorcycle manufacturer: | Honda |
|---|---|
| Motorcycle trade name: | VT 600 Shadow |
| Motorcycle type: | PC21 |
Side license plate holder for Honda VT 600 Shadow TÜV
€299.00*
Production time approx 30 days. Production starts after receipt of order
Assembly in our own workshop
Lemgo, Germany · by appointment
- Professional fitting directly at the manufacturer
- On request including TÜV inspection and registration (where possible)
- Can be combined with further conversions
Non-binding · product is pre-filled
- Worldwide shipping
- Fast processing and prompt shipping
- Direct from manufacturer
- Convenient purchase on account
- Guest order possible without customer account
Reflector with holder for side license plate holder from Motorrad BurchardThe reflector with holder is mounted on the license plate.Included in the scope of delivery:1 piece
Customers also bought
Side Covers 1 Set left and right Material: Steel chrome for Honda VT 600 Shadow / PC21 Plug and Play! The Side covers fit on the original frame point and you can change it easy. Very robust and high quality made of steel with a chrome finish.
Narrow Ape 30" handlebars - "1" (25.4 mm) with TÜV parts certificate §19/3 Width: 700 mm Height: 280 mm Depth: 210 mm Clamp width: 130 mmHandlebar width lower edge: approx. 220 mm Material: steel Finish: black matt3 holes 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C - XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG - FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I - FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI - FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC - FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC - FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS - FL1 Harley Davidson FLHR - FLHR For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
The HIGHSIDER smart SUPERBIKE handlebar end mirror impresses with its clear design, high-quality workmanship and particularly flexible adjustability.The black, round mirror is equipped with convex glass, which offers an extended field of vision and thus ensures greater safety on the road. The short, straight stem blends discreetly into the overall look, while the adjustable joint enables precise adjustment to your sitting position.Thanks to the E-approval, the mirror is approved for use in road traffic and does not require any additional registration.Installation is straightforward on existing handlebar weights (M6). Please note that an approx. 10 mm longer screw is required for mounting.With its sporty, simple design, the HIGHSIDER smart SUPERBIKE is ideal for naked bikes, sports bikes and café racers, but also enhances the look of choppers and cruisers.Technical data:Lens diameter: 94 mmHead diameter: 99.5 mmStem length: 65 mm (to the center of the mounting hole)Height with stem: 140 mmThrough hole: for M6Color: blackE-approved (no TÜV registration required)Scope of delivery:1 pair of HIGHSIDER smart SUPERBIKE handlebar end mirrors👉 With the HIGHSIDER smart SUPERBIKE handlebar end mirror, you get a perfect combination of functionality, safety and modern design - for a sporty finish on your motorcycle.
Customers also viewed
Side license plate holder Burchard Excellence for Honda VT 600 Shadow PC21 - with TÜV parts certificateDiscover the highest quality workmanship and perfect fit with the side license plate holder from Burchard Excellence. Manufactured in Germany and equipped with a TÜV parts certificate in accordance with §19 Paragraph 3 StVZO, this license plate holder stands for tested safety and stylish design.The parts certificate confirms compliance with all applicable legal requirements. Installation must be carried out in accordance with the instructions and the requirements listed in the certificate in order to maintain the vehicle's operating license.Suitable for:Honda VT 600 Shadow type PC21Product details:Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyMaterial: Choice of high-gloss chrome-plated steel or nickel-plated, glossy black or matt black powder-coated steelLicense plate size: Suitable for almost all international license plate formats - e.g. Germany 180x200mm to 220x200mm, Austria 210x170mm, Switzerland 180x140mm, Denmark 230x170mm, France 170x130mm, Netherlands 210x145mm, Italy 175x175mmLighting: Including LED license plate lighting with 3 SMD diodes, E-approved for optimum illuminationMounting: Pre-assembled. All screws required for mounting are included in the scope of deliveryScope of delivery:Side license plate holder completely pre-assembledLED license plate lightTÜV parts certificateFastening materialAdditional information:The bracket is attached to the vehicle's original wheel axle. This requires a centered M10x1.25x25mm thread. This service is offered free of charge with purchase.Important vehicle-specific information and requirements:Fitting must be carried out professionally in accordance with the fitting instructions or manufacturer's specifications.The MB20 license plate holder is suitable for official motorcycle license plates in accordance with Annex 4 of the FZV. However, the choice of version does not affect the allocation of a specific license plate type.The license plate must not exceed the vehicle width defined by the handlebars. If a different handlebar is used, individual approval by an officially recognized expert may be required.Original lighting equipment remains unaffected.The glass of the standard license plate light must be completely covered with the enclosed film. The film must be cut to size.
Side Covers 1 Set left and right Material: Steel chrome for Honda VT 600 Shadow / PC21 Plug and Play! The Side covers fit on the original frame point and you can change it easy. Very robust and high quality made of steel with a chrome finish.
Handlebar "Tracker" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 760mm height: 80mm Depth: 90 mm Clamp width: 89 mmHandlebar width lower edge: approx. 170mm Material: steel Finish: black matt3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Harley Davidson FXDL, FXDWG - FXDHarley Davidson FXDLI, FXDWG - FD1Harley Davidson FXD35, FXDLI, FXDWGI - FD2Harley Davidson FLSTCI, FLSTIFI, FLSTI, FLSTIN, FXST, FXSTB, FXSTC, SXSTD, FLSTC - FS2Harley Davidson FLST, FXST, FXSTB, FXSTC - FXSTFor vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
Handlebar "Bad Ape" - "1" (25.4 mm) with TÜV parts certificate §19/3"Fat Look" 32mm width: 800 mm Height: 220 mm Depth: 150 mm Clamp width: 140 mmHandlebar width lower edge: approx. 350 mmMaterial: steel Finish: black matt3 holes 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Classic / VN900BSuzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXSTFor vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.
"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 17 cm forward-mounted footrest system for Harley Davidson Softail Fatboy / FS2 12 cm forward-mounted footrest system for Harley Davidson Softail Breakout / FS2 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.