ABE (general operating permit) including marking for Highway Hawk passenger floorboards, various Honda, Kawasaki

Highway Hawk ABE (general operating permit) including markingfor passenger floorboards:Honda VT 1100 Shadow / SC23Kawasaki VN 900 Classic / VN900B Kawasaki VN 900 Custom / VN900C Kawasaki VN 1500 Mean Streak / VNT50P Kawasaki VN 1600 Mean Streak / VNT60A Suzuki VZ 1600 Marauder / VNT60B Kawasaki VN 1500 Classic / VNT50D, VNT50N Kawasaki VN 1700 Classic / VNT70E Kawasaki VN 2000 Classic / VNW00HThe ABE (general operating permit) is valid for all Highway Hawk passenger floorboards of the types: "Standard", "New Tech Glide" and "Smooth" of the listed models.This offer refers to Highway Hawk floorboards that are already installed and in the market.You can order the ABE (general operating permit) and send us your Highway Hawk passenger floorboards including the brackets. Upon receipt of your floorboards, we will re-mark them (by laser inscription) and include the associated ABE.For all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.

Product number: KZ MB06-1270-2

Manufacturer: Burchard Excellence

€79.00*

Exhaust system Falcon "Double Groove" Kawasaki VN 900 Custom and Classic with EG-BE

Falcon Double Groove exhaust system with cat and E-mark (EG-BG)ForKawasaki VN 900 Custom / VN900CKawasaki VN 900 Classic / VN900BThe exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of stainless steel and high-gloss polished. The outer diameter is approx. 60 mm. The conversion to the Falcon Double Groove exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 and 3 are sample images of a mounted double groove exhaust system on a Kawasaki.Supplied with:- Falcon Double Groove exhaust system- Mounting instructions- EG-BG documents

Product number: FALCON65240310

Manufacturer: Falcon

€1,349.95*

Highway Hawk Sissy Bar "Wide" for Kawasaki VN 900 Custom - Classic- average height from fender 400 mm high in black - complete with brackets

Sissy bar "Wide" in blackfor Kawasaki VN 900 Custom / VN900C Kawasaki VN 900 Classic / VN900BAverage height from fender approx. 400 mm highComplete with brackets and comfortable backrest.The sissy bar is attached to the original frame fix points.Suitable Solo Rack: H525-0031BAll accessories required for assembly are included.Included: 1x backrest Wide 1x set of brackets for sissy bar

Product number: H524-1039B

Manufacturer: Highway Hawk

€199.95*

Motorbike Seat Soloseat for Kawasaki VN 900 Custom

Sitzbankbezug: Kunstleder Schwarz | Sitzbankmuster: 03 Rhomb Large | Steppfaden: Thread Black

"Made in Germany"Motorbike Seat SoloseatforKawasaki VN 900 Custom / VN900CThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The seat are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 13 "Flammen"

Product number: MB04-2121 4-03

Manufacturer: Burchard Excellence

€439.00*

ABE (general operating permit) including marking for Highway Hawk driver floorboards, Kawasaki VN 900 Custom

Highway Hawk ABE (general operating permit) including markingfor driver floorboards:Kawasaki VN 900 Custom / VN900CThe ABE (general operating permit) is valid for all Highway Hawk rider floorboards of the types: "Standard", "New Tech Glide" and "Smooth" of the listed models.This offer refers to Highway Hawk floorboards that are already installed and in the market.You can order the ABE (general operating permit) and send us your Highway Hawk rider floorboards including the brackets. Upon receipt of your floorboards, we will re-mark them (by laser inscription) and include the associated ABE.For all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.

Product number: KZ MB06-2120-1

Manufacturer: Burchard Excellence

€79.00*

Motorbike Seat for tail conversion Soloseat for Kawasaki VN 900 Classic - Custom

Sitzbankbezug: Kunstleder Schwarz | Sitzbankmuster: 00301 Tribal | Steppfaden: Thread Black

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforKawasaki VN 900 Custom - Classic / VN900C - VN900BFor our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

Product number: MB04-2120 7-00301

Manufacturer: Burchard Excellence

Variants from €409.00*

€427.00*

Felge / 6.00x15 / VN 900 Cl. / VN900B / R

Surface: Steel raw

Rim Ring 6.00x15 " for rear with TÜV Test Report §19/3forKawasaki VN 900 Classic / VN900BFor the conversion to a wide rear wheel we offer a 6.00x15" Rim Ring.With the rim ring you can drive a 200mm rear tyre.The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard.The original Spoke Set no longer fits.Additional Information:When using the Tire Wide Metzeler 200/70 B 15 M/C ME 880 Marathon some changes (rear or swingarm) are required. You can read the required changes in the categories.Included in the delivery:1 x Rim ring 6.00x15 " with TÜV Test Report §19/3

Product number: MB99-2120R

Manufacturer: Burchard Excellence

€999.00*

SMLP / VN 900 Cu. u. Cl. / 240x130 / SM

License plate size: 240mm x 130mm France | Surface: Black Dull

"Made in Germany"Side mount license plate holder with TÜV Test Report § 19/3forKawasaki VN 900 Custom / VN900CKawasaki VN 900 Classic / VN900BThe side mount license plate holder is supplied pre-assembled with all parts required for assembly.Our side mount license plate holder are made of steel and are available in high-gloss chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the side mount license plate holder are galvanically nickel-plated before powder coating.All side mount license plate holder are supplied with a black LED light.The LED light has an e-mark and is also listed in the TÜV Test Report.The side mount license plate holder is supplied with a TÜV Test Report § 19/3, an assembly instruction and a pats list. All removable parts are available as spare parts.

Product number: MB20-2120SM-240-130L

Manufacturer: Burchard Excellence

€299.00*

Motorbike Seat with step for Kawasaki VN 900 Custom

Sitzbankbezug: Kunstleder Schwarz | Sitzbankmuster: 08 Tuc and Roll | Steppfaden: Thread Black

"Made in Germany"Motorbike Seat with stepforKawasaki VN 900 Custom / VN900CThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 00 "Glatt"

Product number: MB04-2121 2-08

Manufacturer: Burchard Excellence

€499.00*

Lowering Kits For Shock Absorbers Kawasaki VN 900 Classic - Classic TÜV

Shock absorber lowering with TÜV Test Report §19/3 for Kawasaki VN 900 Classic - Custom / VN900B, VN900C By the conversion the motorcycle is lowered by approx. 4,7 cm (measured above the rear wheel centre) The change of the original shock absorbers is a real price alternative to new shock absorbers. The original shock absorbers must be sent to us for conversion. In addition to the postage costs, no further installation costs are incurred. The shock absorbers are lowered by us and provided with a new serial number.

Product number: MB00-2120

Manufacturer: Burchard Excellence

€229.00*

Motorbike Seat Hard Rider for Kawasaki VN 900 Custom

Sitzbankbezug: Kunstleder Schwarz | Sitzbankmuster: 14 Spider | Steppfaden: Thread Black

"Made in Germany"Motorbike Seat Hard RiderforKawasaki VN 900 Custom / VN900CThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 00 "Glatt"

Product number: MB04-2121 1-14

Manufacturer: Burchard Excellence

€479.00*

VFA / VN 900 B, C / VN900B, C / 17 cm / gefr. / S / S

Footpegs and Levers Design: Sundance Look milled levers | Surface: Black Glossy

"Made in Germany"Forward Controls Kit with German ABE17 cm forwardforKawasaki VN 900 Classic / VN900BKawasaki VN 900 Custom / VN900CThe Forward Controls Kit is delivered pre-mounted with all parts required for assembly, for example with an extended brake line (if necessary).The Forward Controls Kit fixed on the original frame points.Our Forward Controls Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Forward Controls Kit are galvanically nickel-plated before powder coating.All Motorrad Burchard Forward Control Kits are supplied with a 2-year warranty on processing and chromium plating. Shift- and Brakeleversare fitted by hand and provided with grease nipples. The connecting parts (ball joints) on the shift and brakerods are free of charge and also equipped with grease nipples. This quality standard provides a minimum of play on/off the waves and a maximum oflifetime.The Forward Control Kit deliverd with a ABE from Kraftfahrt-Bundesamt, a mounting instruction and a parts list. All removable parts are available as spare parts.The Forward Controls Kit is available in 4 different designs.

Product number: MB01-2120GS

Manufacturer: Burchard Excellence

Variants from €1,000.00*

€1,079.99*

Pillion Pad for Kawasaki VN 900 Custom

Sitzbankbezug: Kunstleder Schwarz | Sitzbankmuster: 00201 Iron Cross | Steppfaden: Thread Black

"Made in Germany"Pillion Pad forKawasaki VN 900 Custom / VN900CThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 13 "Flammen"

Product number: MB04-2121 6-00201

Manufacturer: Burchard Excellence

Variants from €220.00*

€230.00*

Only 4 available

Heckteil / VN 900 Cu. u. Cl. / VN900B, C / R

Surface: Steel raw

Fender Struts (1 Set) with TÜV Test Reports §19/3 for Kawasaki VN 900 Classic - Custom / VN900B, VN900C Attention: The rear part struts are attached to supplied mounting blocks. This requires welding work on the frame. The original rear section struts must be shortened. On request, we can provide you with a welding apprenticeship.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard. When using the rear fender struts we recommend the shock absorber lowering of Motorrad Burchard. The rear fender change is absolutely necessary when using the 6.00x15 " Rim ring. Turnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes. Included in the delivery: 1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3

Product number: MB11-2120R

Manufacturer: Burchard Excellence

€419.00*

Only 1 available

Highway Hawk Idle cable steel braided + 40 cm Kawasaki VN 900 Custom

Steelbreaded Idle Cable + 40 cm longer to the original length (1 Piece) for Kawasaki VN 900 Custom / VN900C The steelbreaded idle cable is exchanged for the original idle cable. The lenght (only covering without core) is about 128 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-02405

Manufacturer: Highway Hawk

€98.31*

Only 1 available

Highway Hawk Idle cable steel braided + 15 cm Kawasaki VN 900 Custom

Steelbreaded Idle Cable + 15 cm longer to the original length (1 Piece)for Kawasaki VN 900 Custom / VN900CThe steelbreaded idle cable is exchanged for the original idle cable.The lenght (only covering without core) is about 103 cm.The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture.1 steelbreaded throttle cable is included in the delivery.We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-02404

Manufacturer: Highway Hawk

€92.95*

Only 2 available

Spoke Set for 6.00x15" rear wheel Kawasaki VN 900 Classic

Stainless steel Spoke Set for 6.00x15" rear wheelforKawasaki VN 900 Classic / VN900BThe Spoke Set is used for the conversion to a 6.00 x15" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.

Product number: MB98-2120

Manufacturer: Burchard Excellence

€253.51*

Only 2 available

Highway Hawk Throttle cable steel braided + 15 cm Kawasaki VN 900 Custom

Steelbreaded Throttle Cable + 15 cm longer to the original length (1 Piece) for Kawasaki VN 900 Custom / VN900C The steelbreaded throttle is exchanged for the original throttle. The lenght (only covering without core) is about 104 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-02401

Manufacturer: Highway Hawk

€99.38*

Only 2 available

Highway Hawk Idle cable steel braided original length Kawasaki VN 900 Custom

Steelbreaded Idle Cable In original length (1 Piece) for Kawasaki VN 900 Custom / VN900C The steelbreaded idle cable is exchanged for the original idle cable. The lenght (only covering without core) is about 89 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded idle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-02403

Manufacturer: Highway Hawk

€89.75*

Only 3 available

Highway Hawk Clutch cable steel braided original length Kawasaki VN 900 Custom

Steelbreaded Clutch Cable In original length (1 Piece) for Kawasaki VN 900 Custom / VN900C The steelbreaded clutch cable is exchanged for the original clutch cable. The lenght (only covering without core) is about 141 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded clutch cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0263

Manufacturer: Highway Hawk

€86.55*

Only 4 available

Highway Hawk Clutch cable steel braided + 40 cm Kawasaki VN 900 Custom

Steelbreaded Clutch Cable + 40 cm longer to the original length (1 Piece) for Kawasaki VN 900 Custom / VN900C The steelbreaded clutch cable is exchanged for the original clutch cable. The lenght (only covering without core) is about 179 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded clutch cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0265

Manufacturer: Highway Hawk

€94.02*

Only 5 available

Highway Hawk Sissy Bar "Arch" for Kawasaki VN 900 Custom - Classic- average height from fender 400 mm high in black - complete with brackets

Sissy bar "Arch" in blackfor Kawasaki VN 900 Custom / VN900C Kawasaki VN 900 Classic / VN900BAverage height from fender approx. 400 mm highComplete with brackets and comfortable backrest.The sissy bar is attached to the original frame fix points.Suitable Solo Rack: H525-0031BAll accessories required for assembly are included.Included: 1x backrest Arch1x set of brackets for sissy bar

Product number: H524-3039B

Manufacturer: Highway Hawk

€219.95*

Only 6 available

Highway Hawk Floorboard Set for rider "Smooth" black Kawasaki VN 900 Custom with ABE

Floorboard Set for rider black with ABE (general operating permit)Design "Smooth" for Kawasaki VN 900 Custom / VN900C The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 27.5 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Product number: H734-852B

Manufacturer: Highway Hawk

€486.26*

Only 6 available

Highway Hawk Floorboard Set for passenger "Smooth" black Honda VT 1100 Shadow - Kawasaki VN 900 - VN 1500 - VN 1600 - VN 1700 - VN 2000 - Suzuki VZ 1600 with ABE

Floorboard Set for passenger black with ABE (general operating permit)Design "Smooth" for Honda VT 1100 Shadow / SC18 - SC23 Kawasaki VN 900 Custom / VN900B Kawasaki VN 900 Classic / VN900C Kawasaki VN 1500 Classic / VNT50D - VNT50N Kawasaki VN 1500 Mean Streak / VNT50PKawasaki VN 1600 Mean Streak / VNT60B Kawasaki VN 1700 Classic / VNT70E Kawasaki VN 2000 Classic Suzuki VZ 1600 Marauder / VNT60B The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 27.5 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Product number: H734-750B

Manufacturer: Highway Hawk

€394.18*

Only 7 available

Highway Hawk Sissy Bar brackets in black suitable for Kawasaki VN 900 Custom - VN 900 Classic 524-1039B/2039B/3039B/4039B/6039B

Brackets in blackfor Kawasaki VN 900 Custom / VN900C Kawasaki VN 900 Classic / VN900B Suitable for Sissy Bars 524-1039B/2039B/3039B/4039B/6039B The scope of delivery only includes the brackets, the backrest must be ordered separately. The pictures are vehicle-related and can deviate from the picture (example image).

Product number: H524-1039AB

Manufacturer: Highway Hawk

€97.48*

Only 7 available

Highway Hawk Throttle cable steel braided + 40 cm Kawasaki VN 900 Custom

Steelbreaded Throttle Cable + 40 cm longer to the original length (1 Piece) for Kawasaki VN 900 Custom / VN900C The steelbreaded throttle is exchanged for the original throttle. The lenght (only covering without core) is about 129 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-02402

Manufacturer: Highway Hawk

€103.65*

Only 7 available

Highway Hawk Floorboard Set for passenger "New Tech Glide Metal" black Honda VT 1100 Shadow - Kawasaki VN 900 - VN 1500 - VN 1600 - VN 1700 - VN 2000 - Suzuki VZ 1600 with ABE

Floorboard Set for passenger black with ABE (general operating permit)Design "New Tech Glide Metal" for Honda VT 1100 Shadow / SC18 - SC23Kawasaki VN 900 Custom / VN900B Kawasaki VN 900 Classic / VN900C Kawasaki VN 1500 Classic / VNT50D - VNT50N Kawasaki VN 1500 Mean Streak / VNT50P Kawasaki VN 1600 Mean Streak / VNT60B Kawasaki VN 1700 Classic / VNT70E Kawasaki VN 2000 Classic Suzuki VZ 1600 Marauder / VNT60B The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 27.5 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Product number: H734-700M

Manufacturer: Highway Hawk

€376.72*

Only 7 available

Highway Hawk Floorboard Set for rider "New Tech Glide Metal" black Kawasaki VN 900 Custom with ABE

Floorboard Set for rider black with ABE (general operating permit)Design "New Tech Glide Metal" for Kawasaki VN 900 Custom / VN900C The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: ength: approx. 27.5 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Product number: H734-802M

Manufacturer: Highway Hawk

€468.81*

Only 9 available

Highway Hawk Throttle cable steel braided original length Kawasaki VN 900 Custom

Steelbreaded Throttle Cable In original length (1 Piece) for Kawasaki VN 900 Custom / VN900C The steelbreaded throttle is exchanged for the original throttle. The lenght (only covering without core) is about 88 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-02400

Manufacturer: Highway Hawk

€96.16*

Only 10 available

Highway Hawk Clutch cable steel braided + 15 cm Kawasaki VN 900 Custom

Steelbreaded Clutch Cable + 15 cm longer to the original length (1 Piece) for Kawasaki VN 900 Custom / VN900C The steelbreaded clutch cable is exchanged for the original clutch cable. The lenght (only covering without core) is about 155 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded clutch cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Product number: H20-0264

Manufacturer: Highway Hawk

€89.75*

Highway Hawk Footpegs rider (1 Set) "Smooth" Kawasaki EN 500, Kawasaki VN 800 - 900 - 1500 - 1600

Footpegs rider (1 Set) "Smooth"for Suzuki VZ 1600 Marauder / VNT60B Kawasaki EN 500 Kawasaki VN 750 Vulcan Kawasaki VN 800 Vulcan, Classic Kawasaki VN 900 Custom Kawasaki VN 1500 Vulcan, SE Kawasaki VN 1500 Mean Streak Kawasaki VN 1600 Mean Streak All accessories required for assembly are included in the scope of delivery. If you have any questions about the product, please contact us by phone

Product number: H734-381

Manufacturer: Highway Hawk

€130.25*

Highway Hawk Fat Bar 38 mm for Kawasaki VN 900 Custom - Classic chrome

Fat Bar 38 mm chromeforKawasaki VN 900 Custom / VN900C Kawasaki VN 900 Classic / VN900B All assembly materials required for assembly are included. The pictures for the fat bar are vehicle-related and can deviate from the picture (example image for the design). Please note that the fat bar is only combinable with the original equipment.

Product number: H594-018

Manufacturer: Highway Hawk

€179.95*

Highway Hawk Floorboard Set for rider "Smooth" chrome Kawasaki VN 900 Custom with ABE

Floorboard Set for rider chrome with ABE (general operating permit)Design "Smooth" for Kawasaki VN 900 Custom / VN900C The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 27.5 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:Running boardsBrackets

Product number: H734-852

Manufacturer: Highway Hawk

€518.17*

Highway Hawk Floorboard Set for passenger "Smooth" chrome Honda VT 1100 Shadow - Kawasaki VN 900 - VN 1500 - VN 1600 - VN 1700 - VN 2000 - Suzuki VZ 1600 with ABE

Floorboard Set for passenger chrome with ABE (general operating permit)Design "Smooth" for Honda VT 1100 Shadow / SC18 - SC23 Kawasaki VN 900 Custom / VN900B Kawasaki VN 900 Classic / VN900C Kawasaki VN 1500 Classic / VNT50D - VNT50N Kawasaki VN 1500 Mean Streak / VNT50P Kawasaki VN 1600 Mean Streak / VNT60B Kawasaki VN 1700 Classic / VNT70E Kawasaki VN 2000 ClassicSuzuki VZ 1600 Marauder / VNT60B The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 27.5 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Product number: H734-750

Manufacturer: Highway Hawk

€426.08*

Highway Hawk Footpegs rider(1 Set) "Tech Glide" Kawasaki EN 500, Kawasaki VN 800 - 900 - 1500 - 1600

Footpegs rider (1 Set) "Tech Glide"for Suzuki VZ 1600 Marauder / VNT60B Kawasaki EN 500 Kawasaki VN 750 Vulcan Kawasaki VN 800 Vulcan, Classic Kawasaki VN 900 Custom Kawasaki VN 1500 Vulcan, SE Kawasaki VN 1500 Mean StreakKawasaki VN 1600 Mean Streak All accessories required for assembly are included in the scope of delivery.Included in delivery: 1 set

Product number: H734-600

Manufacturer: Highway Hawk

€122.26*

Highway Hawk Footpegs passenger "Tech Glide" Kawasaki VN 800 Vulcan - Classic - VN 900 Custom - Classic - VN 1500 - VN 1600 - VN 1700 - VN 2000 (1 Set)

Footpegs passenger "Tech Glide"for Kawasaki VN 800 Vulcan - Classic / VN800A - VN800B Kawasaki VN 900 Custom - Classic / VN900C - VN900B Kawasaki VN 1500 SE - Vulcan / VNT50A Kawasaki VN 1500 Classic / VNT50D - VNT50N Kawasaki VN 1500 Mean Streak / VNT50P Kawasaki VN 1600 Mean Streak / VNT60b Kawasaki VN 1600 Classic / VNT60A Kawasaki VN 1700 Classic / VNT70E Kawasaki VN 2000 Classic Suzuki VZ 1600 Marauder / VNT60B The footrests are replaced with the original pillion footrests. All mounting materials required for assembly are supplied.The receptacles for the footrests are vehicle-related and may differ from the image (example image for the design).Included in delivery:1 set

Product number: H734-605

Manufacturer: Highway Hawk

€122.26*

Highway Hawk Fat Bar 38 mm for Kawasaki VN 900 Custom - Classic dull black

Fat Bar 38 mm dull blackfor Kawasaki VN 900 Custom / VN900C Kawasaki VN 900 Classic / VN900B All assembly materials required for assembly are included. The pictures for the fat bar are vehicle-related and can deviate from the picture (example image for the design). Please note that the fat bar is only combinable with the original equipment.

Product number: H594-018B

Manufacturer: Highway Hawk

€179.95*

Highway Hawk "Knuckle" Lever Set (1 pair) Kawasaki VN 800, VN 900, VN 2000 Suzuki VZ 800 Marauder

"Knuckle" Lever Set (1 pair) chromefor Kawasaki VN 800 / VN800A und VN800B Kawasaki VN 900 / VN900B und VN900C Kawasaki VN 2000 Classic / alle Modelle Suzuki VZ 800 Marauder / AF The "Knuckle" lever set are exchanged for the original levers. All assembly materials required for assembly are included.

Product number: H453-301

Manufacturer: Highway Hawk

€159.85*

Highway Hawk Footpegs passenger (1 Set) "Smooth" Kawasaki VN 800 Vulcan - Classic - VN 900 Custom - Classic - VN 1500 - VN 1600 - VN 1700 - VN 2000

Footpegs passenger (1 Set) "Smooth"for Kawasaki VN 800 Vulcan - Classic / VN800A - VN800B Kawasaki VN 900 Custom - Classic / VN900C - VN900B Kawasaki VN 1500 SE - Vulcan / VNT50A Kawasaki VN 1500 Classic / VNT50D - VNT50N Kawasaki VN 1500 Mean Streak / VNT50P Kawasaki VN 1600 Mean Streak / VNT60b Kawasaki VN 1600 Classic / VNT60A Kawasaki VN 1700 Classic / VNT70E Kawasaki VN 2000 ClassicSuzuki VZ 1600 Marauder / VNT60B All accessories required for assembly are included in the scope of delivery. If you have any questions about the product, please contact us by phone.

Product number: H734-390

Manufacturer: Highway Hawk

€130.25*

Highway Hawk Floorboard Set for rider "New Tech Glide" black Kawasaki VN 900 Custom with ABE

Floorboard Set for rider black with ABE (general operating permit)Design "New Tech Glide"forKawasaki VN 900 Custom / VN900CThe floorboards are exchanged for the original footpegs.All materials required for assembly are included.The floorboard holder is vehicle-related and can deviate from the image (sample image for the design).The dimensions of the floorboards:Length: approx. 27.5 cmWidth: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Product number: H734-802B

Manufacturer: Highway Hawk

€485.17*

Highway Hawk Floorboard Set for rider "New Tech Glide" chrome Kawasaki VN 900 Custom with ABE

Floorboard Set for rider chrome with ABE (general operating permit)Design "New Tech Glide"forKawasaki VN 900 Custom / VN900CThe floorboards are exchanged for the original footpegs.All materials required for assembly are included.The floorboard holder is vehicle-related and can deviate from the image (sample image for the design).The dimensions of the floorboards:Length: approx. 27.5 cmWidth: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Product number: H734-802

Manufacturer: Highway Hawk

€517.00*

Highway Hawk Floorboard Brackets Set for rider fits floorboard 73-700 and 73-750 for Kawasaki VN 900 Custom

Floorboard Bracket Set for rider fits floorboards 73-700 and 73-750for Kawasaki VN 900 Custom / VN900CThe illustration is exemplary, the brackets are delivered vehicle-specific.All mounting materials required for installation are supplied.

Product number: H734-802A

Manufacturer: Highway Hawk

€146.07*

Highway Hawk Floorboard Set for passenger "New Tech Glide" chrome Honda VT 1100 Shadow - Kawasaki VN 900 - VN 1500 - VN 1600 - VN 1700 - VN 2000 - Suzuki VZ 1600 with ABE

Floorboard Set for passenger chrome with ABE (general operating permit)Design "New Tech Glide"forHonda VT 1100 Shadow / SC18 - SC23Kawasaki VN 900 Custom / VN900BKawasaki VN 900 Classic / VN900CKawasaki VN 1500 Classic / VNT50D - VNT50NKawasaki VN 1500 Mean Streak / VNT50PKawasaki VN 1600 Mean Streak / VNT60BKawasaki VN 1700 Classic / VNT70EKawasaki VN 2000 ClassicSuzuki VZ 1600 Marauder / VNT60BThe floorboards are exchanged for the original footpegs.All materials required for assembly are included.The floorboard holder is vehicle-related and can deviate from the image (sample image for the design).The dimensions of the floorboards:Length: approx. 27.5 cmWidth: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Product number: H734-700

Manufacturer: Highway Hawk

€424.91*

Highway Hawk Saddlebag Support Kit Set chrome for Kawasaki VN 900 Custom - Classic

Saddlebag Support Kit Set chrome for Kawasaki VN 900 Custom - Classic / VN900C - VN900BThe saddlebag support kit are attached to the original retaining points on the fender. All parts required for assembly are included.Made of High Quality Chromed Steel Example image. The bracket are delivered in a vehicle-related and may deviate from the picture.

Product number: H664-031

Manufacturer: Highway Hawk

€67.82*

Highway Hawk Floorboard Set for passenger "New Tech Glide" black Honda VT 1100 Shadow - Kawasaki VN 900 - VN 1500 - VN 1600 - VN 1700 - VN 2000 - Suzuki VZ 1600 with ABE

Floorboard Set for passenger black with ABE (general operating permit)Design "New Tech Glide"forHonda VT 1100 Shadow / SC18 - SC23Kawasaki VN 900 Custom / VN900BKawasaki VN 900 Classic / VN900CKawasaki VN 1500 Classic / VNT50D - VNT50NKawasaki VN 1500 Mean Streak / VNT50PKawasaki VN 1600 Mean Streak / VNT60BKawasaki VN 1700 Classic / VNT70EKawasaki VN 2000 ClassicSuzuki VZ 1600 Marauder / VNT60BThe floorboards are exchanged for the original footpegs.All materials required for assembly are included.The floorboard holder is vehicle-related and can deviate from the image (sample image for the design).The dimensions of the floorboards:Length: approx. 27.5 cmWidth: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Product number: H734-700B

Manufacturer: Highway Hawk

€393.09*

Highway Hawk Mastercylindercover "Flame" Kawasaki VN 900, Kawasaki VN 1500/1600 MS, Kawasaki VN 1600, Kawasaki VN 2000, Suzuki VZ 1600 Marauder

Mastercylindercover "Flame"forKawasaki VN 900 Classic und Vulcan / VN900B VN900C Kawasaki VN 1500 Mean Streak / VNT50P Kawasaki VN 1600 Mean Streak / VNT60B Kawasaki VN 1600 Classic / VNT60A Kawasaki VN 2000, Suzuki VZ 1600 Marauder / VNT60B For older vehicles we recommend to buy a new original gasket from your dealer. There is no new gasket included. All assembly materials required for assembly are included.Included in delivery:1 piece

Product number: H454-034

Manufacturer: Highway Hawk

€45.76*

Highway Hawk Turn Signals Visors (1 Pair) "Plain" Kawasaki EN, Kawasaki W, Kawasaki VN

Turn Signals Visors "Plain"A packing unit contains two pieces each.The mounting is done by screws.All accessories required for assembly are included in the scope of delivery.Suitable for: Kawasaki EN 500 A / EN500A Kawasaki EN 500 C / EN500C Kawasaki W 650 Kawasaki VN 750 Vulcan / VN750A Kawasaki VN 800 Vulcan, Classic / VN800A, VN800B Kawasaki VN 900 Custom, Classic / VN900B, VN900C Kawasaki VN 1500 Vulcan, SE / VNT50A Kawasaki VN 1500 Drifter Kawasaki VN 1500 Classic / VNT50D, VNT50N Kawasaki VN 1500 Mean Streak / VNT50P Kawasaki VN 1600 Mean Streak / VNT60B

Product number: H664-051

Manufacturer: Highway Hawk

€32.07*

Highway Hawk Radiator cover chromed Kawasaki VN 900 Vulcan, Classic / VN900C, VN900B

Radiator Cover Chrome PlatedFor Kawasaki VN 900 Custom, classic/VN900C, VN900B All assembly materials required for assembly are included.

Product number: H714-6192

Manufacturer: Highway Hawk

€112.54*

Taillight Covers "New Tech Glide" for Kawasaki VN 900 Custom - Classic - Kawasaki VN 1500 Mean Streak - VN 1600 Mean Streak chrome

Taillight Covers "New Tech Glide" chromeforKawasaki VN 900 Custom / VN900CKawasaki VN 900 Classic / VN900CKawasaki VN 1500 Mean Streak / VNT50PKawasaki VN 1600 Mean Streak / VNT60BAll assembly materials required for assembly are included.The taillight cover is screwed onto the original taillight.

Product number: H664-116

Manufacturer: Highway Hawk

€29.92*

Highway Hawk Floorboard Brackets Set for passenger fits floorboard 73-700 and 73-750 for Honda VT 1100 Shadow - Kawasaki VN 900 - VN 1500 - VN 1600 - VN 1700 - VN 2000 - Suzuki VZ 1600

Floorboard Bracket Set for passenger fits floorboards 73-700 and 73-750for Honda VT 1100 Shadow / SC18 - SC23 Kawasaki VN 900 Custom / VN900B Kawasaki VN 900 Classic / VN900C Kawasaki VN 1500 Classic / VNT50D - VNT50N Kawasaki VN 1500 Mean Streak / VNT50P Kawasaki VN 1600 Mean Streak / VNT60B Kawasaki VN 1700 Classic / VNT70E Kawasaki VN 2000 Classic Suzuki VZ 1600 Marauder / VNT60B The illustration is exemplary, the brackets are delivered vehicle-specific.All mounting materials required for installation are supplied.

Product number: H734-700AB

Manufacturer: Highway Hawk

€40.82*