Highsider CNC aluminum lamp holder set XSThe holder for turn signal mounting is suitable for threaded bolts up to size M1035-37mm diameterDimensions: Length, holder: 48 mm (mounting screw in the clamp - headlight mounting). Total length: 65 mmScope of delivery: 1 set 4x clamps2x holder short Reducing strip
Highsider CNC Headlight Bracket Set ShortThe headlight holders have a receptacle for turn signal mounting up to a M10 threaded bolt For standpipes with a diameter of 49/50/52/54mmDimensions: Length of the holder (from the lower fastening screw in the clamp to the center of the hole for the headlight attachment): 87 mm Distance between the turn signal attachment and the fastening screw in the clamp (center of the hole in each case): approx. 20 mm Total length from outside standpipe (With straight delivery.): approx. 100 mmScope of delivery: 1 set (4x clamps + 2x lamp holder) Reducing strip
Highsider CNC Headlight Bracket Set ShortThe headlight holders have a receptacle for turn signal mounting up to a M10 threaded bolt For standpipes with a diameter of 42 mm to 43 mmDimensions: Length of the holder (from the lower fastening screw in the clamp to the center of the hole for the headlight attachment): 87 mm Distance between the turn signal attachment and the fastening screw in the clamp (center of the hole in each case): approx. 20 mm Total length from outside standpipe (With straight delivery.): approx. 100 mmScope of delivery: 1 set (4x clamps + 2x lamp holder) Reducing strip
Highway Hawk Highsider CNC Headlight Bracket Set ShortThe headlight holders have a receptacle for turn signal mounting up to a M10 threaded bolt For standpipes with a diameter of 42 mm to 43 mmDimensions: Length of the holder (from the lower fastening screw in the clamp to the center of the hole for the headlight attachment): 87 mm Distance between the turn signal attachment and the fastening screw in the clamp (center of the hole in each case): approx. 20 mm Total length from outside standpipe (With straight delivery.): approx. 100 mmScope of delivery: 1 set (4x clamps + 2x lamp holder) Reducing strip
Highsider CNC Headlight Bracket Set ShortThe headlight holders have a receptacle for turn signal mounting up to a M10 threaded bolt For standpipes with a diameter of 38 mm to 41 mmDimensions: Length of the holder (from the lower fastening screw in the clamp to the center of the hole for the headlight attachment): 87 mm Distance between the turn signal attachment and the fastening screw in the clamp (center of the hole in each case): approx. 20 mm Total length from outside standpipe (With straight delivery.): approx. 100 mmScope of delivery: 1 set (4x clamps + 2x lamp holder) Reducing strip
Highsider CNC Headlight Bracket Set ShortThe headlight holders have a receptacle for turn signal mounting up to a M10 threaded bolt For standpipes with a diameter of 38 mm to 41 mmDimensions: Length of the holder (from the lower fastening screw in the clamp to the center of the hole for the headlight attachment): 87 mm Distance between the turn signal attachment and the fastening screw in the clamp (center of the hole in each case): approx. 20 mm Total length from outside standpipe (With straight delivery.): approx. 100 mmScope of delivery: 1 set (4x clamps + 2x lamp holder) Reducing strip
Highsider CNC Headlight Bracket Set ShortThe headlight holders have a receptacle for turn signal mounting up to a M10 threaded bolt For standpipes with a diameter of 35 mm to 37 mmDimensions: Length of the holder (from the lower fastening screw in the clamp to the center of the hole for the headlight attachment): 87 mm Distance between the turn signal attachment and the fastening screw in the clamp (center of the hole in each case): approx. 20 mm Total length from outside standpipe (With straight delivery.): approx. 100 mmScope of delivery: 1 set (4x clamps + 2x lamp holder) Reducing strip
Highsider CNC Headlight Bracket Set ShortThe headlight holders have a receptacle for turn signal mounting up to a M10 threaded bolt For standpipes with a diameter of 35 mm to 37 mmDimensions: Length of the holder (from the lower fastening screw in the clamp to the center of the hole for the headlight attachment): 87 mm Distance between the turn signal attachment and the fastening screw in the clamp (center of the hole in each case): approx. 20 mm Total length from outside standpipe (With straight delivery.): approx. 100 mmScope of delivery: 1 set (4x clamps + 2x lamp holder) Reducing strip
Highsider CNC aluminum turn signal bracket set chromefor turn signals with M8 threaded boltThe set consists of 2 clamps (item no. 207-419) and 2 turn signal holders (item no. 220-216)Clamps for standpipes with a diameter of 47mm, 49 mm, 50 mm, 52mm and 54 mmScope of delivery: 1 pair
Highsider CNC aluminum turn signal bracket set chromefor turn signals with M8 threaded boltThe set consists of 2 clamps (item no. 207-409) and 2 turn signal holders (item no. 220-216)Clamps for standpipes with a diameter of 42 mm to 43 mmScope of delivery: 1 pair
Highsider CNC aluminum turn signal bracket set chromefor turn signals with M8 threaded boltThe set consists of 2 clamps (item no. 207-405) and 2 turn signal holders (item no. 220-216)Clamps for standpipes with a diameter of 38 mm to 41 mmScope of delivery: 1 pair
Highsider CNC aluminum turn signal bracket set chromefor turn signals with M8 threaded boltThe set consists of 2 clamps (item no. 207-403) and 2 turn signal holders (item no. 220-216)Clamps for standpipes with a diameter of 35 mm to 37 mmScope of delivery: 1 pair
Highsider CNC aluminum turn signal bracket set blackfor turn signals with M8 threaded boltThe set consists of 2 clamps (item no. 207-418) and 2 turn signal holders (item no. 220-215)Clamps for standpipes with a diameter of 47mm, 49 mm, 50 mm, 52mm and 54 mmScope of delivery: 1 pair
Highsider CNC aluminum turn signal bracket set blackfor turn signals with M8 threaded boltThe set consists of 2 clamps (item no. 207-408) and 2 turn signal holders (item no. 220-215)Clamps for standpipes with a diameter of 42 mm to 43 mmScope of delivery: 1 pair
Highsider CNC aluminum turn signal bracket set blackfor turn signals with M8 threaded boltThe set consists of 2 clamps (item no. 207-404) and 2 turn signal holders (item no. 220-215)Clamps for standpipes with a diameter of 38 mm to 41 mmScope of delivery: 1 pair
Highsider CNC aluminum turn signal bracket set blackfor turn signals with M8 threaded boltThe set consists of 2 clamps (item no. 207-402) and 2 turn signal holders (item no. 220-215)Clamps for standpipes with a diameter of 35 mm to 37 mmScope of delivery: 1 pair
Headlight bracket set for 49-54 mm diameterThe diameter can be reduced with the enclosed insert stripsThe mount for the headlight attachment is suitable for threaded bolts up to size M10Material: billet aluminumDimensions: Length of the holder: 87mmIncluded: 4x clamps 2x lamp holder Reducing strips