Product information "Bobber Kit Suzuki M 800 Intruder"
| Motorcycle manufacturer: | Suzuki |
|---|---|
| Motorcycle trade name: | M 800 Intruder, VL 800 Volusia |
| Motorcycle type: | WVB4, WVBM |
Bobber Kit Suzuki M 800 Intruder
€799.00*
Production time approx 14 days. Production starts after receipt of order
Assembly in our own workshop
Lemgo, Germany · by appointment
- Professional fitting directly at the manufacturer
- On request including TÜV inspection and registration (where possible)
- Can be combined with further conversions
Non-binding · product is pre-filled
- Worldwide shipping
- Fast processing and prompt shipping
- Direct from manufacturer
- Convenient purchase on account
- Guest order possible without customer account
Customers also viewed
Made in GermanyBobber Kit/ Fender Kit with TÜV Test Report § 19/3 from TÜV NORDForSuzuki M 800 Intruder / WVB4Suzuki VL 800 Volusia / WVBMScope of delivery:-Ready-to-install Fender 2mm thickness-Fender holder-Struts with turn signal holder- Axle-Drilling template, drawing, assembly instructionsThe sample images show the built-in Bobber kit on a Suzuki M 800 Intruder.The seat, the license plate holder and the lighting unit are also available to suit the Bobber kit.Use of the Bobber kit eliminates the pillion.
Seat Kit complete with black springs and bracketforSuzuki M 800 Intruder / WVB4Pillowcase: Imitation leather black,Pattern: Of choiceThread: Of choiceIncluded in the delivery:1 x Seat2 x Springs1 x Cover Plate1 x Bracket for cover plate1 x HingeThe Seat Kit can only be installed in conjunction with the Bobber Kit and does not fit on the original fender.
"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforSuzuki M 800 Intruder / WVB4For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
Made in GermanyBobber Kit/ Fender Kit with TÜV Test Report § 19/3 from TÜV NORDForYamaha XV 950 / VN03, VN07Yamaha XV 950 R / VN03, VN07Scope of delivery:-Ready-to-install Fender -Fender holder-Struts with turn signal holder-Drilling template, drawing, assembly instructionsThe sample images show the built-in Bobber kit on a Yamaha XV 950The seat, the license plate holder and the lighting unit are also available to suit the Bobber kit.Use of the Bobber kit eliminates the pillion.
Fender Struts (1 Set) with TÜV Test Reports §19/3for Suzuki VL 800 Volusia / WVBMThe rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ring.Turnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3
Side Mount Brackets for License plate trim 59-061Made of Chromed steel Additional part required: License plate trim: 59-061 Taillight: 68-0602 Suzuki: C800 Intruder/Boulevard (C50) '05 - '09 C800 Intruder/Boulevard (C50) '09 >up M800 Intruder < '05 M800 intruder/Boulevard (M50) '06-'09 VL800 Volusia < '05WVBM - WVB4