Motorcycle handlebars

HIGHSIDER pro special handlebar ends for PIAGGIO VESPA models, black (1 pair)Perfect fit. Stylish. Functional.The HIGHSIDER pro special handlebar end is the clever solution for the quick and clean installation of handlebar end mirrors on your Vespa.Specially developed for PIAGGIO VESPA models, it combines the adapter and handlebar end in one component - no additional adapters are required. This saves time during installation and ensures a tidy look on the handlebars.It is fitted directly to the original handlebar mount - insert, tighten, done.Perfect for anyone who wants to see design, function and quality combined in one product.Note: This handlebar end is intended exclusively for mounting mirrors and cannot be combined with lever protection systems.Dimensions:Outer diameter: 35 mmMirror clamping diameter: 30 mmComponent height: 26 mm Scope of delivery:2x special handlebar ends for PIAGGIO VESPA2x spacer plates2x screws

HIGHSIDER pro handlebar end adapter for PIAGGIO VESPA modelsPerfect fit. Stylish. Functional.With the HIGHSIDER pro handlebar end adapter, you can equip your Vespa precisely and safely. The adapter, specially developed for PIAGGIO VESPA models, enables the installation of handlebar end mirrors, handlebar weights or lever protection systems - without any time-consuming modifications to the original handlebars.It is fitted directly to the original handlebar mount and can be combined with the matching HIGHSIDER pro components.The adapter can be optimally adjusted using the enclosed spacer plates.A well thought-out component for all those who expect design, function and quality.Dimensions:Outer diameter: 35 mmComponent height: 4 mm Scope of delivery:2x handlebar end adapter for PIAGGIO VESPA2x spacer plates4x screws (in two lengths)

X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality, which is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.the basis for this exceptional stability of the handlebars is the thick diameter in the clamping area and the even, conical transition to the grip area.the handlebars bounce less and offer more reserves under extreme loads.the diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.the wall thickness at the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.However, there are also exceptions, e.g. HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount, so please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER pro steel handlebars 22.0mmThe handlebar ends are specially prepared for the original end pieces and grip heating of the R850 R, R1100 R and R1150 R models.HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own selection of materials and the manufacturing quality of the handlebars, which has been optimized over decades. The steel handlebars with an outer diameter of 22.0 mm are particularly suitable for use on youngtimers of German and Italian manufacture, as they also had original handlebars with a diameter of 22.0 mm, and the handlebars of some later BMW and Ducati models also had this metric dimension. 2 mm wall thickness of the steel handlebars (18 mm inside). The surface is highly polished and chrome-plated or black KTL-coated.the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars. 22.0 mm handlebars are supplied with a parts certificate. The parts certificate lists a few vehicle types as examples, but it can be used on many more vehicles, not all of which we were able to list.The parts certificate then serves the expert as a profound basis for the individual approval and registration of the handlebar in the vehicle documents.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaners on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality, which is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.the basis for this exceptional stability of the handlebars is the thick diameter in the clamping area and the even, conical transition to the grip area.the handlebars bounce less and offer more reserves under extreme loads.the diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.the wall thickness at the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality, which is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.the basis for this exceptional stability of the handlebars is the thick diameter in the clamping area and the even, conical transition to the grip area.the handlebars bounce less and offer more reserves under extreme loads.the diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.the wall thickness at the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.However, there are also exceptions, e.g. HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount, so please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.However, there are also exceptions, e.g. HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount, so please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality, which is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.the basis for this exceptional stability of the handlebars is the thick diameter in the clamping area and the even, conical transition to the grip area.the handlebars bounce less and offer more reserves under extreme loads.the diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.the wall thickness at the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.However, there are also exceptions, e.g. HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount, so please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality, which is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.the basis for this exceptional stability of the handlebars is the thick diameter in the clamping area and the even, conical transition to the grip area.the handlebars bounce less and offer more reserves under extreme loads.the diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.the wall thickness at the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

X-Bar aluminium handlebars from HIGHSIDER pro - 28.6mm Ø in the clamping area / 22.2mm Ø in the grip areaHIGHSIDER pro stands for outstanding handlebar quality, which is due to the company's own selection of materials and material treatment as well as the production quality of the handlebars, which has been optimized over decades. The X-Bar handlebars impress with twice the bending stiffness of standard handlebars.the basis for this exceptional stability of the handlebars is the thick diameter in the clamping area and the even, conical transition to the grip area.the handlebars bounce less and offer more reserves under extreme loads.the diameter of the handlebars is 28.6 mm in the clamping area and tapers to 22.2 mm towards the grip tube.the wall thickness at the handlebar ends is 4 mm (inner Ø 14 mm). The surface is matt bead-blasted or high-gloss polished.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is expanded every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never clean in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.However, there are also exceptions, e.g. HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount, so please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

7/8 inch (22.2mm) aluminum handlebars from HIGHSIDER proHIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In the 1990s, HIGHSIDER pro worked out the perfect alloy, heat treatment and processing method in its own series of tests. The result is a product that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with a specially developed in-house test program, which ensures the high quality of the handlebars.HIGHSIDER pro aluminium handlebars have an outer diameter of 22.2 mm and a wall thickness of 4 mm (14 mm inside). The surface is highly polished and available in up to six anodized colors, depending on the handlebar type. Handlebars in black are also available in matt bead blasted.the handlebars are supplied without drill holes for the anti-rotation lock of the switch fittings.we recommend using a HIGHSIDER pro drilling template in order to adopt the position of the drill holes from the standard handlebars in the best possible way.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.In the ABE you will find reliable documentation of which handlebar type fits and is approved for your motorcycle.as a rule, the assignments in the ABE are without conditions.however, there are also exceptions.for example, HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry out.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER pro steel handlebars in 1-inch HIGHSIDER pro stands for outstanding handlebar quality. The HIGHSIDER pro handlebars are made of high-quality steel with a large wall thickness and are characterized by an extraordinary rigidity and reduced tendency to vibrate. 25.4 mm sporty handlebars are also available from HIGHSIDER pro, with a continuous outer diameter of 25.4 mm and a wall thickness of 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated, and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars, and a version with a pressed-in cut-out for cable routing (H-D bead) is available for use on Harley models.all HIGHSIDER pro handlebars are supplied with ABE.The range of models is huge and is expanded every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.as a rule, the assignments in the ABE are without conditions.but there are also exceptions.therefore check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER pro steel handlebars in 1-inch with H-D beadHIGHSIDER pro stands for outstanding handlebar quality. The HIGHSIDER pro handlebars are made of high quality steel with a large wall thickness and are characterized by their extraordinary rigidity and reduced tendency to vibrate.In addition to the classic shapes, HIGHSIDER pro also offers sporty handlebar variants in 25.4 mm.With a continuous outer diameter of 25.4 mm, the wall thickness of the handlebars is 3 mm (19.4 mm inside). The surface is high-gloss polished and chrome-plated, or black KTL-coated, and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars, and a version with a pressed-in cut-out for cable routing (H-D bead) is available for use on Harley models.all HIGHSIDER pro handlebars are supplied with ABE.The range of models is huge and is expanded every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.as a rule, the assignments in the ABE are without conditions.but there are also exceptions.therefore check the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.

HIGHSIDER pro steel handlebars 7/8 inch (22.2mm)HIGHSIDER pro stands for outstanding handlebar quality. This is due to the company's own choice of material and material treatment as well as the production quality of the handlebars, which has been optimized over decades. In its own test series in the 1990s, HIGHSIDER pro researched the load on handlebars during riding and designed its own handlebars to withstand the actual load. The result is a product made of high-strength steel that combines extremely high bending stiffness with resistance to breakage. To confirm the consistent quality, HIGHSIDER pro regularly tests its handlebars with its own test program, which ensures the consistent quality of the handlebars.The HIGHSIDER pro steel handlebars have an outer diameter of 22.2mm (7/8 inch) and a wall thickness of 2mm (18mm inside). The surface is high-gloss polished and chrome-plated or black KTL-coated and the handlebars are supplied without holes for the anti-rotation protection of the switch fittings. We recommend using the HIGHSIDER pro drilling template to ensure that the position of the holes is as close as possible to the standard handlebars.all HIGHSIDER pro handlebars are supplied with ABE.the model range is huge and is extended every year with new entries.the ABE reliably documents which handlebar type fits and is approved on the motorcycle.However, there are also exceptions, e.g. HIGHSIDER pro offers handlebar mounts for many models, with which you can also mount one of the X-Bar handlebars on a motorcycle with a standard 22.2 mm mount, so please refer to the entry for your motorcycle in the ABE.If you cannot find your vehicle in the ABE, the ABE can be used as an accompanying document for an individual approval.Scope of delivery: 1 pieceCare instructions:- Only use acid and alkali-free cleaner on all handlebars and their surface variants!- Never use in direct sunlight and do not allow the cleaner to dry.- Avoid contact with brake fluid, brake cleaner, oil, fuel, polishing pastes with abrasive particles, etc., wipe up any dripping immediately with a soft cloth.- Test the compatibility of cleaning agents on an inconspicuous area before use.- No guarantee or warranty in the event of improper cleaning and care.