HIGHSIDER DRL CONTROL- BOX CB1Daytime running light control box for vehicles without light switchThe BOX is suitable for LED and conventional headlights and is installed between the main headlight with integrated or separate daytime running light and the vehicle electrical system.Dimensions length: 48 mm width: 28 mm Height: 14 mmAssignment: IN (vehicle electrics): Yellow = high beam (+) Blue = low beam (+) ON / OFF switch between White = parking light (+) Red = Ignition 15 (+) Black = Ground (-)OUT (headlight) Yellow = High beam (+) Blue = Low beam (+) Black = Ground (-)To the daytime running light: White = parking light (+) Red = Daytime running light (+)Scope of delivery: 1 pieceNote: A separate ON and OFF switch is also required.
Variable mounting adapter M6, black This adapter provides a neat, quick solution for many mounting situations that would otherwise require costly custom fabrication. It consists of two parts: A shank nut and a clamping piece. The stem nut has an M6 internal thread. The clamping piece can be moved and rotated on the stem nut and can accommodate all luminaires with M5 threads (Atto®, micro S, Rhombus S) at any angle. The degrees of freedom of this attachment allow the light to be perfectly aligned in the direction of travel and locked in place with grub screws. The light can thus be mounted, for example, below the fittings, see photos. To do this, simply replace the nut of the axle of the brake or clutch lever with the stem nut. The clamping piece alone can also be installed together with the handlebar mirror, for example, see photos.
LED light strip 50 White LEDs with 3M tape - 60 cm longExport only in reach of StVZO forbiddenNote: It is possible to cut the strip to the desired lengthFitment = double sides adhesive tape
LED light strip 50 "Amber" LEDs with 3M tape - 50 cm longExport only in reach of StVZO forbidden Note: It is possible to cut the strip to the desired length Fitment = double sides adhesive tapeIncluded in delivery:1 piece
LED light strip 50 red LEDs with 3M tape - 50 cm longExport only in reach of StVZO forbiddenNote: It is possible to cut the strip to the desired lengthFitment = double sides adhesive tapeIncluded in delivery:1 piece
LED light strip 50 White LEDs with 3M tape - 50 cm longExport only in reach of StVZO forbiddenNote: It is possible to cut the strip to the desired lengthFitment = double sides adhesive tape
Highway Hawk clamp "Easy Clampchrome-plateddiameter= 38mmClamp set for mounting Highway Hawk footpegs or auxiliary headlights.Suitable for footrests: H-73-2761, H-73-496,H-73-497 and H-73-498Scope of delivery: 1 piece
Highway Hawk clamp "Easy Clampchrome-plateddiameter= 25mmClamp set for mounting Highway Hawk footpegs or auxiliary headlights.Suitable for footrests: H-73-2761, H-73-496,H-73-497 and H-73-498Scope of delivery: 1 piece
Turn signal adaptor kit (2 Pcs) to create the ultimate H-D look in combination with spotlight bracket and your OEM turn signals Fits below all spotlights that uses M10 mounting