Extremos de manillar Highsider

HIGHSIDER color ring for handlebar weights- Styling for your bike -The colour ring, made of the finest anodized aluminium, allows you to customize your bike in detail if you are already using a HIGHSIDER handlebar weight.You can use the color ring instead of a handlebar end mirror and thus upgrade your bike.It is simply slid over the handlebar end and secured with the grub screw on the ring.If you want to switch back to the HIGHSIDER handlebar end mirrors, you can do so in just a few simple steps.Scope of delivery: 1 pair

HIGHSIDER ENTERPRISE-EP1 handlebar weightsUniversal fit for all handlebars with an inner diameter of 12 to 22 mm - therefore for most 7/8 inch and 1 inch aluminum or steel handlebars. The perfect mount for all HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamping. The handlebar weights can of course also be used without a handlebar end mirror and can be adapted to the look of your bike, for example with one of the optionally available color rings. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. DimensionsHandlebar weightDiameter: 34.5 mm Width: 14.5 mmMount for mirrorDiameter: 29.8 mmWidth: 12 mmScope of delivery:2 x handlebar weights2 clamping sleeves each with 12 and 16 mm Ø2 spacer sleeves each with 14, 18 and 21 mm Ø2 x M6 central bolt2 x M6 cone nutCan be ordered optionally:Color ring for handlebar weights (see accessories)Note:Please check the dimensions for accuracy of fit before purchasing

HIGHSIDER WAVE handlebar weightsUniversal fit for handlebars with an inner diameter of 12 to 22 mm - therefore for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Handlebar weight: Ø 34.5 mm Width: 18 mmMount for mirror: Ø = 29.80 mmMount for mirror: width = 12 mm Please check the dimensions for accuracy of fit before purchasing!Scope of delivery: 1 pair, contains:2 x handlebar weights each2 x clamping sleeve Ø 12 and 16 mm each2 spacer sleeves each with Ø 14, 18 and 21 mm2 x M6 central bolt2 x M6 cone nutNote:The handlebar weight can also be used without a handlebar end mirror and can be adapted to the look of your bike using one of the 4 different color rings.

Contrapesos de manillar HIGHSIDER para espejos de 1 pulgada para YamahaContrapesos de manillar de aluminio anodizado negro para varios manillares originales Yamaha. Todos nuestros espejos de manillar (espejos colgantes) con un diámetro de 1 pulgada (25,4 mm) se pueden montar en estos contrapesos de manillar. Se adapta por ejemplo a XJ 600 Diversion, modelos antiguos, FJR 1300A, FZ1, FZ8, YZF-R125, YZF R6, YZF R1.La amplia gama de accesorios HIGHSIDER se adapta perfectamente a su moto. Con el más alto nivel de calidad y funcionalidad, puedes personalizar fácilmente tu moto según tus deseos. ¡Por favor, compruebe las dimensiones para la exactitud de ajuste antes de comprar!DimensionesAnchura total: 34 mmAnchura fuera del manillar: 28 mmLongitud del tornillo: 46 mm, M6 x 1,5 mm Diámetro: 25,4 mmSi las dimensiones de este artículo no coinciden con los extremos de manillar desmontados, eche un vistazo al artículo 161-046.Volumen de suministro: 1 par

Contrapesos de manillar HIGHSIDER para espejos de 1 pulgada para YamahaContrapesos de manillar de aluminio anodizado negro para varios manillares originales Yamaha. Todos nuestros espejos de manillar (espejos colgantes) con un diámetro de 1 pulgada (25,4 mm) se pueden montar en estos contrapesos de manillar. Se adapta por ejemplo a XJ 6 Diversion, 2010, FZ 6 S2 ABS, 2010, TDM 850 / 900.También apto para MT-09, MT-09 Tracer, ¡pero sólo sin montar los protectores de manos!La amplia gama de accesorios HIGHSIDER se adapta perfectamente a su moto. Con el más alto nivel de calidad y funcionalidad, puede personalizar fácilmente su moto según sus deseos. Por favor, compruebe las dimensiones antes de comprar.DimensionesAnchura total: 43 mmAnchura fuera del manillar: 28 mmRosca del peso del manillar: 19 mm, M16 x 1,5 mm (el tornillo cromado no se puede aflojar)Diámetro: 25,4 mmSi las dimensiones de este artículo no coinciden con los extremos de manillar desmontados, eche un vistazo al artículo 161-047.Volumen de suministro: 1 par

Contrapesos de manillar HIGHSIDER para espejos de 1 pulgada para SuzukiContrapesos de manillar de aluminio anodizado negro para varios manillares originales de Suzuki. Todos nuestros espejos de manillar (espejos colgantes) con un diámetro de 1 pulgada (25,4 mm) se pueden montar en estos contrapesos de manillar.La amplia gama de accesorios HIGHSIDER está perfectamente adaptada a su motocicleta. Con el más alto nivel de calidad y funcionalidad, puede personalizar fácilmente su moto según sus deseos. ¡Por favor, compruebe las dimensiones para la exactitud de ajuste antes de comprar!DimensionesAnchura: 28 mmLongitud del tornillo: 41 mm, M6Diámetro: 25,4 mmPeso: aprox. 35 gVolumen de suministro: 1 par

Contrapesos de manillar HIGHSIDER para espejos de 1 pulgada para KawasakiContrapesos de manillar de aluminio anodizado negro para varios manillares originales Kawasaki. Todos nuestros espejos de manillar (espejos colgantes) con un diámetro de 1 pulgada (25,4 mm) se pueden montar en estos contrapesos de manillar.La amplia gama de accesorios HIGHSIDER está perfectamente adaptada a su motocicleta. Con el más alto nivel de calidad y funcionalidad, puede personalizar fácilmente su moto según sus deseos. ¡Por favor, compruebe las dimensiones para la exactitud de ajuste antes de comprar!DimensionesAnchura total: 38 mmAnchura fuera del manillar: 28 mmLongitud del tornillo: 53 mm, M8 Diámetro: 25,4 mmVolumen de suministro: 1 par

Contrapesos de manillar HIGHSIDER para espejos de 1 pulgada para HondaContrapesos de manillar de aluminio anodizado negro para varios manillares originales Honda. Todos nuestros espejos de manillar (espejos colgantes) con un diámetro de 1 pulgada (25,4 mm) se pueden montar en estos contrapesos de manillar.La amplia gama de accesorios HIGHSIDER está perfectamente adaptada a su motocicleta. Con el más alto nivel de calidad y funcionalidad, puede personalizar fácilmente su moto según sus deseos. ¡Por favor, compruebe las dimensiones para la exactitud de ajuste antes de comprar!DimensionesAnchura total: aprox. 41 mmAnchura fuera del manillar: 28 mmLongitud del tornillo: 56 mm, M6 Diámetro: 25,4 mmPeso: Par aprox. 140gVolumen de suministro: 1 par

Contrapesos de manillar HIGHSIDER DOT, negroContrapesos de manillar de aluminio negro con tornillo central negro. Ajuste universal para manillares con un diámetro interior de 12 a 22 mm, es decir, para la mayoría de manillares de aluminio o acero de 7/8 pulgadas y 1 pulgada. Todos los retrovisores colgantes HIGHSIDER y SHIN YO con abrazaderas externas pueden fijarse a los contrapesos del manillar.A la medida de su moto: la amplia gama de accesorios HIGHSIDER se adapta perfectamente a su moto. Con el más alto nivel de calidad y funcionalidad, puedes personalizar fácilmente tu moto según tus deseos. DimensionesPeso del manillar: Diámetro: 35,5 mmAnchura: 17 mmSoporte para espejo:Diámetro: 29,8 mmAnchura: 12 mmPeso con accesorios: 74 gRosca M6 x 1,25 mm¡Por favor, compruebe las dimensiones para la exactitud de ajuste antes de comprar!Volumen de suministro: 1 par: 2 x contrapesos de manillar cada uno.2 x casquillos de sujeción D. 12 mm y D. 16 mm cada uno.2 x casquillos de centraje cada uno tipo 1, tipo 2, tipo 3.2 x cada tornillo de centraje M6, arandela dentada y tuerca cónica M6.Nota:Juego de montaje de repuesto: 161-034

HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can customize your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER &amp SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory TIP: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mount for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central screws 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.

HIGHSIDER AKRON-XL handlebar weights - Styling for your bike -With these elegantly designed handlebar ends, you can customize your bike in detail according to your ideas. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.Our accessory TIP:Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher.Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 34 mm Scope of delivery: 1 pair incl.2 clamping sleeves each with D. 12 mm and D. 16 mm2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central screws2 x M6 conical nutsNOTE:For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.

HIGHSIDER AKRON-XS motorcycle handlebar weights - Styling for your bike - With these elegantly designed handlebar ends, you can customize your bike in detail according to your ideas. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory TIP: Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 17 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central screws 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.

HIGHSIDER CONERO TYPE 2 handlebar weights Available in glossy black with polished chamfers or in matt black - BLACK EDITION -Handlebar weights made from CNC machined aluminum. The HIGHSIDER CONERO TYPE 2 comes with a special adapter (black aluminum ring), which makes it possible to mount our HIGHSIDER handlebar end mirrors with a Ø 30 mm mount. Universal fit for handlebars with an inner diameter of 12 to 22 mm - suitable for most 7/8 inch and 1 inch aluminum or steel handlebars. Our HIGHSIDER CONERO series is characterized by a minimalist design and fits perfectly with uncovered motorcycles. The beautifully shaped and high-quality aluminum add-on parts give your roadster a face and character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was simply allowed to be a motorcycle - reduced to riding, experiencing and experiencing. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions Diameter: approx. 34.5 mmLength: 17 mmMirror mount diameter: 30 mmHandlebar weight with attachment: 132 gColor: glossy black with polished chamfers or matt blackScope of delivery: 1 pair incl. 2 x clamping sleeves D. 12 mm and D. 16 mm each.2 x centering sleeves each type 1, type 2, type 3.2 x each black coated M6 central screw and M6 conical nut.

HIGHSIDER handlebar ends EVO, chrome-plated or black.Chrome-plated or black handlebar ends, suitable for handlebars with an inner diameter of 12 to 22 mm - i.e. for most 7/8 inch and 1 inch aluminum or steel handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be attached to the handlebar weight.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Please check the dimensions for accuracy of fit before purchasing!Dimensions: Diameter: 25.4 mm Length: 28 mmScope of delivery: 1 pair, contains:2 x handlebar weights each2 x clamping sleeves D. 12 mm and D. 16 mm each2 x centering sleeves each type 1, type 2, type 32 x each M6 central bolt, toothed washer and M6 conical nutSpare mounting set: 161-034

HIGHSIDER handlebar weights CURVE, chrome-plated or black.Handlebar weights made of chrome-plated or black aluminum with chrome-plated or black central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - therefore suitable for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. DimensionsHandlebar weight: Diameter: 35.5 mmWidth: 17 mmMount for mirror:Diameter: 29.8 mmWidth: 12 mmWeight with attachments: 74 gThread M6 x 1.25 mmPlease check the dimensions for accuracy of fit before purchasing!Scope of delivery: 1 piece, including mounting set and universal clamping system: 2 x handlebar weights each.2 x clamping sleeves D. 12 mm and D. 16 mm each.2 x centering sleeves each type 1, type 2, type 3.2 x each black-coated M6 central bolt, toothed washer and M6 conical nut.Note:Spare mounting set: Order no. No.: 161-034