Exhaust system Falcon "Double Groove" Honda VTX 1800 with EG-BE

Falcon Double Groove exhaust system without cat and E-mark (EG-BE)ForHonda VT 750 Shadow / RC50 2004 up 2007The exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of stainless steel and high-gloss polished. The outer diameter is approx. 60 mm. The conversion to the Falcon Double Groove exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (EG-BE), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 and 3 are sample images of a mounted double groove exhaust system on a Honda.Supplied with:- Falcon Double Groove exhaust system- Mounting instructions- EG-BE documents

Passenger Peg Extensions (1 Pair) chrome for Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 Honda VTX 1300 / SC552 Honda VT 1300 CX Fury / SC61 Yamaha XVS 125 Drag Star Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16 Yamaha XV 1600 Wild Star / VP08 The lowering is about 10 cm. All assembly materials required for assembly are included.

Falcon Cromo Line - Slash Cut exhaust system with cat and E-mark (EG-BG)ForKawasaki VN 800 Vulcan and Classic / VN800A and VN800BThe exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of steel and high-gloss chrome. You get the typical Slash Cut design. The conversion to the Falcon Cromo Line exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 are a sample image of a mounted Cromo Line exhaust system on a Yamaha. Supplied with:- Falcon Cromo Line exhaust system- Mounting instructions- EG-BG documents

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3for Honda VTX 1300 / SC46 Honda VTX 1800 / SC52 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 15 cm forward-mounted footrest system forHonda VTX 1800 / SC46 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

Falcon Double Groove exhaust system without cat and E-mark (EG-BE)ForSuzuki VL 1500 Intruder LC / WVAL 1998 up to 2004The exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of stainless steel and high-gloss polished. The outer diameter is approx. 60 mm. The conversion to the Falcon Double Groove exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (EG-BE), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 and 3 are sample images of a mounted double groove exhaust system on a Suzuki. Supplied with:- Falcon Double Groove exhaust system- Mounting instructions- EG-BE documents