Highway Hawk Saddlebag Support Kit Set chrome for Honda VT 600 Shadow

Saddlebag Support Kit chromefor Honda VT 600 Shadow / PC21The saddlebag support kit are attached to the original retaining points on the fender.All parts required for assembly are included.Made of High Quality Chromed SteelExample image. The bracket are delivered in a vehicle-related and may deviate from the picture.

Product number: H661-024

Manufacturer: Highway Hawk

€81.35*

Frame change for Bobber conversion Honda VT 600 Shadow PC21 with TÜV

Frame change for Bobber conversionFor Honda VT 600 Shadow / PC21First, the frame is clamped into a teaching and restiffened. For this purpose, we weld in a crossbar. We then shorten the frame and weld the ends with sheets. At the end, we put up a serial number and carry out the TÜV inspection.We are also happy to carry out further work for you.Please note that you will need to deliver your vehicle.Are you interested in the conversion? We are happy to answer any further questions by e-mail or phone.

Product number: MB11-1080

Manufacturer: Burchard Excellence

€1,490.00*

Highway Hawk Footpegs rider or passenger "Tech Glide" Honda VT 600, Honda VT 750 / Passenger Honda VT 600, Honda VT 750 (1 Set)

Footpegs rider (1 Set) "Tech Glide"for Honda VT 600 Shadow / ab 1999 Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 or Footpegs passenger (1 Set) "Tech Glide" for Honda VT 600 Shadow / ab 1999 Honda VT 750 ACE C2 / RC44 The footrests are replaced with the original driver rests.All mounting materials required for assembly are supplied.The receptacles for the footrests are vehicle-related and may differ from the image (example image for the design).Included in delivery:1 piece

Product number: H731-602

Manufacturer: Highway Hawk

€122.26*

> 500 available

Highway Hawk Mastercylindercover "Tech Glide" Honda VT, Honda VF, Honda VTX, Yamaha XV, Yamaha XVZ

Mastercylindercover "Tech Glide"forHonda VT 600 Shadow / PC21, Honda VF 750 Magna / RC43, Honda VT 750 ACE C2 / RC44, Honda VT 750 Black Widow / RC48, Honda VT 750 Shadow RC50, Honda VT 750 Spirit RC53, Honda VT 750 S / RC58, Honda VT 1100 ACE C2 / SC23, Honda VT 1100 Aero / SC32, Honda VTX 1300 / SC52, Honda VT 1300 CX Fury / SC61, Honda VTX 1800 / SC46, Yamaha XVZ 1300 Royal Star / 4NK, 4YP, Yamaha XV 1600 Wild Star / VP08, Yamaha XV 1700 Roard Warrior For older vehicles we recommend to buy a new original gasket from your dealer. There is no new gasket included. All assembly materials required for assembly are included.Included in delivery:1 piece

Product number: H451-003

Manufacturer: Highway Hawk

€29.06*

Highway Hawk Footpegs rider or passenger "Smooth" Honda VT 600, Honda VT 750 Spirit/Shadow / Passenger Honda VT 600, Honda VT 750 (1 Set)

Footpegs rider "Smooth"for Honda VT 600 Shadow / ab 1999 Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 or Footpegs passenger (1 Set) "Smooth" for Honda VT 600 Shadow / ab 1999 Honda VT 750 ACE C2 / RC44 The footrests are replaced with the original driver rests.All mounting materials required for assembly are supplied.The mounts for the footrests are vehicle-related and may differ from the image (example image for the design). Included in delivery:1 set

Product number: H731-381

Manufacturer: Highway Hawk

€130.55*

Forward Controls Kit traverse version 12 cm forward for Honda VT 600 Shadow TÜV

Footpegs and Levers Design: Ness Style Look smooth levers | Surface: Black Dull

"Made in Germany"Forward Controls Kit with TÜV Test Report § 19/312 cm forward forHonda VT 600 Shadow / PC21The Forward Controls Kit is delivered pre-mounted with all parts required for assembly, for example with an extended brake line (if necessary).The Forward Controls Kit fixed on the original frame points.Our Forward Controls Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Forward Controls Kit are galvanically nickel-plated before powder coating.All Motorrad Burchard Forward Control Kits are supplied with a 2-year warranty on processing and chromium plating. Shift- and Brakeleversare fitted by hand and provided with grease nipples.The connecting parts (ball joints) on the shift and brakerods are free of charge and also equipped with grease nipples. This quality standard provides a minimum of play on/off the waves and a maximum of lifetime.The Forward Controls Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. All removable parts are available as spare parts.The Forward Controls Kit is available in 4 different designs.

Product number: MB01-1080NSM

Manufacturer: Burchard Excellence

Variants from €856.99*

€926.99*

Only 8 available

Side Cover 1 Set / VT 600 Shadow / Black Dull

Surface: Black Dull

Side Covers 1 Set left and right Material: Steel chrome for Honda VT 600 Shadow / PC21 Plug and Play! The Side covers fit on the original frame point and you can change it easy. Very robust and high quality made of steel with a chrome finish.

Product number: H511-106B

Manufacturer: Highway Hawk

Variants from €119.95*

€178.36*

Highway Hawk Turn Signals Visors (1 Pair) "Plain" chrome for Honda VT, Honda VF

Turn Signals Visors "Plain"Suitable for: Honda VT 600 Shadow / PC21 till Baujahr 1998 Honda VF 700 / RC21 Honda 750 C Magna / RC43 Honda VT 1100 Shadow / SC23 Honda VT 1100 ACE C2 / SC32A packing unit contains two pieces each. The mounting is done by screws. All accessories required for assembly are included in the scope of delivery.Included in delivery:1 piece

Product number: H661-052

Manufacturer: Highway Hawk

€31.88*

Highway Hawk footrests rider "Air" for Honda models see description'

Replacement footrests for rider design "Airfor Honda VT 125 Shadow 99-06Honda CMX 250 Rebel from 96-VLX/ VT 600CD up to 99VT750DC Black widow 01-03VT750S/RS from 10-VTX 1300CX Fury from 12-VTX1800C/ VTX 1800R/ VTX1800SThe footrests are replaced with the original rider footrests. All mounting materials required for installation are supplied. The mountings for the footrests are vehicle-related and may differ from the picture (example picture for the design). Included in delivery:1 set

Product number: H731-382

Manufacturer: Highway Hawk

€133.53*

Highway Hawk Taillight Grill Covers for Honda VT 600 Shadow - Honda VT 1100 ACE C2 chrome

Taillight Grill Covers chrome for Honda VT 600 Shadow / PC21 Honda VT 1100 ACE C2 / SC32 All assembly materials required for assembly are included. The taillight cover is screwed onto the original taillight.

Product number: H661-110

Manufacturer: Highway Hawk

€18.35*

Only 5 available

Highway Hawk Clutch cable steel braided original length Honda VT 600 Shadow

Steelbreaded Clutch Cable In original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded clutch cable is exchanged for the original clutch cable. The lenght (only covering without core) is about 103 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded clutch cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0203

Manufacturer: Highway Hawk

€58.75*

SMLP / VT 600 C / PC21 / 240x130 / SM

License plate size: 240mm x 130mm France | Surface: Black Dull

"Made in Germany" Side mount license plate holder with TÜV Test Report § 19/3 for Honda VT 600 Shadow / PC21 The side mount license plate holder is supplied pre-assembled with all parts required for assembly. Our side mount license plate holder are made of steel and are available in high-gloss chrome, black glossy powder coated or black matt powder coated. In order to achieve corrosion resistance in powder coating, such as chrome, the side mount license plate holder are galvanically nickel-plated before powder coating. All side mount license plate holder are supplied with a black LED light. The LED light has an e-mark and is also listed in the TÜV Test Report. The side mount license plate holder is supplied with a TÜV Test Report § 19/3, an assembly instruction and a pats list. All removable parts are available as spare parts.

Product number: MB20-1080SM-240-130L

Manufacturer: Burchard Excellence

€299.00*

Highway Hawk Clutch cable steel braided + 40 cm Honda VT 600 Shadow

Steelbreaded Clutch Cable + 40 cm longer to the original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded clutch cable is exchanged for the original clutch cable. The lenght (only covering without core) is about 144 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded clutch cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0209

Manufacturer: Highway Hawk

€64.11*

Only 10 available

Highway Hawk Clutch cable steel braided + 15 cm Honda VT 600 Shadow

Steelbreaded Clutch Cable + 15 cm longer to the original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded clutch cable is exchanged for the original clutch cable. The lenght (only covering without core) is about 118 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded clutch cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0208

Manufacturer: Highway Hawk

€60.88*

Highway Hawk Regulator Cover for Honda VT 600 Shadow chrome (1 pc.)

Regulator coverfor Honda VT 600 Shadow / PC21 All assembly materials required for assembly are included. The picture shows the regulator cover attached to the vehicle.Included in delivery:1 piece

Product number: H691-100

Manufacturer: Highway Hawk

€52.23*

Only 3 available

Soziusfußrasten / Sundance / Honda div. / C

Footpegs and Levers Design: Sundance Look | Surface: Chrome

"Made in Germany"Footpegs passenger (1 Set) forHonda VT 125 Shadow / JC29 - JC31Honda VT 600 Shadow / PC21 till 1998Honda VF 750 Magna / RC43Honda VT 750 Black Widow / RC48Honda VT 750 Shadow / RC50Honda VT 750 Spirit / RC53Honda VT 750 S / RC58Honda VT 1300 CX Fury / SC61Honda VTX 1800 / SC46All accessories required for assembly are included in the scope of delivery.Our Footpegs are made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the footpegs are galvanically nickel-plated before powder coating.If you have any questions about the product, please contact us by phone.

Product number: MB06-1080

Manufacturer: Burchard Excellence

€94.00*

%

Rim Ring 4.50x15" for rear Honda VT 600 Shadow TÜV

Rim Ring 4.50x15 "Aluminum polished for rear with TÜV Test Report §19/3forHonda VT 600 Shadow / PC21For the conversion to a wide rear wheel we offer a 4.50x15" Rim Ring.With the rim ring you can drive a 170mm rear tyre.The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard.The original Spoke Set no longer fits.Additional Information:When using the Tire Wide 170/80 B 15 83H tl ME88 Marathon no changes (rear or swingarm) are required.Included in the delivery:1 x Rim ring 4.50x15 "Aluminium polished with TÜV Test Report §19/3

Product number: MB99-1083

Manufacturer: Burchard Excellence

€316.00* €790.00* (60% saved)

Only 8 available

Highway Hawk Throttle cable steel braided + 40 cm Honda VT 600 Shadow

Steelbreaded Throttle Cable + 40 cm longer to the original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded throttle is exchanged for the original throttle. The lenght (only covering without core) is about 116 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0113

Manufacturer: Highway Hawk

€68.37*

Lowering Kits For Shock Absorbers Honda VT 600 Shadow WITHOUT TÜV

Shock absorber lowering WITHOUT TÜVforHonda VT 600 Shadow / PC21By the conversion the motorcycle is lowered by approx. 4,5 cm (measured above the rear wheel centre)Material Galvanized SteelThe lowering kit is delivered with all parts required for assembly. Attention to the conversion you need a spring tensionerMounting NOTE:1. Squeeze Spring with spring tensioner2. Unscrew the shock absorber head3. Relieve the spring tension and remove the spring4. Push the large ring over shock absorber housing5. Remove the old stop Bush from the piston rod, slide the supplied plastic bushing over the piston rod6. Push the spring and press it together with the spring tensioner7. Screw new Shock absorber head, relieve spring8. Take the Bush from the old shock absorber head and re-press into the new oneYou can also let us done the shock absorber conversion. The original shock absorber must be sent to us for conversion.In addition, please order the service "shock absorber lowering for MB00-1080-MB00-1081-MB00-3050-H472-0065".The shock absorbers are lowered by us.All submitted shock absorber changes are guaranteed to be completed within 24 hours.All removable parts are available as spare parts.

Product number: MB00-1081

Manufacturer: Burchard Excellence

€159.00*

Spoke Set for 4.50x15" rear wheel Honda VT 600 Shadow

Stainless steel Spoke Set for 4.50x15" rear wheelforHonda VT 600 Shadow / PC21The Spoke Set is used for the conversion to a 4.50 x15" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.

Product number: MB98-1084

Manufacturer: Burchard Excellence

€284.95*

Highway Hawk "Knuckle" Lever Set (1 pair) für Honda VT, Honda VF, Honda VTX

"Knuckle" Lever Set (1 pair) chromeforHonda VF 750 Magna / RC43 Honda VT 125 Shadow / JC29 Honda VT 600 Shadow / PC21 Honda VT 750 ACE C2 / RC44 Honda VT 750 Black Widow / RC48 Honda VT 750 Shadow / RC50 u. RC53 Honda VT 750 S / RC58 Honda VT 1100 ACE C2 / SC32 Honda VT 1300 CX, Fury / SC61 Honda VTX 1300 / SC52 The "Knuckle" lever set are exchanged for the original levers. All assembly materials required for assembly are included.

Product number: H451-301

Manufacturer: Highway Hawk

€159.32*

Motorcycle Fender "Short" for Honda VT 600 Shadow steel row

Motorcycle Fender "Short " for Honda VT 600 Shadow / PC21 Material: Steel raw. For Tyre Size 100/90-19" Total Length is 470 mm The fender Comes with all the Accessories required for Assembly.

Product number: MB09-5120-1080

Manufacturer: Burchard Excellence

€209.00*

Only 9 available

Highway Hawk Idle cable steel braided + 40 cm Honda VT 600 Shadow

Steelbreaded Idle Cable + 40 cm longer to the original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded idle cable is exchanged for the original idle cable. The lenght (only covering without core) is about 125 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0115

Manufacturer: Highway Hawk

€64.11*

Only 3 available

Highway Hawk Speedo cable steel braided original length Honda VT 600 Shadow

Steelbreaded Speedo Cable In original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded speedo cable is exchanged for the original speedo cable. The lenght (only covering without core) is about 102 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded speedo cable is included in the delivery.

Product number: H20-0303

Manufacturer: Highway Hawk

€50.19*

Only 2 available

Exhaust system Falcon "Cromo Line - Slash Cut" Honda VT 600 Shadow with EG-BE

Falcon Cromo Line - Slash Cut exhaust system with cat and E-mark (EG-BG)ForHonda VT 600 Shadow / PC21The exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of steel and high-gloss chrome. You get the typical Slash Cut design. The conversion to the Falcon Cromo Line exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 are a sample image of a mounted Cromo Line exhaust system on a Honda VT 600 Shadow. Supplied with:- Falcon Cromo Line exhaust system- Mounting instructions- EG-BG documents

Product number: FALCON65240410

Manufacturer: Falcon

€649.95*

Felge / 3.50x16 / VT 600 Shadow / PC21 / S

Surface: Black Glossy

Rim Ring 3.50x16" for front with TÜV Test Report §19/3forHonda VT 600 Shadow / PC21For the conversion to a wide front wheel we offer a 3.50 x 16" Rim Ring.With the Rim Ring you can optionally drive a 130mm or 150mm front tyre.The Rim Ring is for the original wheel hub. Please note that you need a new Spoke Set from Motorrad Burchard.The original Spoke Set no longer fits.In the example picture you see a 150mm front tyre used.Additional Information:The use of the Tire wide 130/90-16 67H TL Marathon front you need a new fender (see Fenders).The use of the Tire Wide 150/80-16 71H TL Marathon front you need a wider Triple Tree Kit (see Triple Tree Kits) and a new Fender (see Fenders).Included the delivery:1 x Rim Ring 3.50x16" with TÜV Test Report §19/3

Product number: MB99-1081S

Manufacturer: Burchard Excellence

Variants from €779.00*

€820.00*

Motorbike Seat Hard Rider for Honda VT 600 Shadow

Sitzbankbezug: Kunstleder Schwarz | Sitzbankmuster: 00301 Tribal | Steppfaden: Thread Black

"Made in Germany"Motorbike Seat Hard RiderforHonda VT 600 Shadow / PC21The base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 13 "Flames"

Product number: MB04-1080 1-00301 SF51

Manufacturer: Burchard Excellence

Variants from €439.00*

€459.00*

Only 2 available

Forward Control without Pegs

Product number: H491-601B

Manufacturer: Highway Hawk

€317.29*

Highway Hawk Mastercylindercover "Gothic" Honda VT, Honda VF, Honda VTX, Yamaha XV, Yamaha XVZ

Mastercylindercover "Gothic"forHonda VT 600 Shadow / PC21, Honda VF 750 Magna / RC43, Honda VT 750 ACE C2 / RC44, Honda VT 750 Black Widow / RC48, Honda VT 750 Shadow RC50, Honda VT 750 Spirit RC53, Honda VT 750 S / RC58, Honda VT 1100 ACE C2 / SC23, Honda VT 1100 Aero / SC32, Honda VTX 1300 / SC52, Honda VT 1300 CX Fury / SC61, Honda VTX 1800 / SC46, Yamaha XVZ 1300 Royal Star / 4NK, 4YP, Yamaha XV 1600 Wild Star / VP08, Yamaha XV 1700 Roard Warrior For older vehicles we recommend to buy a new original gasket from your dealer. There is no new gasket included. All assembly materials required for assembly are included.Mastercylindercover "Gothic"forHonda VT 600 Shadow / PC21, Honda VF 750 Magna / RC43, Honda VT 750 ACE C2 / RC44, Honda VT 750 Black Widow / RC48, Honda VT 750 Shadow RC50, Honda VT 750 Spirit RC53, Honda VT 750 S / RC58, Honda VT 1100 ACE C2 / SC23, Honda VT 1100 Aero / SC32, Honda VTX 1300 / SC52, Honda VT 1300 CX Fury / SC61, Honda VTX 1800 / SC46, Yamaha XVZ 1300 Royal Star / 4NK, 4YP, Yamaha XV 1600 Wild Star / VP08, Yamaha XV 1700 Roard Warrior For older vehicles we recommend to buy a new original gasket from your dealer. There is no new gasket included. All assembly materials required for assembly are included.Included in delivery:1 piecec

Product number: H451-023

Manufacturer: Highway Hawk

€27.06*

Triple Tree Kit 5° degree rake 290 mm wide Honda VT 600 Shadow TÜV

Surface: Black Dull

"Made in Germany"Triple Tree Kit 5° degree rake 290mm wide with TÜV Test Report §19/3forHonda VT 600 Shadow / PC21All original parts such as fenders, headlights, speedometer units, control units, stand tube panels etc. can be still used.The Triple Tree Kit is supplied with the necessary accessories such as a new axle, distance material for front wheel, brake system, fender, etc.The steering head bearing can be taken from the original Triple Tree Kit.In most cases, the original risers cannot be taken over.All removable parts are available as spare parts.Picture 2 is an example illustration and shows the Triple Tree Kit in mounted in a Honda VT 600 Shadow.In the Triple Tree Kit, 3.50 x16" rims with a maximum tyre width of 130 or 150 mm can be installed.Our Triple Tree Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Triple Tree Kit are galvanically nickel-plated before powder coating.The Triple Tree Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. If you have any questions about the product, please contact us by phone at 05261 / 97710 or mail.

Product number: MB053-1080SM

Manufacturer: Burchard Excellence

Variants from €1,039.00*

€1,149.00*

Only 2 available

VFA Platte / VT 600 C Shadow / PC21 / 12 cm / gefr. / NS / C

Footpegs and Levers Design: Ness Style Look milled levers | Surface: Chrome

"Made in Germany"Forward Controls Kit with TÜV Test Report § 19/312 cm forward forHonda VT 600 Shadow / PC21The Forward Controls Kit is delivered pre-mounted with all parts required for assembly, for example with an extended brake line (if necessary).The Forward Controls Kit fixed on the original frame points.Our Forward Controls Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Forward Controls Kit are galvanically nickel-plated before powder coating.All Motorrad Burchard Forward Control Kits are supplied with a 2-year warranty on processing and chromium plating. Shift- and Brakeleversare fitted by hand and provided with grease nipples.The connecting parts (ball joints) on the shift and brakerods are free of charge and also equipped with grease nipples. This quality standard provides a minimum of play on/off the waves and a maximum of lifetime.The Forward Controls Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. All removable parts are available as spare parts.The Forward Controls Kit is available in 4 different designs.

Product number: MB01-1081GN

Manufacturer: Burchard Excellence

Variants from €888.99*

€918.99*

Only 4 available

Highway Hawk Footpegs passenger (1 Set) "Tech Glide" Honda VT 125 - VT 600 - VF 750 - VT 750 Black Widow - Shadow - Spirit - S - VT 1300 CX Fury - VTX 1800

Footpegs passenger (1 Set) "Tech Glide"for Honda VT 125 Shadow / JC29 - JC31 Honda VT 600 Shadow / PC21 till 1998 Honda VF 750 Magna / RC43 Honda VT 750 Black Widow / RC48Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 Honda VT 750 S / RC58 Honda VT 1300 CX Fury / SC61 Honda VTX 1800 / SC46 All accessories required for assembly are included in the scope of delivery. If you have any questions about the product, please contact us by phone.

Product number: H731-606

Manufacturer: Highway Hawk

€122.26*

Highway Hawk Footpegs Rider "Tech Glide" for Honda models see description'

Replacement footrests for rider design "Tech Glidefor Honda VT 125 Shadow 99-06Honda CMX 250 Rebel from 96-VLX/ VT 600CD up to 99VT750DC Black widow 01-03VT750S/RS from 10-VTX 1300CX Fury from 12-VTX1800C/ VTX 1800R/ VTX1800SThe footrests are replaced with the original rider footrests. All mounting materials required for installation are supplied. The mountings for the footrests are vehicle-related and may differ from the picture (example picture for the design). Included in delivery:1 set

Product number: H731-600

Manufacturer: Highway Hawk

€122.26*

Only 3 available

Highway Hawk Throttle cable steel braided original length Honda VT 600 Shadow

Steelbreaded Throttle Cable In original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded throttle is exchanged for the original throttle. The lenght (only covering without core) is about 79 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0104

Manufacturer: Highway Hawk

€61.94*

Lowering Kits For Shock Absorbers Honda VT 600 Shadow TÜV

Shock absorber lowering with TÜV Test Report §19/3forHonda VT 600 Shadow / PC21By the conversion the motorcycle is lowered by approx. 4,5 cm (measured above the rear wheel centre)Material Galvanized SteelWith TÜV Test Report 19/3 (TÜV Nord) for the Honda VT 600 ShadowThe lowering kit is delivered with all parts required for assembly. Attention to the conversion you need a spring tensionerMounting NOTE:1. Squeeze Spring with spring tensioner2. Unscrew the shock absorber head3. Relieve the spring tension and remove the spring4. Push the large ring over shock absorber housing5. Remove the old stop Bush from the piston rod, slide the supplied plastic bushing over the piston rod6. Push the spring and press it together with the spring tensioner7. Screw new Shock absorber head, relieve spring8. Take the Bush from the old shock absorber head and re-press into the new oneYou can also let us done the shock absorber conversion. The original shock absorber must be sent to us for conversion.In addition, please order the service "shock absorber lowering for MB00-1080-MB00-1081-MB00-3050-H472-0065".The shock absorbers are lowered by us.All submitted shock absorber changes are guaranteed to be completed within 24 hours.All removable parts are available as spare parts.

Product number: MB00-1080

Manufacturer: Burchard Excellence

€229.00*

Highway Hawk Turn Signals Visors (1 Pair) "Plain" chrome for Honda models

Turn Signals Visors "Plain"Suitable for:Honda VT 125 Shadow / JC29 Honda VT 600 Shadow / PC21 ab Baujahr 1999 Honda VT 750 ACE C2 / RC44 Honda VT 750 Black Widow / RC48 Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 Honda VT 750 S / RC58 Honda VT 1100 Sabre / ab Baujahr 2000 Honda VT 1100 ACE C3 / SC39 Honda VTX 1300 / SC52 Honda VT 1300 CX Fury / SC61 Honda VTX 1800 / SC46A packing unit contains two pieces each. The mounting is done by tape. All accessories required for assembly are included in the scope of delivery.

Product number: H661-053

Manufacturer: Highway Hawk

€35.80*

Only 3 available

Highway Hawk Speedo cable steel braided + 15 cm Honda VT 600 Shadow

Steelbreaded Speedo cable + 15 cm longer to the original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded speedo cable is exchanged for the original speedo cable. The lenght (only covering without core) is about 115 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded speedo cable is included in the delivery.

Product number: H20-0309

Manufacturer: Highway Hawk

€53.40*

Only 2 available

Highway Hawk Throttle cable steel braided + 15 cm Honda VT 600 Shadow

Steelbreaded Throttle Cable + 15 cm longer to the original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded throttle is exchanged for the original throttle. The lenght (only covering without core) is about 91 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0112

Manufacturer: Highway Hawk

€66.24*

Highway Hawk Footpegs passenger (1 Set) "Air" Honda VT 125 - VT 600 - VF 750 - VT 750 Black Widow - Shadow - Spirit - S - VT 1300 CX Fury - VTX 1800

Footpegs passenger (1 Set) "Air"for Honda VT 125 Shadow / JC29 - JC31 Honda VT 600 Shadow / PC21 till 1998 Honda VF 750 Magna / RC43 Honda VT 750 Black Widow / RC48 Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 Honda VT 750 S / RC58 Honda VT 1300 CX Fury / SC61 Honda VTX 1800 / SC46 All accessories required for assembly are included in the scope of delivery. If you have any questions about the product, please contact us by phone.

Product number: H731-385

Manufacturer: Highway Hawk

€119.64*

Highway Hawk Footpegs rider or passenger "Air" Honda VT 600, Honda VT 750 Spirit/Shadow / Passenger Honda VT 600, Honda VT 750 (1 Set)

Footpegs rider "Air"for Honda VT 600 Shadow / ab 1999 Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 or Footpegs passenger (1 Set) "Air" for Honda VT 600 Shadow / ab 1999 Honda VT 750 ACE C2 / RC44 All accessories required for assembly are included in the scope of delivery. The footrests are replaced with the original pillion footrests.All mounting materials required for assembly are supplied.The receptacles for the footrests are vehicle-related and may differ from the image (example image for the design).Included in delivery:1 set

Product number: H731-380

Manufacturer: Highway Hawk

€117.04*

Only 1 available

Highway Hawk Idle cable steel braided original length Honda VT 600 Shadow

Highway Hawk Steelbreaded Idle Cable In original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded idle cable is exchanged for the original idle cable. The lenght (only covering without core) is about 88 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded idle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0105

Manufacturer: Highway Hawk

€56.61*

Highway Hawk footrests rider "smooth" for Honda models see description

Replacement footrests for rider design "smoothfor Honda VT 125 Shadow 99-06Honda CMX 250 Rebel from 96-VLX/ VT 600CD up to 99VT750DC Black widow 01-03VT750S/RS from 10-VTX 1300CX Fury from 12-VTX1800C/ VTX 1800R/ VTX1800SThe footrests are replaced with the original rider footrests. All mounting materials required for installation are supplied. The mountings for the footrests are vehicle-related and may differ from the picture (example picture for the design). Included in delivery:1 set

Product number: H731-390

Manufacturer: Highway Hawk

€113.81*

Only 6 available

Highway Hawk Idle cable steel braided + 15 cm Honda VT 600 Shadow

Steelbreaded Idle Cable + 15 cm longer to the original length (1 Piece) for Honda VT 600 Shadow / PC21 The steelbreaded idle cable is exchanged for the original idle cable. The lenght (only covering without core) is about 100 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0114

Manufacturer: Highway Hawk

€58.75*

Highway Hawk Radiator Cover chrome for Honda VT 600 Shadow / PC21

Radiator Cover chromefor Honda VT 600 Shadow / PC21 All assembly materials required for assembly are included.

Product number: H711-6101

Manufacturer: Highway Hawk

€105.29*

Only 2 available

Spoke Set for 3.50x16" front wheel Honda VT 600 Shadow

Stainless steel Spoke Set for 3.50x16" front wheelforHonda VT 600 Shadow / PC21The Spoke Set is used for the conversion to a 3.50 x16" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.

Product number: MB98-1082

Manufacturer: Burchard Excellence

€218.26*

> 500 available

Highway Hawk "Wide Blade" Lever Set (1 pair) Honda VT, Honda VF, Honda VTX

"Wide Blade" Lever Set (1 pair) chromeforHonda VF 750 Magna / RC43 Honda VT 125 Shadow / JC29 Honda VT 600 Shadow / PC21 Honda VT 750 ACE C2 / RC44 Honda VT 750 Black Widow / RC48 Honda VT 750 Shadow / RC50 u. RC53 Honda VT 750 S / RC58 Honda VT 1100 ACE C2 / SC32 Honda VT 1300 CX, Fury / SC61 Honda VTX 1300 / SC52 The "Wide Blade" lever set are exchanged for the original levers. All assembly materials required for assembly are included.

Product number: H451-106

Manufacturer: Highway Hawk

€51.80*

Working package lowering kit installation for MB00-1080 - MB00-1081 - MB00-3050 - MB00-3051

Working package lowering kit installationfor MB00-1080MB00-1081 MB00-3050MB00-3051

Product number: SON 005

Manufacturer: Burchard Excellence

€39.00*