Motorcycle seat

"Made in Germany"Motorcycle seat bench with stepforHonda CMX 1100 Rebel / SC83A/BThe seat is supplied with a TÜV parts certificate in accordance with §19/3.Important mounting instructions:Frame shortening required: In order to fit this seat, the frame must be adapted. This ensures a perfect fit and secure installation.Precision gauge included in the scope of delivery: We provide you with a specially made gauge. This makes it easier for you to determine the exact shortening position required on the frame.Blanking plugs for the frame included in the scope of delivery: After fitting, the supplied blanking plugs ensure that the frame ends are aesthetically covered. This gives your bike a clean and professional look.The base plate is made of steel. The seat benches are upholstered with approx. 3 - 4 cm (hard rider seat bench, solo seat bench) or 4 - 6 cm (seat bench with step) of composite foam. A total of 18 patterns are available for our benches (see pattern table). The benches are supplied with all accessories required for assembly and, if necessary, with assembly instructions. Assembly is carried out at the original mounting points. The illustration shows sample 00 "Smooth".

"Made in Germany"Hard Rider motorcycle seatforHonda CMX 1100 Rebel / SC83A/BThe seat is supplied with a TÜV parts certificate in accordance with §19/3.Important mounting instructions:Frame shortening required: In order to fit this seat, the frame must be adapted. This ensures a perfect fit and secure installation.Precision gauge included in the scope of delivery: We provide you with a specially made gauge. This makes it easier for you to determine the exact shortening position required on the frame.Blanking plugs for the frame included in the scope of delivery: After fitting, the supplied blanking plugs ensure that the frame ends are aesthetically covered. This gives your bike a clean and professional look.The base plate is made of steel. The seat benches are upholstered with approx. 3 - 4 cm (hard rider seat bench, solo seat bench) or 4 - 6 cm (seat bench with step) of composite foam. A total of 18 patterns are available for our benches (see pattern table). The benches are supplied with all accessories required for assembly and, if necessary, with assembly instructions. Assembly is carried out at the original mounting points. The illustration shows sample 00 "Smooth".

Wer seinen Chopper oder Cruiser in einen echten Oldschool-Bobber verwandeln möchte, setzt auf zuverlässige Komponenten, die Stil und Komfort perfekt verbinden. Das Feder-Set für Bobber-Sitze von Highway Hawk bietet genau diese Mischung: klassisches Custombike-Flair und eine spürbare Verbesserung des Fahrkomforts. Die präzise gewickelten Stahlfedern – im Bild als robuste, kompakt aufgebaute Spiralfedern mit sauberer Oberfläche sichtbar – fangen Stöße effektiv ab und verleihen deinem Solositz eine angenehme, leicht gefederte Bewegung.Ideal für Umbauten im Bobber-, Vintage- und Retro-Style, sorgen die Federn für eine stabile Verbindung zwischen Rahmen und Sitzbank. Ihre Bauform bietet kontrollierten Federweg und langlebige Belastbarkeit – perfekt für puristische Bikes, die sowohl optisch als auch funktional überzeugen sollen.Technische EigenschaftenMaterial: Hochwertiger StahlHöhe: ca. 6,0 cmBefestigung: passend für M8-SchraubenMaximale Belastbarkeit: 100–110 kgPassend für Solo-Sitze: H53-180 / H53-1805 / H53-181 / H53-184 / H53-192Lieferumfang: 2 StückVorteileZuverlässiger Federweg für mehr FahrkomfortKlassische Bobber-Optik für authentische UmbautenRobuste Konstruktion für maximale StabilitätEinfache und schnelle MontageMontageDie Federn werden unkompliziert zwischen Sitzhalterung und Rahmen montiert. Dank M8-Kompatibilität lassen sie sich bei vielen Custom-Umbauten direkt einsetzen – ideal für individuelle Solositz-Lösungen.Bring mehr Charakter, Komfort und Stil auf dein Motorrad – mit den Highway Hawk Sitzfedern für klassische Bobber-Solosättel.

Für echte Bobber-Umbauten spielt die Sitzbefestigung eine zentrale Rolle – stabil, funktional und optisch passend zum individuellen Custom-Style. Das Highway Hawk Scharnier-Halterblech bietet genau diese perfekte Basis. Es dient als vordere Scharnieraufnahme für verschiedene Highway Hawk Solo-Sitze und sorgt für eine sichere, präzise und dauerhaft stabile Verbindung zwischen Sitzbank und Rahmen.Das Halteblech ist hochwertig verarbeitet, verfügt über längliche Montageschlitze zur flexiblen Positionierung des Sitzes und bietet definierte Befestigungspunkte für eine spielfreie Montage. Dank der robusten Konstruktion eignet sich das Bauteil ideal für Umbauten, die sowohl funktional als auch optisch höchsten Anspruch erfüllen sollen.Technische Eigenschaften (modellübergreifend):Material: Hochwertiger StahlFür Bobber- & Solo-SitzmontagePräzise gefertigte Langlöcher zur SitzpositionsanpassungPassend für mehrere Highway Hawk Solo-SitzmodelleStabil konstruiert für sicheren HaltLieferung: 1 StückNutzen & Vorteile:Sorgt für eine sichere, zuverlässige Befestigung der Solo-SitzbankErmöglicht eine flexible Anpassung der SitzpositionIdeal für individuelle Custom-UmbautenHochwertige Verarbeitung für lange HaltbarkeitMontage:Das Halterblech wird an der Front des Solo-Sitzes sowie direkt am Rahmen montiert. Die Langlöcher ermöglichen eine exakte Feinjustierung – perfekt, um Ergonomie und Optik ideal aufeinander abzustimmen.Perfektioniere dein Custom-Bike mit dem vielseitigen Highway Hawk Scharnier-Halterblech – die ideale Grundlage für eine stabile, individuell anpassbare Bobber-Sitzmontage!

The typical bobber style thrives on clear lines, genuine craftsmanship and pure individuality. The seat springs from Highway Hawk bring exactly this character to your motorcycle - combined with reliable function and high-quality workmanship. The robust steel springs are fully chrome-plated and give your custom project that classic vintage look that immediately catches the eye.Technical features:High-quality and durable steel springCompletely chrome-plated surfaceStandardized dimensions for solo seat conversionsMaximum load: approx. 100-110 kgSuitable for Solo seats: H53-180 / H53-1805 / H53-181 / H53-184 / H53-192Delivery: 1 piece (2 springs are required for one seat)Benefits & advantages:This seat spring not only provides an unmistakable bobber look, but also supports seating comfort. It noticeably reduces shocks and vibrations - especially on longer journeys and uneven roads. The chrome-plated surface also creates a visual highlight and visibly enhances your motorcycle.Installation:The spring is simply mounted under the Solo seat and bolted to the seat bracket. Thanks to the standardized mounting points, installation is clean and uncomplicated - ideal for custom conversions and individual projects.Turn your bike into a real eye-catcher: With the chrome-plated seat springs from Highway Hawk, you get a durable, stylish and functional custom part for your bobber or chopper conversion.

Der Bobber-Stil steht für Reduktion auf das Wesentliche, klare Formen und echte Custom-Handwerkskunst. Das Highway Hawk Bobber Sitzbank-Blech bildet genau diese DNA ab – robust, puristisch und bereit für individuelle Umbauten. Das Bild zeigt eine solide Stahlkonstruktion in mattem Schwarz mit zahlreichen Befestigungsbohrungen rundum sowie mittig platzierten M8-Gewinden. Die formschöne Kontur unterstreicht den klassischen Bobber-Look und bietet zugleich perfekte Voraussetzungen für Polster- und Bezugarbeiten.Gefertigt aus hochwertigem, schwarz beschichtetem Stahl dient das Sitzblech als stabile Basis für Solo-Sitze verschiedenster Größen und Polsterformen. Die integrierten M8-Gewinde ermöglichen eine sichere, schnelle Montage von Federn, Scharnieren und Halterungen – ideal für alle, die ihr Custom-Bike nach eigenen Vorstellungen gestalten möchten. Dank der vielseitigen Befestigungsmöglichkeiten lässt sich der Sitz optimal auf die gewünschte Sitzposition und den bevorzugten Komfort abstimmen.Technische Eigenschaften:Robuster, schwarz beschichteter StahlUmfangreiche Bohrungen zur individuellen MontageIntegrierte M8-Gewinde für Federn & ScharnierPerfekt geeignet für Bobber-, Old-School- & Dark-Custom-UmbautenMontage:Federn und Scharnier einfach an den vorhandenen Gewinden befestigen, Polsterung aufbringen, beziehen – und die Basis für eine hochwertige Solo-Sitzbank ist bereit für dein Custom-Projekt.Starte jetzt deinen Umbau und setze mit dem Highway Hawk Bobber Sitzbank-Blech auf eine langlebige, vielseitige Basis für authentische Bobber-Sitze!

Wer einen echten Bobber umbaut, beginnt immer mit dem Herzstück: der Sitzbank. Das Highway Hawk Schaumstoff-Formteil bildet die perfekte Grundlage für individuelle Solo-Sitzbänke, die Stil, Komfort und Handwerkskunst vereinen. Auf dem Produktbild ist ein helles, sauber geschnittenes Formteil mit ergonomisch geschwungener Sitzmulde zu sehen – ein weicher, dennoch formstabiler Schaumstoff, der sich ideal für DIY-Projekte und hochwertige Custom-Umbauten eignet.Die Formteile sind passgenau auf die entsprechenden Bobber-Sitzbank-Bleche abgestimmt und lassen sich problemlos weiterverarbeiten. Egal ob Leder, Kunstleder oder Vintage-Material – der Schaumstoff bietet eine optimale Basis für einen sicheren, komfortablen und optisch harmonischen Sitz. Dank der angenehmen Kontur und der robusten Struktur erhältst du eine ideale Mischung aus Sitzkomfort und puristischem Bobber-Look.Technische Eigenschaften:Ergonomisch vorgeformter SchaumstoffkörperFormstabil, flexibel zu bearbeitenIdeal zum SelberbeziehenPerfekt geeignet für individuelle Bobber-, Chopper- & Cruiser-UmbautenVorteile & Nutzen:Mit diesem Formteil entsteht die Grundlage für eine hochwertige, langlebige und individuelle Bobber-Sitzbank. Perfekt für alle, die ihr Motorrad mit Leidenschaft und Detailtreue gestalten möchten.Montage:Der Schaumstoff wird einfach auf das passende Bobber-Sitzbank-Blech aufgelegt, verklebt und anschließend mit dem gewünschten Bezugsmaterial fixiert.Starte dein nächstes Custom-Projekt – mit dem Highway Hawk Schaumstoff-Formteil als perfektem Fundament für deinen einzigartigen Bobber-Sitz!

Cafe Racer bench seat universal "Type 3 Tuck 'N Roll" in vintage brownDimensionsLength: approx. 62cmWidth: approx. 25.5cmHeight: approx. 9cmMounting points: Hole center - hole center: approx. 6cmThe mounting kit is included in the scope of delivery. Included in the scope of delivery:1 piece

Cafe Racer bench seat universal "Type 3 Tuck 'N Roll" in blackdimensionsLength: approx. 62cmWidth: approx. 25.5cmHeight: approx. 9cmMounting points: Hole center - hole center: approx. 6cmThe mounting kit is included in the scope of delivery. Included in the scope of delivery:1 piece

"Made in Germany" Motorcycle Seat Cafe racer For Kawasaki W 650 / EJ650A The base plate is made of steel. The seat benches are padded with approx. 3-4 cm (Cafe racer seat) compound foam. A total of 18 patterns are available for our seats (see picture). The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at the original frame points. The seat bench lock is taken over. The picture shows a pattern in synthetic leather (if this pattern is desired, please ask separately).

Cafe Racer bench seat universal "Type 2 Tuck 'N Roll" in blackDimensionsLength: approx. 61.5cmSaddle length: approx. 34cmWidth: approx. 16.5cm/23cmHeight: approx. 9cmMounting points: Hole center - hole center: approx. 6cm and approx. 16cmIncluded in delivery:1 piece

A traditional bobber thrives on clear lines, purist design and a characteristic solo seat. The Highway Hawk Universal Solo seat in bobber style provides the perfect basis for this - comfortable, robust and ideal for individual custom conversions.All variants are ergonomically shaped and equipped with high-quality upholstery, which ensures a pleasant seating experience on both short rides and longer distances. The classic bobber design blends in perfectly with chopper, cruiser, old-school and retro conversions.The underside of all seats has four welded-in M8 stud bolts, which can be used to securely and stably mount springs and the matching bracket. This makes the seats ideal for classic solo seat setups with springs.Whether you prefer a minimalist setup, a vintage look or a dark custom style - the variants of this solo seat cover a wide range of tastes without compromising on quality or workmanship.Technical features Universal solo seat "Bobber Style"High-quality materials (imitation leather or genuine leather depending on the variant)Underside with 4 × M8 stud bolts for mounting2 springs + 1 bracket are required for mounting (available separately)Ergonomically shaped upholsterySuitable for bobber, chopper, cruiser and custom conversionsSturdy construction for long-lasting useSuitable springs: H53-201 / 201B / 202 / 202B / 205 / 205BSuitable brackets: H53-203 / 203BBenefits & advantagesFlexible use for many conversion projectsClassic bobber design for a stylish lookComfortable upholstery for a comfortable seating positionSimple installation thanks to M8 stud bolt systemHigh-quality workmanship for long durabilityDifferent variants for visual customization of the bikeMountingThe Solo seat is connected to the springs and a bracket using the four M8 stud bolts. Two seat springs and a front bracket are required for the final installation. Installation is completed quickly and enables stable, low-vibration mounting on the motorcycle.Choose the right Solo seat from the Highway Hawk series and transform your motorcycle into a stylish bobber - individual, comfortable and absolutely authentic.

"Made in Germany" Pillion Pad for Suzuki VL 1500 Intruder / ALATTENTION: Fits only on models with brackets. Picture 3 shows the structure of the original bench. Our accessory seat is only suitable for this version. The base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam. A total of 18 patterns are available for our seats (see picture). The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at the original frame points. The picture shows pattern 10 "Westernstyle"

"Made in Germany" Motorbike Seat Soloseat for Suzuki VL 1500 Intruder / AL ATTENTION: Fits only on models with brackets. Picture 3 shows the structure of the original bench. Our accessory seat is only suitable for this version.The base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam. A total of 18 patterns are available for our seats (see picture). The seat are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at the original frame points. The picture shows pattern 10 "Westernstyle"

"Made in Germany" Motorbike Seat with step for Suzuki VL 1500 Intruder / AL ATTENTION: Fits only on models with brackets. Picture 3 shows the structure of the original bench. Our accessory seat is only suitable for this version.The base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam. A total of 18 patterns are available for our seats (see picture). The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at the original frame points. The picture shows pattern 02 "Kleinrautiert"

"Made in Germany"Motorbike Seat Hard RiderforSuzuki VL 1500 Intruder / ALATTENTION: Fits only on models with brackets. Picture 3 shows the structure of the original bench. Our accessory seat is only suitable for this version.The base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam. A total of 18 patterns are available for our seats (see picture). The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at the original frame points. The picture shows pattern 13 "Flammen"

"Made in Germany"Pillion Pad forSuzuki VS 1400 Intruder / VX51LThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 02 "Kleinrautiert"

"Made in Germany"Motorbike Seat SoloseatforSuzuki VS 1400 Intruder / VX51LThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The seat are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 02 "Kleinrautiert"

"Made in Germany"Motorbike Seat with stepforSuzuki VS 1400 Intruder / VX51LThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 06 "Scorpion"

"Made in Germany"Pillion Pad forSuzuki VZ 800 Marauder / AFThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 10 "Westernstyle"

"Made in Germany"Motorbike Seat SoloseatforSuzuki VZ 800 Marauder / AFThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The seat are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 10 "Westernstyle"

"Made in Germany"Motorbike Seat with stepforSuzuki VZ 800 Marauder / AFThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 05 "Rippet"

"Made in Germany"Motorbike Seat Hard RiderforSuzuki VZ 800 Marauder / AFThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 13 "Flammen"

"Made in Germany"Pillion Pad forSuzuki VS 600 Intruder / VN51BSuzuki VS 750 Intruder / VR51BSuzuki VS 800 Intruder / VS52BThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 10 "Westernstyle"