Handlebar "Narrow Ape 40" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 700 mm High: 400 mm Depth: 210 mm Clamping width: 130 mmHandlebar width lower edge: approx. 210mmMaterial: Steel Finish: black dull3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C – XL1Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG – FXDHarley Davidson FXDI, FXDLI, FXDWG, FXDX/I – FD1Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI – FD2Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC – FS2Harley Davidson FLST, FXST, FXSTB, FXSTC – FXSTHarley Davidson FLHR, FLHRC, FLHRCI, FLHRS – FL1Harley Davidson FLHR – FLHRFor vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic.
Handlebar "Narrow Ape 40" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 700 mm High: 400 mm Depth: 210 mm Clamping width: 130 mmHandlebarwidth lower edge: approx. 210mmMaterial: Steel Finish: Chrome 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C – XL1Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG – FXDHarley Davidson FXDI, FXDLI, FXDWG, FXDX/I – FD1Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI – FD2Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC – FS2Harley Davidson FLST, FXST, FXSTB, FXSTC – FXSTHarley Davidson FLHR, FLHRC, FLHRCI, FLHRS – FL1Harley Davidson FLHR – FLHRFor vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic.
Handlebar "Narrow Ape 30" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 700 mm High: 280 mm Depth: 210 mm Clamping width: 130 mmHandlebarwidth lower edge: approx. 220mmMaterial: Steel Finish: black dull3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C – XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG – FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I – FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI – FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC – FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC – FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS – FL1 Harley Davidson FLHR – FLHR For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic.
Handlebar "Narrow Ape 30" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 700 mm High: 280 mm Depth: 210 mm Clamping width: 130 mmHandlebar width lower edge: approx. 220mm Material: Steel Finish: Chrome 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883, XLH1200, XL53C – XL1 Harley Davidson XLH, XLS, XLX , XLH883, XLH1100, XLH1200, -S, -C, -L , XL53C, XL1200, -C, -S - XL/2 Harley Davidson XL883, -R, -C, -L, -N , XL53C, XL883, XL1200, -C, -R, -L, -N, -X - XL2 Harley Davidson XR1200 - XR1 Harley Davidson FXD, FXDB, FXDL, FXDWG – FXD Harley Davidson FXDI, FXDLI, FXDWG, FXDX/I – FD1 Harley Davidson FXD35, FXDB, FXDC/I, FXDI, FXDLI, FXDWGI – FD2 Harley Davidson FLSTCI, FLSTFI, FLSTI, FLSTN, FXST, FXSTB, FXSTC, FXSTD, FLSTC – FS2 Harley Davidson FLST, FXST, FXSTB, FXSTC – FXST Harley Davidson FLHR, FLHRC, FLHRCI, FLHRS – FL1 Harley Davidson FLHR – FLHR For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic.
Steelbreaded Throttle Cable+ 25 cm longer to the original length (1 Piece)forSuzuki VS 1400 Intruder / VX51LWith clamping plate on the throttle cableThe steelbreaded throttle is exchanged for the original throttle.L1= approx. 120cmL2= approx. 149cm The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture.1 steelreaded throttle cable is included in the delivery.We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.
Motorcycle mirror "Round" for L or R in blackUniversal - suitable for all motorcycles with M10x1.25 mountingWithout Yamaha adapterOrder the adapter 91-304008 for Harley Davidson modelsMirror glass dimensions: A: 75 mmDimensions mirror with mounting arm: C: 120 mm D: 120 mmIncluded in delivery:1 piece
"Made in Germany"Riser "Glide Style" (1 pair)Height: 200 mmYou can use a 1" (25,4 mm) or 7/8" (22 mm) handlebar.The risers are supplied with a TÜV Test Report § 19/3.All risers are supplied with clamping shells and all the screws required for assembly to fit on your vehicle (see picture),So that the risers can be used on all Japanese soft choppers where the original risers are unscrewable.Our risers are made of steel and are available in high-gloss chrome, black shiny powder coated or black dull powder coated.To achieve corrosion resistance in powder coating, such as chromium plating, the risers are galvanically nickel-plated before the powder coating.Included in the delivery:1 x Risers (1 pair)2 x Bolt M12 to M102 x Bolt M12x1, 50x502 x Bolt M12x1, 5x704 x Half Shells (for 7/8 22 mm Handlebars)
"Made in Germany"Riser "Glide Style" (1 pair)Height: 200 mmYou can use a 1" (25,4 mm) handlebars.For inner cable wireThe risers are supplied with a TÜV Test Report § 19/3.All risers are supplied with clamping shells and all the screws required for assembly to fit on your vehicle (see picture),So that the risers can be used on all Japanese soft choppers where the original risers are unscrewable.Our risers are made of steel and are available in high-gloss chrome, black shiny powder coated or black dull powder coated.To achieve corrosion resistance in powder coating, such as chromium plating, the risers are galvanically nickel-plated before the powder coating.Included in the delivery:1 x Risers (1 pair)2 x Bolt 22
"Made in Germany"Riser "Glide Style" (1 pair)Height: 150 mmYou can use a 1" (25,4 mm) or 7/8" (22 mm) handlebar.The risers are supplied with a TÜV Test Report § 19/3.All risers are supplied with clamping shells and all the screws required for assembly to fit on your vehicle (see picture),So that the risers can be used on all Japanese soft choppers where the original risers are unscrewable.Our risers are made of steel and are available in high-gloss chrome, black shiny powder coated or black dull powder coated.To achieve corrosion resistance in powder coating, such as chromium plating, the risers are galvanically nickel-plated before the powder coating.Included in the delivery:1 x Risers (1 pair)2 x Bolt M12 to M102 x Bolt M12x1, 50x502 x Bolt M12x1, 5x704 x Half Shells (for 7/8 22 mm Handlebars)
"Made in Germany"Riser "Glide Style" (1 pair)Height: 150 mmYou can use a 1" (25,4 mm) handlebars.For inner cable wireThe risers are supplied with a TÜV Test Report § 19/3.All risers are supplied with clamping shells and all the screws required for assembly to fit on your vehicle (see picture),So that the risers can be used on all Japanese soft choppers where the original risers are unscrewable.Our risers are made of steel and are available in high-gloss chrome, black shiny powder coated or black dull powder coated.To achieve corrosion resistance in powder coating, such as chromium plating, the risers are galvanically nickel-plated before the powder coating.Included in the delivery:1 x Risers (1 pair)2 x Bolt 22
"Made in Germany"Riser "Glide Style" (1 pair)Height: 130 mmYou can use a 1" (25,4 mm) handlebars.For inner cable wireThe risers are supplied with a TÜV Test Report § 19/3.All risers are supplied with clamping shells and all the screws required for assembly to fit on your vehicle (see picture),So that the risers can be used on all Japanese soft choppers where the original risers are unscrewable.Our risers are made of steel and are available in high-gloss chrome, black shiny powder coated or black dull powder coated.To achieve corrosion resistance in powder coating, such as chromium plating, the risers are galvanically nickel-plated before the powder coating.Included in the delivery:1 x Risers (1 pair)2 x Bolt 22
"Made in Germany"Riser "Glide Style" (1 pair)Height: 100 mmYou can use a 1" (25,4 mm) or 7/8" (22 mm) handlebar.The risers are supplied with a TÜV Test Report § 19/3.All risers are supplied with clamping shells and all the screws required for assembly to fit on your vehicle (see picture),So that the risers can be used on all Japanese soft choppers where the original risers are unscrewable.Our risers are made of steel and are available in high-gloss chrome, black shiny powder coated or black dull powder coated.To achieve corrosion resistance in powder coating, such as chromium plating, the risers are galvanically nickel-plated before the powder coating.Included in the delivery:1 x Risers (1 pair)2 x Bolt M12 to M102 x Bolt M12x1, 50x502 x Bolt M12x1, 5x704 x Half Shells (for 7/8 22 mm Handlebars)
"Made in Germany"Riser "Glide Style" (1 pair)Height: 100 mmYou can use a 1" (25,4 mm) handlebars.For inner cable wireThe risers are supplied with a TÜV Test Report § 19/3.All risers are supplied with clamping shells and all the screws required for assembly to fit on your vehicle (see picture),So that the risers can be used on all Japanese soft choppers where the original risers are unscrewable.Our risers are made of steel and are available in high-gloss chrome, black shiny powder coated or black dull powder coated.To achieve corrosion resistance in powder coating, such as chromium plating, the risers are galvanically nickel-plated before the powder coating.Included in the delivery:1 x Risers (1 pair)2 x Bolt 22