HIGHSIDER handlebar weights for 1 inch handlebar end mirrors for YamahaBlack anodized aluminium handlebar weights for various Yamaha original handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be mounted on these handlebar weights. Fits e.g. XJ 600 Diversion, old models, FJR 1300A, FZ1, FZ8, YZF-R125, YZF R6, YZF R1.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Please check the dimensions for accuracy of fit before purchasing!DimensionsTotal width: 34 mmWidth outside the handlebar: 28 mmScrew length: 46 mm, M6 x 1.5 mm Diameter: 25.4 mmIf the dimensions of this item do not match the removed handlebar ends, please take a look at item 161-046.Scope of delivery: 1 pair
HIGHSIDER handlebar weights for 1 inch handlebar end mirrors for YamahaBlack anodized aluminium handlebar weights for various Yamaha original handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be mounted on these handlebar weights. Fits e.g. XJ 6 Diversion, 2010, FZ 6 S2 ABS, 2010, TDM 850 / 900.Also suitable for MT-09, MT-09 Tracer, but only without mounting the hand protectors!Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Please check the dimensions for accuracy of fit before purchasing!DimensionsTotal width: 43 mmWidth outside the handlebar: 28 mmThread handlebar weight: 19 mm, M16 x 1.5 mm (the chrome-plated cap cannot be loosened)Diameter: 25.4 mmIf the dimensions of this item do not match the removed handlebar ends, please take a look at item 161-047.Scope of delivery: 1 pair
HIGHSIDER handlebar weights for 1 inch handlebar end mirrors for SuzukiBlack anodized aluminium handlebar weights for various Suzuki original handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be mounted on these handlebar weights.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Please check the dimensions for accuracy of fit before purchasing!DimensionsWidth: 28 mmScrew length: 41 mm, M6Diameter: 25.4 mmWeight: approx. 35 gScope of delivery: 1 pair
HIGHSIDER handlebar weights for 1 inch handlebar end mirrors for KawasakiBlack anodized aluminium handlebar weights for various Kawasaki original handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be mounted on these handlebar weights.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Please check the dimensions for accuracy of fit before purchasing!DimensionsTotal width: 38 mmWidth outside the handlebar: 28 mmScrew length: 53 mm, M8 Diameter: 25.4 mmScope of delivery: 1 pair
HIGHSIDER handlebar weights for 1 inch handlebar end mirrors for HondaBlack anodized aluminium handlebar weights for various Honda original handlebars. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be mounted on these handlebar weights.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Please check the dimensions for accuracy of fit before purchasing!Dimensions:Total width: approx. 41 mmWidth outside the handlebar: 28 mmScrew length: 56 mm, M6 Diameter: 25.4 mmWeight: pair approx. 140gScope of delivery: 1 pair
HIGHSIDER handlebar weights DOT, blackHandlebar weights made of black aluminum with black central screw. Universal fit for handlebars with an inner diameter of 12 to 22 mm - i.e. for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. DimensionsHandlebar weight: Diameter: 35.5 mmWidth: 17 mmMount for mirror:Diameter: 29.8 mmWidth: 12 mmWeight with attachments: 74 gThread M6 x 1.25 mmPlease check the dimensions for accuracy of fit before purchasing!Scope of delivery: 1 pair: 2 x handlebar weights each.2 x clamping sleeves D. 12 mm and D. 16 mm each.2 x centering sleeves each type 1, type 2, type 3.2 x each M6 central bolt, toothed washer and M6 conical nut.Note:Spare mounting set: 161-034
SHIN YO thread for mirror mount made of aluminum for 7/8 inch original handlebars from Honda, Suzuki, Yamaha.Threaded bolt: M10 x 1.25 / right-hand threadScope of delivery: 1 piece
Chrome-plated mirror adapter compatible for Harley-DavidsonThis adapter expands your options when choosing a mirror from our range of accessories for your Harley.You can use it to attach all mirrors with an M10 x 1.25 external thread on the stem to your Harley.Scope of delivery: 1 piecePlease note: the outer diameter of the mirror mount is 15 mm and the blind hole with the M10 x 1.25 thread is approx. 10 mm deep.
Not for use in road traffic! For show and racing purposes only!No ABE!SHIN YO FERRARA handlebar end mirror, chrome-platedBeautiful mirror made of black aluminum. A chamfer incorporated into the clamp underlines the high-quality look. Suitable for 1 inch (25.4 mm) and 7/8 inch (22 mm) handlebars.DimensionsHead width: 110 mmHead height: 65 mmHandlebar length, head to bend: 70 mmHandlebar length, bend to end of clamp: 115 mmScope of delivery: 1 pc. incl. reduction rings for 1 inch and 7/8 inchNote: Without homologation.To close any holes for mounting the original handlebar mirrors, use the HIGHSIDER sealing caps: Article 160-314
Not for use in road traffic! For show and racing purposes only!No ABE!SHIN YO Handlebar end mirror AGILA chrome-platedMirror with an oval mirror head. A jewel for naked bikes. Suitable for 1 inch and 7/8 inch handlebars. Can be used for the right and left side.DimensionsHead width: 125 mmHead height: 62 mmScope of delivery: 1 pc. incl. reduction rings for 1 inch and 7/8 inchNote: Without homologation.Use the HIGHSIDER sealing caps to close any holes for mounting the original handlebar mirrors: Article 160-314.
Replacement mounting kit for HIGHSIDER handlebar end weights EVO and handlebar end mirror EVOReplacement mounting set for HIGHSIDER handlebar end weights EVO (item no. 161-032 and 161-033) and handlebar end mirrors EVO (item no. 301-019, 301-026, 301-784). Suitable for handlebars with an inner diameter of 12 to 22 mm. All our handlebar end mirrors (hanging mirrors) with a diameter of 1 inch (25.4 mm) can be attached to the handlebar weight.Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions: Diameter: 25.4 mm Length: 28 mmWeight with attachments: approx. 75 gScope of delivery: 1 pair, contains:2 x clamping sleeves D. 12 mm and D. 16 mm each2 x centering sleeves each type 1, type 2, type 32 x each M6 central screw, toothed washer and M6 conical nut
HIGHSIDER ENTERPRISE-EP1 handlebar weightsUniversal fit for all handlebars with an inner diameter of 12 to 22 mm - therefore for most 7/8 inch and 1 inch aluminum or steel handlebars. The perfect mount for all HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamping. The handlebar weights can of course also be used without a handlebar end mirror and can be adapted to the look of your bike, for example with one of the optionally available color rings. Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. DimensionsHandlebar weightDiameter: 34.5 mm Width: 14.5 mmMount for mirrorDiameter: 29.8 mmWidth: 12 mmScope of delivery:2 x handlebar weights2 clamping sleeves each with 12 and 16 mm Ø2 spacer sleeves each with 14, 18 and 21 mm Ø2 x M6 central bolt2 x M6 cone nutCan be ordered optionally:Color ring for handlebar weights (see accessories)Note:Please check the dimensions for accuracy of fit before purchasing
HIGHSIDER color ring for handlebar weights- Styling for your bike -The colour ring, made of the finest anodized aluminium, allows you to customize your bike in detail if you are already using a HIGHSIDER handlebar weight.You can use the color ring instead of a handlebar end mirror and thus upgrade your bike.It is simply slid over the handlebar end and secured with the grub screw on the ring.If you want to switch back to the HIGHSIDER handlebar end mirrors, you can do so in just a few simple steps.Scope of delivery: 1 pair
HIGHSIDER WAVE handlebar weightsUniversal fit for handlebars with an inner diameter of 12 to 22 mm - therefore for most 7/8 inch and 1 inch aluminum or steel handlebars. All HIGHSIDER and SHIN YO hanging handlebar end mirrors with external clamps can be attached to the handlebar weights.Tailor-made for your bike - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes. Dimensions:Handlebar weight: Ø 34.5 mm Width: 18 mmMount for mirror: Ø = 29.80 mmMount for mirror: width = 12 mm Please check the dimensions for accuracy of fit before purchasing!Scope of delivery: 1 pair, contains:2 x handlebar weights each2 x clamping sleeve Ø 12 and 16 mm each2 spacer sleeves each with Ø 14, 18 and 21 mm2 x M6 central bolt2 x M6 cone nutNote:The handlebar weight can also be used without a handlebar end mirror and can be adapted to the look of your bike using one of the 4 different color rings.
HIGHSIDER AKRON-LS handlebar weights, black with cap in various colors - Styling for your bike - With these elegantly designed handlebar ends with handlebar end mirror mount, you can customize your bike in detail according to your ideas. These end pieces serve as mounts for all HIGHSIDER & SHIN YO handlebar end mirrors with external handlebar clamps. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory TIP: Excellent in combination with the visually coordinated AKRON designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. If you do want to switch back to handlebar mirrors, you can use the optionally available color rings instead of a handlebar end mirror in just a few simple steps and thus set additional color accents. The color rings are simply slid over the handlebar end and fastened with the grub screw on the ring. Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 29 mm Mount for mirror: Ø 29.90 mm, width: 12 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central screws 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER AKRON-XL handlebar weights - Styling for your bike -With these elegantly designed handlebar ends, you can customize your bike in detail according to your ideas. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm.Our accessory TIP:Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher.Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 34 mm Scope of delivery: 1 pair incl.2 clamping sleeves each with D. 12 mm and D. 16 mm2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm2 x M6 central screws2 x M6 conical nutsNOTE:For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar.Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
HIGHSIDER AKRON-XS motorcycle handlebar weights - Styling for your bike - With these elegantly designed handlebar ends, you can customize your bike in detail according to your ideas. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to the clamping system with various sleeves, they are universally suitable for 7/8 (Ø22 mm), 1 inch (Ø25.4 mm) or X-Bar (Ø28.6 mm) tubular handlebars with an inner diameter of 12 to 22 mm. Our accessory TIP: Excellent in combination with the visually coordinated designer handlebar grips from our own company. The caps of the handlebar ends mirror the design of the grip rubbers and turn your motorcycle cockpit into an eye-catcher. Precisely coordinated - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality and functionality, you can easily customize your bike according to your wishes.Dimensions:Handlebar weight Ø: 37.4 mm Width: 17 mm Scope of delivery: 1 pair incl. 2 clamping sleeves each with D. 12 mm and D. 16 mm 2 spacer sleeves each with D. 14 mm, D. 18 mm and D. 21 mm 2 x M6 central screws 2 x M6 conical nuts NOTE: For handlebar ends with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Handlebar ends do not have to be approved and therefore do not require any test marks, certificates or ABEs.
Not for use in road traffic! For show and racing purposes only!No ABE!SHIN YO FERRARA universal mirror blackHandlebar mirror made of aluminum with an oval head. A joint on the mirror arm offers additional adjustment options for the best rear view. Suitable for the left and right side. Includes an extra adapter with an M10 x 1.25 mm left-hand thread for Yamaha.DimensionsHead width: 120 mmHead height: 60 mmStem length, head to joint: 150 mmHandle length, joint to threaded bolt: 30 mmThreaded bolt: M10 x 1.25 mm Scope of delivery: 1 pieceNote: Without homologation
Not for use in road traffic! For show and racing purposes only!No ABE!SHIN YO FERRARA Universal mirror, chrome-platedHandlebar mirror made of aluminum with an oval head. A joint on the mirror arm offers additional adjustment options for the best rear view. Suitable for the left and right side. Includes an extra adapter with an M10 x 1.25 mm left-hand thread for Yamaha.DimensionsHead width: 120 mmHead height: 60 mmStem length, head to joint: 150 mmHandle length, joint to threaded bolt: 30 mmThreaded bolt: M10 x 1.25 mm Scope of delivery: 1 pieceNote: Without homologation
Nicht zur Verwendung im Straßenverkehr! Nur für Show und Racing Zwecke!Keine ABE!HIGHSIDER CNC-gefräster Aluspiegel ACTIONHochwertig verarbeiteter, CNC-gefräster Spiegel in rechteckiger Form, Kopf aus Aluminium, mit verstellbarem Stiel.Dank der Verwendung eines zweiten Gelenks am Stiel ergeben sich zusätzliche Einstellmöglichkeiten für Ihre Sicherheit.Umsicht mit Stil – ob klassisch oder modern. Die HIGHSIDER-Spiegel-Serien zeichnen sich durch markantes Design und aerodynamische Funktion aus. So behältst du den Überblick.Inklusive extra Adapter M10 x 1,25 mm mit Linksgewinde für Yamaha. Für linke und rechte Seite verwendbar.Maße:Breite, Kopf: 120 mmHöhe, Kopf: 48 mmLänge, Arm bis zum Gelenk: 140 mm Länge, Arm bis zum Gewindebolzen: 170 mm Lieferumfang: 1 StückHinweis: ohne E-Prüfzeichen
Nicht zur Verwendung im Straßenverkehr! Nur für Show und Racing Zwecke!Keine ABE!HIGHSIDER CNC-gefräster Aluspiegel ACTIONHochwertig verarbeiteter, CNC-gefräster Spiegel in rechteckiger Form, Kopf aus Aluminium, mit verstellbarem Stiel.Dank der Verwendung eines zweiten Gelenks am Stiel ergeben sich zusätzliche Einstellmöglichkeiten für Ihre Sicherheit.Umsicht mit Stil – ob klassisch oder modern. Die HIGHSIDER-Spiegel-Serien zeichnen sich durch markantes Design und aerodynamische Funktion aus. So behältst du den Überblick.Inklusive extra Adapter M10 x 1,25 mm mit Linksgewinde für Yamaha. Für linke und rechte Seite verwendbar.Maße:Breite, Kopf: 120 mmHöhe, Kopf: 48 mmLänge, Arm bis zum Gelenk: 140 mm Länge, Arm bis zum Gewindebolzen: 170 mm Lieferumfang: 1 StückHinweis: ohne E-Prüfzeichen
HIGHSIDER STEALTH-RIM X7 handlebar end mirror with integrated LED blinker in the mirror arm, E-approved Proven without changing the character of the mirror. According to this the creative minds at HIGHSIDER followed this motto. Modern, progressive - that are the rear-view mirrors in the STEALTH series. As with its predecessor, the mirror is the mirror is made of high-quality materials that are perfectly as usual. The new details of the refreshed product only become apparent only become apparent at second glance. The bar end system has been given a more and is designed for an even more individual appearance, optionally with the Design Cap1 (304-231) from the same company. The revised mirror arm design with fully recessed blinker now stands out even more even more confidently in the wind. The matt black, anodized aluminium, finely bead-blasted, underlines the high-quality look.Dimensions: A Head width: 119 mmB Height head: 90 mmC Total width: 120 mmD Total height: 200 mmConnections: Black cable (-) Yellow cable (+)Cable length: 1000 mm Scope of delivery: 1 piece Tip: - Use the HIGHSIDER caps to close any holes for attaching the original handlebar mirrors. - Option to mount HIGHSIDER DESIGN Cap1 for an even more individual appearance. (Not included in the scope of delivery) Notes: - Only suitable for suspended mounting. - 2 mirrors must always be installed, as indicators are integrated.
HIGHSIDER VICTORY-X RIM handlebar end mirror with LED indicators in the mirror arm, for handlebar inner diameters from 12-22 mm, i.e. for most most 7/8 and 1 inch aluminum or steel handlebars, - with improved clamping system. E-approved, one piece (successor to 301-182)Dimensions: A Width head: 117 mmB Height head: 83 mmC Total width: 120 mmD Overall height: 195 mmConnections: Black cable (-) Yellow cable (+) Cable length: 1000 mm Scope of delivery: 1 piece Tip: - Use the HIGHSIDER caps to close any holes for attaching the original handlebar mirrors. - Option to mount HIGHSIDER DESIGN Cap1 for an even more individual appearance. (Not included in the scope of delivery)
HIGHSIDER handlebar weights CLASSICHandlebar weights made of chrome-plated or black aluminum. Universal fit for handlebars with inner diameters from 12 to 22 mm - suitable for most 7/8 inch and 1 inch aluminum or steel handlebars. The elegant chrome-plated or black surface and design language are optimized for classic bikes.Your bike - your project: Turn your classic bike into an aesthetic style icon with our CLASSIC series! Inspired by the classic rounded shapes of the 1960s and 1970s, we have developed a completely new design that gives your bike character.Dimensions Diameter: 35 mm Length: 15 mmThread M6 x 1.25 mmPlease check the dimensions for accuracy of fit before purchasing!Scope of delivery:2 x handlebar weights each.2 x clamping sleeves D. 12 mm and D. 16 mm each.2 x centering sleeves each type 1, type 2, type 3.2 x each M6 central bolt and M6 cone nut.Your bike - your project: Use CONERO products to make your classic bike an individual highlight - with classic, rounded shapes to create an aesthetic style icon! Further accessories from the CLASSIC series- Item no. 161-060 CLASSIC, handlebar weights, black- Item no. 301-006 CLASSIC, handlebar mirror, aluminum, black- Part no. 301-007 CLASSIC, handlebar mirror, aluminum, chrome- Part no. 301-008 CLASSIC, handlebar end mirror, aluminum, black- Part no. 301-009 CLASSIC, handlebar end mirror, aluminum, chrome- Part no. 204-340 ROCKET module, LED blinker for installation, black, tinted- Part no. 204-341 ROCKET module, LED blinker / position light for installation, black, tinted- Part no. 254-340 ROCKET module, LED rear light / blinker for installation, black, tinted- Part no. 255-340 ROCKET module, LED tail light for installation, black, tinted- Part no. 204-342 ROCKET CLASSIC, LED blinker, black, tinted- Part no. 204-343 ROCKET CLASSIC, LED blinker, chrome, tinted- Part no. 204-344 ROCKET CLASSIC, LED blinker / position light, black, tinted- Part no. 204-345 ROCKET CLASSIC, LED blinker / position light, chrome, tinted- Part no. 254-342 ROCKET CLASSIC, LED rear light / blinker, black, tinted- Part no. 254-343 ROCKET CLASSIC, LED rear light / blinker, chrome, tinted- Part no. 255-342 ROCKET CLASSIC, LED rear light, black, tinted- Part no. 255-343 ROCKET CLASSIC, LED rear light, chrome, tinted- Part no. 204-346 ROCKET BULLET, LED blinker, black, tinted- Part no. 204-347 ROCKET BULLET, LED blinker, chrome, tinted- Part no. 204-348 ROCKET BULLET, LED blinker / position light, black, tinted- Part no. 204-349 ROCKET BULLET, LED blinker / position light, chrome, tinted- Part no. 254-346 ROCKET BULLET, LED blinker / position light, black, tinted- Part no. 254-347 ROCKET BULLET, LED rear light / blinker, chrome, tinted- Part no. 204-176 APOLLO CLASSIC, LED blinker, black, tinted- Part no. 204-177 APOLLO CLASSIC, LED blinker, chrome, tinted- Part no. 204-178 APOLLO CLASSIC, LED blinker / position light, black, tinted- Part no. 204-179 APOLLO CLASSIC, LED blinker / position light, chrome, tinted- Part no. 254-171 APOLLO BULLET, LED rear light / blinker, chrome, tinted- Part no. 254-176 APOLLO CLASSIC, LED rear light / blinker, black, tinted- Part no. 254-177 APOLLO CLASSIC, LED rear light / blinker, chrome, tintedOptionally available:- Item no. 161-034 Replacement attachment set- Part no. 161-037 Handlebar adapter for BMW R nine T