Supplied with parking light bulb but without H4 bulb.The headlight has a cut-out on the housing for our DAYTONA VELONA speedometers. If no speedometer is used, the supplied cover cap can be inserted into the hole. with side mounting, black metal housing with speedometer cut-out, with parking lightE-approved.Accessories: Mounting bracket for VELONA speedometers #361-556.
Supplied with parking light bulb but without H4 bulb.The headlight has a cut-out on the housing for our DAYTONA VELONA speedometers. If no speedometer is used, the supplied cover cap can be inserted into the hole. with side mounting, black metal housing with speedometer cut-out, with parking lightE-approvedAccessories: Mounting bracket for VELONA speedometers #361-556.Included in the scope of delivery: 1 piece
HIGHSIDER main headlight IOWAH4 halogen main headlight including parking light with clear glass in a black oval metal housing for lower mounting.The reflector emits a bright, symmetrical light - for good road illumination and optimum visibility, E-approvedSee and be seen - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Technical specifications:Illuminant: H4, 12 V 60/55W Width: 175 mmHeight: 102 mm Depth: 132 mmMounting lamp ring : laterally with M3 hexagon socket screws, M3 x 0.5 mm, length: 15 mm, (actual thread length: 12 mm), head diameter: 5 mm. Bottom mounting: M10Connections:Black cable = ground (-) Yellow cable = low beam (+) Blue cable = high beam (+) Parking light: Green cable = parking light (+)Black cable = earth (-) Scope of delivery: 1 piece
HIGHSIDER main headlight IOWAH4 halogen main headlight including parking light with clear glass in a chrome-plated oval metal housing for lower mounting.The reflector emits a bright, symmetrical light - for good road illumination and optimum visibility, E-approvedSee and be seen - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Technical specifications:Illuminant: H4, 12 V 60/55W Width: 175 mmHeight: 102 mm Depth: 132 mmMounting lamp ring : laterally with M3 hexagon socket screws, M3 x 0.5 mm, length: 15 mm, (actual thread length: 12 mm), head diameter: 5 mm. Bottom mounting: M10Connections:Black cable = ground (-) Yellow cable = low beam (+) Blue cable = high beam (+) Parking light: Green cable = parking light (+)Black cable = earth (-) Scope of delivery: 1 piece
HIGHSIDER main headlight IOWAH4 halogen main headlight including parking light with blue glass in a black oval metal housing for lower mounting.The reflector emits a bright, symmetrical light - for good road illumination and optimum visibility, E-approvedSee and be seen - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Technical specifications:Illuminant: H4, 12 V 60/55W Width: 175 mmHeight: 102 mm Depth: 132 mmMounting lamp ring : laterally with M3 hexagon socket screws, M3 x 0.5 mm, length: 15 mm, (actual thread length: 12 mm), head diameter: 5 mm. Bottom mounting: M10Connections:Black cable = ground (-) Yellow cable = low beam (+) Blue cable = high beam (+) Parking light: Green cable = parking light (+)Black cable = earth (-) Scope of delivery: 1 piece
HIGHSIDER main headlight IOWAH4 halogen main headlight including parking light with blue glass in a chrome-plated oval metal housing for lower mounting.The reflector emits a bright, symmetrical light - for good road illumination and optimum visibility, E-approvedSee and be seen - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Technical specifications:Illuminant: H4, 12 V 60/55W Width: 175 mmHeight: 102 mm Depth: 132 mmMounting lamp ring : laterally with M3 hexagon socket screws, M3 x 0.5 mm, length: 15 mm, (actual thread length: 12 mm), head diameter: 5 mm. Bottom mounting: M10Connections:Black cable = ground (-) Yellow cable = low beam (+) Blue cable = high beam (+) Parking light: Green cable = parking light (+)Black cable = earth (-) Scope of delivery: 1 piece
Rectangular headlampH4 clear glass insert with parking lightBlack ABS housingapproved as main headlamp, E-approvedLight source: H4 12V 60/55W Mounting: on the side with M8 threaded bolt DimensionsDepth: 115mm Width: 145mm Height: 105mmIncluded in delivery: 1 piece
SHIN YO CYCLOPS main headlampInnovative ellipsoid headlamp with electronic shutter for low beam and high beam. High-quality black matt metal housing with M8 fastening on the side. This headlight with an LED position light ring lets your vehicle shine in a new light, E-approved.Dimensions: Diameter: 190 mmDepth: 160 mmFrom mounting point to rear housing approx. 90 mmTechnical data:3-way plug for ellipsoid use with shuttergreen = earth (-)white = low beam (+)blue = high beam (+)LED ring for front position lightbrown = plus (+)black = earth (-)Bulb: H3 bulb 12V 55W, PK 22SScope of delivery: 1 pieceSpare parts:Replacement ellipsoid headlight insert: Art. No. 223-309Replacement control unit: Art. No. 223-309K Replacement bulb: Art. No. 209-170
SHIN YO RENO 27-inch main headlamp with LED position light in the lamp ring. H4 prismatic reflector in a chrome-plated metal housing with M8 mounting on the side. E-approvedHeadlight dimensions: Housing diameter: 200 mmDiameter of headlight insert: 178 mm Housing depth: 160 mmDistance between the mounting holes (center - center): 170 mmDistance between mounting hole (center) and end of housing: approx. 90 mmFastening: laterally with M8 threaded boltTechnical data:3-way plug for H4 usegreen = earth (-)white = low beam (+)blue = high beam (+)LED ring for front position lightbrown = plus (+)black = earth (-)Scope of delivery: 1 pieceSpare parts:Symmetrical insert: Art. No. 226-178 Replacement bulb H4 Art. No.:209-101 Performance +50%209-105 P43T209-114 Duty / Highlife209-121 Cobalt209-122 Power White
SHIN YO RENO 27-inch main headlamp with LED position light in the lamp ring. H4 prismatic reflector in a black metal housing with M8 mounting on the side. E-approved.Headlight dimensions: Housing diameter: 200 mmDiameter of headlight insert: 178 mm Housing depth: 160 mmDistance between the mounting holes (center - center): 170 mmDistance between mounting hole (center) and end of housing: approx. 90 mmFastening: laterally with M8 threaded boltTechnical data:3-way plug for H4 usegreen = earth (-)white = low beam (+)blue = high beam (+)LED ring for front position lightbrown = plus (+)black = earth (-)Scope of delivery: 1 pieceSpare parts:Symmetrical insert: Art. No. 226-178 Replacement bulb H4 Art. No.:209-101 Performance +50%209-105 P43T209-114 Duty / Highlife209-121 Cobalt209-122 Power White
SHIN YO 7 inch headlight RENO Round main headlight for side mounting. Thanks to its purist, timeless design, it is a highlight for many motorcycles. The headlight has an H4 insert with high beam and parking light function as well as a symmetrical prismatic reflector and clear plastic lens, E-approvedHeadlight dimensions: Housing diameter: 200 mmDiameter of headlight insert: 178 mm Housing depth: 160 mmDistance between mounting holes (center - center): 170 mmDistance between mounting hole (center) and end of housing: approx. 90 mmFastening: laterally with M8 threaded boltScope of delivery: 1 piece available in different colors.Optionally available:Replacement reflector: H4 main headlight insert, item no.: 226-178 Note: Symmetrical insert, approved for right and left-hand traffic.
SHIN YO 7 inch headlight RENO Round main headlight for side mounting. Thanks to its purist, timeless design, it is a highlight for many motorcycles. The headlight has an H4 insert with high beam and parking light function as well as a symmetrical prismatic reflector and clear plastic lens, E-approvedHeadlight dimensions: Housing diameter: 200 mmDiameter of headlight insert: 178 mm Housing depth: 160 mmDistance between mounting holes (center - center): 170 mmDistance between mounting hole (center) and end of housing: approx. 90 mmFastening: laterally with M8 threaded boltScope of delivery: 1 piece available in different colors.Optionally available:Replacement reflector: H4 main headlight insert, item no.: 226-178 Note: Symmetrical insert, approved for right and left-hand traffic.
SHIN YO 6-1/2 inch main headlightAsymmetrical headlight with a metal housing in chrome, clear plastic lens and bottom mounting, E-approved.Dimensions:Housing diameter: 190 mmDepth: 157 mmBulb: H4 12V 55 / 60WScope of delivery: 1 pieceSpare parts:Replacement insert: Art. no. 226-165Replacement bulb H4 Art. No.: 209-101 Performance +50%209-105 P43T209-114 Duty / Highlife209-121 Cobalt209-122 Power WhiteNotes: Asymmetrical reflectors are only approved for right-hand traffic
SHIN YO 6-1/2 inch main headlightAsymmetrical headlight with a metal housing in satin black, clear plastic lens and bottom mounting, E-approved.Dimensions:Housing diameter: 190 mmDepth: 157 mmBulb: H4 12V 55 / 60WScope of delivery: 1 pieceSpare parts:Replacement insert: Art. no. 226-165Replacement bulb H4 Art. No.: 209-101 Performance +50%209-105 P43T209-114 Duty / Highlife209-121 Cobalt209-122 Power WhiteNotes: Asymmetrical reflectors are only approved for right-hand traffic
SHIN YO 5 3/4-inch main headlamp with parking light for side mounting, E-approvedH4 main headlamp in a matt black metal housing with adjustable inner ring and ribbed lens. The headlight has an asymmetrical reflector - only approved for right-hand traffic - and parking light, E-approved.Dimensions:Housing diameter: 165 mmTotal depth including curved glass: 145 mmFastening: M8 mounting on the sideHousing depth: approx. 75 mm (center of side mounting holes to rear).Light source: H4, 12V 60/55 WConnections:Black cable = ground parking light (-)Brown cable = parking light (+)White cable = low beam (+)Blue cable = high beam (+)Green cable = earth (-)Scope of delivery: 1 piece consisting of headlight and bulbSpare parts:Replacement insert: item no. 226-130Replacement bulb: 209-101 & 209-105Notes: Asymmetrical reflectors are only approved for right-hand traffic
SHIN YO 5 3/4-inch main headlamp with parking light for side mounting, E-markedH4 main headlamp in a matt black metal housing with adjustable inner ring and ribbed glass. The headlight has an asymmetrical reflector - only approved for right-hand traffic - and parking light, E-approved.Dimensions:Housing diameter: 165 mmTotal depth including curved glass: 145 mmFastening: M8 mounting on the sideHousing depth: approx. 75 mm (center of side mounting holes to rear).Light source: H4, 12V 60/55 WConnections:Black cable = ground parking light (-)Brown cable = parking light (+)White cable = low beam (+)Blue cable = high beam (+)Green cable = earth (-)Scope of delivery: 1 piece consisting of headlight and bulbSpare parts:Replacement insert: item no. 226-130Replacement bulb: 209-101 & 209-105Notes: Asymmetrical reflectors are only approved for right-hand traffic
HIGHSIDER DUAL-STREAM LED Scheinwerfer, schwarz, E-geprüftDer kleine All-in-One Ellipsoidscheinwerfer mit runder Linse ist ein leistungsstarker LED Hauptscheinwerfer in einem schwarzen Gehäuse und robustem Halter. Das Besondere am HIGHSIDER DUAL-STREAM ist der Standlicht Leuchtring um die Ellipsoidlinse und die Shuttertechnik durch die eine mechanische Blende zwischen Fern- und Abblendlicht wechselt. Durch die Verwendung dieser modernen LED-Technik sind geringste Gehäuseabmessungen bei gleichzeitig größtmöglicher Lichtausbeute realisierbar.Unsere Highlights – gib deinem Bike einen unverwechselbaren Stil! Das ausgefallene Design und die perfekte Technologie der HIGHSIDER-Scheinwerfer-Serien machen es jeden Fall zu einem Highlight! Maße: Durchmesser Linse: ca. 45 mm Höhe: 70,2 mm Breite: 67 mm Tiefe: 96,5 mm Abstand der Befestigungslöcher: 67 mm Befestigungslöcher seitlich: M 5 mm Material Gehäuse: AluminiumGewicht: 0,230 KgLeistungsaufnahme:12V / 12W, 739.3 lm, Abblendlicht12V / 19 W, 739.3 lm, FernlichtAnschlüsse: Positionslicht = braun Abblendlicht = weiß Das weiße Kabel wird an Zündungsplus angeschlossen (+) Fernlicht = blau Masse = Grün (-) Lieferumfang: 1 Stück
HIGHSIDER 5 3/4 inch LED headlight PECOS TYPE 7 with parking light ring, black, E-approvedPuristically shaped main headlight with matt black metal housing and side mounting points. The PECOS TYPE 7 is characterized by the latest lighting technology and exceptional lighting design. The special feature of this LED headlamp with parking light ring is the dark look thanks to the matt black housing and the inconspicuous reflector in black. The low beam lights up in the upper section of the headlight and both sections light up when the high beam is switched on.Our highlights - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Features:- Light source: LED- Glass: clear- Black reflector with parking light ring- Mounting point: on the side with M6 threadDimensions:Housing diameter: 165 mmDepth: 135 mmDistance between fixing points: approx. 160 mmConnections:Power consumption: 3 pin plugWhite = low beam (+)Red = High beam (+)Black = earth (-)Green = position light (+)Scope of delivery: 1 piece
HIGHSIDER 5 3/4 inch LED headlight PECOS TYPE 6 with TFL, black, E-approvedPuristically shaped main headlight with matt black metal housing and side mounting points. The PECOS TYP 6 is characterized by the latest lighting technology and the great lighting design. The special feature of this LED headlamp is the additional daytime running light and parking light ring. The daytime running light for even greater visibility in road traffic is located in the middle of the strip. The dipped beam lights up in the upper half of the headlamp and both halves light up when the main beam is switched on.A real eye-catcher - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Features:- Light source: LED- Glass: clear- Chrome-plated reflector with TFL/DRL and parking light ring- Mounting point: on the side with M6 thread Dimensions:Housing diameter: 165 mmDepth: 135 mmDistance between fixing points: approx. 160 mmConnections:Power consumption: 3-pin plugWhite = low beam (+)Blue = High beam (+)Green = earth (-)Red = TFL/DRL (+) to ignition positiveBrown = position light (+)Scope of delivery: 1 pieceCan be ordered as an option:- HIGHSIDER DRL CONTROL- BOX CB1 , Daytime running light control box for vehicles without light switch, 12V Part no.: 208-108- Light switch on/off with clamp for handlebar mounting e.g. part no.: 240-044
HIGHSIDER 5 3/4 inch LED headlight PECOS TYPE 5, black, E-approvedPuristically shaped main headlight with matt black metal housing has a high beam, low beam and parking light function. The dipped beam lights up in the upper half and both halves of the headlight light up when the main beam is switched on. The simple design is ideal for classic bikes, roadsters and customized bikes. Our highlights - give your bike an unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series make it a highlight in any case!Features:- Light source: LED- Glass: clear- Chrome-plated reflector with black cover- Mounting point: on the side with M6 threadDimensions:Housing diameter: 165 mmDepth: 135 mmDistance between fixing points: approx. 160 mmConnections: Power consumption: 3 pin plugRed = low beam (+)White = High beam (+)Brown = position light (+)Black = earth (-)Scope of delivery: 1 piece
HIGHSIDER ULTIMATE LED Scheinwerfer mit HIGHSIDER Wave-Halter, schwarz, seitliche BefestigungRunde Scheinwerfer gibt es zu genüge. Umso ausgefallener gestalten Sie Ihr Motorrad, wenn Sie sich für dieses Set mit rechteckigen Scheinwerfern entscheiden. Verbunden mit dem HIGHSIDER Wave-Halter besteht dieses LED Scheinwerfer Set aus einem Fern- und Abblendscheinwerfer mit Positionsleuchte. Auf der Rückseite vom Aluminiumgehäuse befinden sich Kühlrippen. Die klare, einfache Formgebung der Scheinwerfer Set eignen sich für Streetfighter, Cruiser und Naked-Bikes.Aufsehen erregend – gib deinem Bike einen unverwechselbaren Stil! Das ausgefallene Design und die perfekte Technologie der HIGHSIDER-Scheinwerfer-Serien machen es jeden Fall zu einem Highlight!Maße:Breite 152 mmTiefe 98 mmHöhe: 121 mmAbstand der Befestigungslöcher (Mitte - Ende): 62 mmBefestigung: Befestigungslöcher seitlich mit Ø M 10Anschlüsse:Schwarzes Kabel (2x) = Masse (-) Gelbes Kabel = Fernlicht (+)Blaues Kabel = Abblendlicht (+)Weißes Kabel = Positionsleuchte (+)Lieferumfang: 1 Stück
HIGHSIDER LED-Scheinwerfer ULTIMATE mit Z- Halter, schwarz, seitliche BefestigungRunde Scheinwerfer gibt es zu genüge. Umso ausgefallener gestalten Sie Ihr Motorrad, wenn Sie sich für dieses Set mit rechteckigen Scheinwerfern entscheiden. Verbunden mit einem Halter in Z-Form besteht dieses LED-Scheinwerfer Set aus einem Fern- und Abblendscheinwerfer mit Positionsleuchte. Auf der Rückseite vom Aluminiumgehäuse befinden sich Kühlrippen. Die klare, einfache Formgebung der Scheinwerfer Set eignen sich für Streetfighter, Cruiser und Naked-Bikes.Aufsehen erregend – gib deinem Bike einen unverwechselbaren Stil! Das ausgefallene Design und die perfekte Technologie der HIGHSIDER-Scheinwerfer-Serien machen es jeden Fall zu einem Highlight!Maße:Breite 146 mmTiefe 73 mmHöhe: 124 mmAbstand der Befestigungslöcher (Mitte - Mitte): 62 mmBefestigung: Befestigungslöcher seitlich mit Ø 10 mmAnschlüsse:Schwarzes Kabel (2x) = Masse (-) Gelbes Kabel = Fernlicht (+)Blaues Kabel = Abblendlicht (+)Weißes Kabel = Positionsleuchte (+)Lieferumfang: 1 Stück
HIGHSIDER 5 3/4 Zoll Hauptscheinwerfer CLASSIC 1 EXTREME zur unteren BefestigungH4-Halogen-Hauptscheinwerfer mit einem hochwertig verarbeiteten, schwarzen Aluminium-Gehäuse mit 3 markanten, CNC-gefrästen Rillen sowie einem nostalgischen Schirm (Länge: ca. 25 mm) im Retro-Look. Der Scheinwerfer verfügt über einen asymmetrischen - nur für den Rechtsverkehr zugelassenen - Prismenreflektor und Standlicht, E-geprüft.Aufsehen erregend – gib deinem Bike einen unverwechselbaren Stil! Das ausgefallene Design und die perfekte Technologie der HIGHSIDER-Scheinwerfer-Serien machen es jeden Fall zu einem Highlight!Technische Angaben:Leuchtmittel: H4, 12 V 60/55 WBefestigung: untenDurchmesser: 157 mmTiefe: 220 mmHalter Mitte Befestigungsschraube bis vorne: 127 mmHalter Zwischenraum: 18 mmBefestigung: unten Anschlüsse: Weißes Kabel = Abblendlicht (+)Grünes Kabel = Masse der H4-BirneBlaues Kabel = Fernlicht (+)Braunes Kabel = Standlicht (+)Schwarzes Kabel = Masse Standlicht (-)Lieferumfang: 1 Stück, bestehend aus Scheinwerfer und LeuchtmittelHinweise:Asymmetrischer Reflektor - nur für den Rechtsverkehr zugelassen!.Ersatz-Einsatz: 226-131
HIGHSIDER LED Hauptscheinwerfer FRAME-R2 TYP 10, E-geprüft– Montage OHNE Gehäuse, da geht ein Licht auf. –Jeder Zentimeter zählt, um den Scheinwerfer engst-möglich zwischen den beiden Standrohren in der Gabel zu platzieren. REDUCED TO THE MAX war die Prämisse bei der Entwicklung der innovativen Scheinwerfer-Halterung FRAME. Mit dem puristischen Aluminiumring ist es erstmalig möglich, verschiedene LED-Scheinwerfereinsätzen frei stehend am Motorrad zu montieren. Durch den bewussten Verzicht auf ein Scheinwerfergehäuse wird eine unschlagbar enge Einbaulage ermöglicht und zusätzlich eine bessere Kühlung der LED-Einheit erzielt.Bei vielen Motorrädern leuchtet die H4 oder H7 Lampe, die mehr oder minder vor sich hin funzelt. Besser sehen heißt meist auch zugleich, besser gesehen werden, nicht unwichtig, wenn sich der Sommer zum Herbst neigt und in Zeiten, in dem Autos zunehmend häufig mit hellem Tagfahrlicht ausgerüstet sind. Ob zum Austausch für eine bessere Sicht in der Nacht, die bessere Erkennbarkeit am Tag, oder um dem Motorrad ein schöneres Aussehen zu gönnen, wenn du einen stylisch-innovativen Power-Scheinwerfer suchst, dann ist der FRAME-R2 LED Hauptscheinwerfer eine ausgezeichnete Wahl.Zur variablen Anbringung des Scheinwerfers stehen zwei unterschiedliche Befestigungssysteme zur Verfügung.– Side Mount, die konventionelle Verschraubung seitlich am Lampenhalter– Bottom Mount, Befestigung unten zur Verschraubung auf der GabelbrückeDie Side-Mount Halter lassen sich in drei Positionen montieren, dadurch werden 32 mm in der Einbautiefe und 46 mm in der Breite ausgeglichen.Merkmale:– Runder 5 3/4 Zoll Scheinwerfer mit CNC-Haltering und Montage Kit– Anbau OHNE ein Scheinwerfergehäuse– Verbessert die Kühlung– Viele Installationsmöglichkeiten– Flachen Einbau– Moderne Optik, stylisch-innovativ- Unten und in der Mitte leuchtet das Abblendlicht- Bei Fernlicht leuchtet es oben- Standlicht ist links und rechts– E-geprüft, eingetragen werden muss nichtsGebe deinem Bike deinen unverwechselbaren Stil! Das ausgefallene Design und die perfekte Technologie der HIGHSIDER-Scheinwerfer-Serien macht dein Bike auf jeden Fall zu einem Highlight!Maße:A Durchmesser = 165 mmGA Durchmesser = 135 mmI Durchmesser = 145 mmT = 60 mmR = 27 mmVariante seitliche Befestigung: M8Anschlüsse / Leistungsaufnahme (3 Pin Stecker):Rot = Abblendlicht (+) Gelb = Fernlicht (+) Weiß = Positionsleuchte (+) Braun = Masse (-)Lieferumfang: 1 Stück