Contrapesos de manillar HIGHSIDER AKRON-LS con soporte de espejo terminal de manillar, para todos los espejos terminales de manillar HIGHSIDER y SHIN YO con abrazadera exterior de manillar, negro con tapa en varios colores, par.
¡Sólo 5 en stock!
39,95 €*
Disponible inmediatamente, plazo de entrega 1-3 días
Número de producto:
PW161-0595
Fabricante:
HIGHSIDER
Zusatzfeld 1:
33,57
Nuestras ventajas
- Envío a todo el mundo
- Envío en el mismo día para pedidos realizados antes de las 10.00 h (sujeto a disponibilidad)
- Directo del fabricante
- Compra cómoda a cuenta
- Posibilidad de pedido de invitados sin cuenta de cliente
Información sobre el producto "Contrapesos de manillar HIGHSIDER AKRON-LS con soporte de espejo terminal de manillar, para todos los espejos terminales de manillar HIGHSIDER y SHIN YO con abrazadera exterior de manillar, negro con tapa en varios colores, par."
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors
- Styling for your bike -
With these elegantly designed handlebar ends with handlebar end mirror mount, you can customize your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.
Our accessory TIP:
Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring.
Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.
Dimensions:
Handlebar weight Ø: 37.4 mm
Width: 29 mm
Mount for mirror: Ø 29.90 mm, width: 12 mm
Scope of delivery: 1 pair incl.
2 clamping sleeves each with D. 12 mm and D. 16 mm
2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm
2 x M6 central screws
2 x M6 conical nuts
NOTE:
For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.
Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
- Styling for your bike -
With these elegantly designed handlebar ends with handlebar end mirror mount, you can customize your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.
Our accessory TIP:
Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring.
Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.
Dimensions:
Handlebar weight Ø: 37.4 mm
Width: 29 mm
Mount for mirror: Ø 29.90 mm, width: 12 mm
Scope of delivery: 1 pair incl.
2 clamping sleeves each with D. 12 mm and D. 16 mm
2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm
2 x M6 central screws
2 x M6 conical nuts
NOTE:
For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.
Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
Eigenschaften "Contrapesos de manillar HIGHSIDER AKRON-LS con soporte de espejo terminal de manillar, para todos los espejos terminales de manillar HIGHSIDER y SHIN YO con abrazadera exterior de manillar, negro con tapa en varios colores, par."
| Fabricante de motocicletas: | KTM |
|---|---|
| Nombre comercial de la moto: | 890 Duke - 85 KW, 890 Duke - 89 KW, 890 Duke L (A2) - 35 KW, 890 Duke L - 70 KW, 890 Duke R - 89 KW |
Iniciar sesión