Attachments
High-quality side license plate holder for your Triumph Rocket IIIThe side license plate holder from Burchard Excellence was specially developed for the Triumph Rocket III and ensures a much tidier rear view. The design combines high-quality materials, precise workmanship and a legally compliant design. It goes without saying that it is manufactured in Germany and meets the highest quality standards.Thanks to the integrated part type approval from the Federal Motor Transport Authority, you receive a technically tested and legally compliant solution for the conversion of your motorcycle.Burchard Excellence - Made in GermanyThe side license plate holder comes from the Burchard Excellence product line and is manufactured entirely in Germany. The use of high-quality materials and modern production technologies results in a durable product with a high fitting accuracy.With TTG from the Federal Motor Transport AuthorityWith TTG (part type approval). A part type approval is a national approval from the Federal Motor Transport Authority (KBA) for vehicle parts. It confirms that the part meets the legal requirements and may be used on the motorcycle models listed in the approval. Please observe the vehicle list and the respective conditions of the approval.The TTG supplied means that no additional registration is required.Suitable for the following vehiclesManufacturer: TriumphCommercial designation: Rocket III GT and Rocket III StormType: Y101Typgenehmigung:e9168/201311453*Please check that your vehicle data matches before ordering.Material and surfacesThe license plate holder is made of high-quality steel and is available in various finishes:High-gloss chrome-platedNickel-plated and glossy black powder-coatedNickel-plated and matt black powder-coatedThe desired finish can be easily selected via the variant selection.Available license plate sizesThe license plate holder is available for numerous European license plate sizes.Examples:Germany: 180 x 200 mm to 220 x 200 mmAustria: 210 x 170 mmSwitzerland: 180 x 140 mmDenmark: 230 x 170 mmFrance: 170 x 130 mmNetherlands: 210 x 145 mmItaly: 175 x 175 mmOther license plate sizes are available. The selection is made via the variant selection in the store.LED license plate lighting includedThe side license plate holder is supplied with high-quality LED license plate lighting.Technical features:3 SMD diodesE-approved according to StVZOOptimum illumination of the license plateCompact and inconspicuous designScope of deliveryYou will receive a completely pre-assembled side license plate holder included:LED license plate lightTTG from the Federal Motor Transport AuthorityCable set for extending the power cableScrew materialBlinker holderReflectorFitting instructionsPreparation and removal of the original license plate holderFirst remove the cable cover on the swing arm to gain access to the electrical cables.Then disconnect the electrical cables directly at the original license plate holder.Now completely remove the original license plate holder from the vehicle.Then carefully pull the blinker cables back towards the vehicle.Important note:The cables for the license plate illumination remain on the side license plate holder. Therefore, only the blinker cables need to be routed back.Fitting the side license plate holderFit the pre-assembled side license plate holder to the original mounting points on the swingarm.Use the vehicle's original fastening screws for this.Also use the spring washers and washers supplied.Fitting the blinker holderFit the supplied blinker holder to the original fixing points under the mudguard.Use the screws and spacer bushes supplied for this.Then fit indicators of your choice with a valid E number.Connecting the indicatorsConnect the indicators to the vehicle cables that were previously laid back.Ensure that all electrical connections are properly insulated and protected.Fitting the cover plateOnce the indicators have been fitted and connected, attach the cover plate of the blinker holder.Use the screws supplied for this.Then glue the supplied reflector to the center of the cover plate.Advantages of the side license plate holderTidy vehicle appearanceMoving the license plate to the side of the vehicle ensures a much slimmer and tidier rear view. This creates an individual look, especially for bobber, chopper and cafe racer conversions.Individual design optionsThe license plate holder can be optimally combined with other accessories. These include, for example, blinker holders, reflector holders or other customizing components.Legally compliant conversionThe design takes into account the legal requirements regarding license plate position, license plate angle and license plate illumination. This provides you with a technically tested and legally compliant solution for your motorcycle conversion.
The side license plate holder comes from German production and is manufactured under the Burchard Excellence brand. The design is based on high-quality materials and precise workmanship for long-term use on the motorcycle.With TTG part type approval. A part type approval is a national approval from the Federal Motor Transport Authority (KBA) for vehicle parts. It confirms that the part meets the legal requirements and may be used on the motorcycle models listed in the approval. Please refer to the relevant vehicle list and the associated conditions.Suitable for the following vehiclesSuitable for:Manufacturer: TriumphCommercial designation: Rocket IIIType: C23XBTypgenehmigung:e112002/240108*IMPORTANT: ONLY FITS IN CONJUNCTION WITH A SHORT EXHAUST SYSTEMMaterial and surfacesThe license plate holder is made of high-quality steel and is available in different finishes depending on the variant:High-gloss chrome-platedNickel-plated and glossy black powder-coatedNickel-plated and matt black powder-coatedThe desired surface can be easily selected via the variant selection in the store.Available license plate sizesThe side license plate holder is available for various international license plate sizes and is therefore suitable for many European countries.ExamplesGermany: 180x200 mm to 220x200 mmAustria: 210x170 mmSwitzerland: 180x140 mmDenmark: 230x170 mmFrance: 170x130 mmNetherlands: 210x145 mmItaly: 175x175 mmand many moreThe desired license plate size is selected via the variant selection.LED license plate illuminationThe scope of delivery includes modern LED license plate lighting with 3 SMD diodes. The lighting has a valid E test mark in accordance with StVZO and ensures even and optimum illumination of the license plate.Scope of deliveryA completely pre-assembled side license plate holder is included in the delivery:LED license plate lightPart type approval from the KBACable set for extending the power cableScrew materialAssembly instructionsPreparation and removal of the original partsFirst remove the lower screw of the original shock absorber. Then remove the original cap nuts from the propshaft. The original stud bolts in the propshaft must also be removed.Note:The stud bolts are usually fitted with threadlocker. Carefully heat the stud bolts and then unscrew them from the propshaft.Fitting the side license plate holderFit the pre-assembled side license plate holder to the original fastening points of the cardan drive. To do this, use the two screws supplied for the cardan drive, the spacer bush and the screw for fastening to the shock absorber.Dismantling the original license plate holderThe original license plate holder including indicators and reflectors can no longer be used. Dismantle the original license plate holder completely and also remove the original indicators.Fitting the indicatorsThe indicators must be mounted at another suitable location on the vehicle. The two rear holes in the rear struts are recommended.Important note:If the original indicators are not used, indicators with a valid E approval mark must be fitted.Fitting the rear reflectorThe reflector must be refitted below the mudguard.Laying the license plate lightPull back the cable of the original license plate light and route the cable along the cardan shaft on the inside of the license plate holder to the LED license plate light. Then connect the LED license plate light to the original vehicle cables.Fitting the license plateMount the license plate on the license plate plate of the side license plate holder.Final workCheck all screw connections for tightness and then check the correct function of all lighting equipment including indicators and license plate illumination.Advantages of the side license plate holderImproved vehicle appearancePositioning the license plate on the side creates a much tidier rear view. This creates a clean and high-quality look, especially for bobber, chopper or cafe racer conversions.Individual conversions and customizingThe license plate holder can be ideally combined with other accessories. These include blinker adapters or reflector holders, for example. This allows you to customize the rear of your motorcycle and at the same time use a stable and high-quality solution.Legally compliant implementationThe design takes into account the legal requirements regarding license plate angle, stability and illumination. Thanks to the tested design and the existing part type approval from the KBA, the license plate holder is ideal for high-quality and road-approved conversions.
The BIHR handlebar switch unit is specially designed for KTM motorcycles and is ideal for replacing or preparing for competitions.This switch unit combines several functions in a compact design: it controls the lights, the horn and has a kill switch. This makes it a practical solution for any KTM rider who values functionality and reliability.Functionality: lights, horn, kill switchSpecially developed for KTM modelsIdeal for replacement or competition use
The BIHR ignition lock is the perfect solution for replacing a defective original ignition switch on your YAMAHA XT-Z 750 or FJ1200.This OE-type ignition lock offers an exact fit and includes a steering lock with wiring harness connector and a set of ignition keys. Trust the quality and reliability of BIHR to ensure the safety of your motorcycle.OE type ignition lockSteering wheel lock includedWith connection for wiring harnessSet with ignition keys included
The TECNIUM circuit breaker is an indispensable accessory for KTM motorcycles that enables safe and reliable disconnection of the battery.This high-quality disconnector protects your motorcycle from unwanted power consumption and ensures a longer battery life. Ideal for use in the workshop or for customizing.Material: High-quality plasticHomologation: CE-certifiedVoltage: 12 volts
The BIHR ignition lock is the ideal solution for replacing a defective original ignition switch for the YAMAHA YZF-R6 and YZF-R1.This high-quality spare part includes not only the ignition lock, but also the steering wheel lock with connection for the wiring harness and a set of ignition keys. This ensures reliable and safe operation of your motorcycle.OE typeSteering wheel lock includedSet with ignition keys included
The high-quality ignition switch SET for the Daelim VJ Roadwing 125 ensures reliable ignition and optimum engine performance.This ignition switch is specially designed for use in the Daelim VJ Roadwing 125 and ensures easy installation and long-lasting use. Rely on the quality and precision of our products to maximize the performance of your motorcycle.Compatible with Daelim VJ Roadwing 125High quality materials for durabilityEasy to install
The TECNIUM shift lever in black is the ideal choice for your Suzuki DR250, DR350 and DR650SE. It replaces the OEM part number 25600-14D04 and offers a high-quality and reliable solution for your shifting needs.Made from robust material, this shift lever guarantees a long service life and precise shifting performance. Go for quality and trust TECNIUM for your motorcycle spare parts.Color: Black
The TECNIUM shift lever in silver is the ideal choice for your Honda XL80, XL100, XL200, XL250 and XL500. It replaces the OEM part number 24701-KN1-000 and offers reliable functionality.This shift lever combines quality and durability and is specially designed for use in motorcycles. It ensures precise gear changes and helps to improve riding dynamics.Color: Silver
The TECNIUM shift lever in black is the perfect choice for Yamaha motorcyclists who value quality and functionality.This shift lever replaces the OEM part number 2RH-18110-00 and offers a reliable solution for replacing defective or worn parts. Made from high-quality materials, it guarantees a long service life and optimum performance.Color: Black
The TECNIUM shift lever in black is the ideal choice for Honda XL125S and XL185S models. It offers a reliable and precise shifting function that meets the requirements of motorcyclists.This shift lever replaces the OEM part number 24700-437-000 and impresses with its high-quality workmanship and durability. It is easy to install and ensures optimum shifting performance.Color: Black
The TECNIUM clutch cable offers reliable and precise control of your clutch. It is specially designed for use in various motorcycle models and ensures optimum functionality.Made from high-quality materials, this clutch cable ensures a long service life and maximum performance. Ideal for motorcyclists who value quality and safety.Material: High-quality steelHomologation: Complies with OEM specifications
The TECNIUM speedometer drive shaft offers a reliable and durable solution for your motorcycle.Made from highly resistant and flexible steel, it combines safety and reliability. The sheaths are equipped with nylon inserts for more comfortable handling.Material: Highly resistant steelSheathing: Nylon inserts for better comfort
The TECNIUM throttle cable - opener & closer offers you safety and reliability for your motorcycle.With a sheath of highly resistant and supple steel, these throttle cables ensure precise control. The integrated nylon inserts in the hoses also ensure a comfortable grip and improved handling.Material: Highly resistant steel with nylon insertsFunction: Opener & closer
The TECNIUM throttle cable opener offers an optimum combination of safety and reliability.The sheathing made of highly resistant and supple steel ensures long-lasting use. The integrated nylon inserts in the sheaths enable comfortable handling and precise control.Material: Highly resistant steelWith nylon inserts for better comfort
The TECNIUM speedometer drive shaft offers a reliable and durable solution for your motorcycle.Made from highly resistant and flexible steel, it combines safety and reliability. The sheaths are equipped with nylon inserts for more comfortable handling.Material: Highly resistant steelSheathing: Nylon inserts for better comfort
The TECNIUM throttle cable - closer offers an optimum combination of safety and reliability.The sheathing is made of highly resistant and flexible steel, which ensures a long service life. The integrated nylon inserts in the hoses enable comfortable handling and precise control.Material: Highly resistant steelSheathing: Nylon inserts for better comfort
The TECNIUM speedometer drive shaft offers a reliable and durable solution for your motorcycle.Made from highly resistant and flexible steel, it combines safety and reliability. The sheaths are equipped with nylon inserts for more comfortable handling.Material: Highly resistant steelSheathing: Nylon inserts for better comfort
The TECNIUM speedometer drive shaft offers a reliable and durable solution for your motorcycle.Made from highly resistant and flexible steel, it combines safety and reliability. The sheaths are equipped with nylon inserts for more comfortable handling.Material: Highly resistant steelSheathing: Nylon inserts for better comfort
The TECNIUM speedometer drive shaft offers a reliable and durable solution for your motorcycle.Made from highly resistant and flexible steel, it combines safety and reliability. The sheaths are equipped with nylon inserts for more comfortable handling.Material: Highly resistant steelSheathing: Nylon inserts for better comfort
The TECNIUM speedometer drive shaft offers you maximum safety and reliability for your motorcycle.Made from durable and flexible braided steel, this drive shaft ensures precise transmission of speedometer readings. The sheathing with nylon inserts ensures maximum feel and protects the shaft from wear and tear.Material: Braided steelSheathing: Nylon insertsFeatures: Resistant, flexible, safe
The TECNIUM speedometer drive shaft offers you a reliable connection between your motorcycle and the speedometer.The speedometer cables are braided from extra robust, flexible steel, which guarantees a long service life. The plastic sheath protects the sensitive components and is equipped with nylon inserts to ensure optimum reliability.Material: Braided steelProtection: Plastic cover with nylon inserts
The TECNIUM speedometer drive shaft offers a reliable and durable solution for your motorcycle.Made from highly resistant and flexible steel, it combines safety and reliability. The sheaths are equipped with nylon inserts for more comfortable handling.Material: Highly resistant steelSheathing: Nylon inserts for better comfort
The TECNIUM clutch cable offers a reliable and durable solution for your motorcycle clutch.With OEM sizes and a robust steel cable protected by a reinforced sheath, this clutch cable ensures optimum functionality and safety. Ideal for use in various motorcycle models.Material: SteelReinforced sheathOEM sizes