Exhaust system Falcon "Double Groove" Kawasaki VN 1500 - 1600 Mean Streak, Suzuki VZ 1600 Marauder with EG-BE

Falcon Cromo Line - Slash Cut exhaust system with cat and E-mark (EG-BG)ForKawasaki VN 800 Vulcan and Classic / VN800A and VN800BThe exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of steel and high-gloss chrome. You get the typical Slash Cut design. The conversion to the Falcon Cromo Line exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 are a sample image of a mounted Cromo Line exhaust system on a Yamaha. Supplied with:- Falcon Cromo Line exhaust system- Mounting instructions- EG-BG documents

Falcon Double Groove exhaust system without cat and E-mark (EG-BE)ForKawasaki VN 800 Vulcan and Classic / VN800A and VN800BThe exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of stainless steel and high-gloss polished. The outer diameter is approx. 60 mm. The conversion to the Falcon Double Groove exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (EG-BE), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 and 3 are sample images of a mounted double groove exhaust system on a Honda.Supplied with:- Falcon Double Groove exhaust system- Mounting instructions- EG-BE documents

Mastercylindercover or Clutch cylinder cover "Flame"forKawasaki VN 750 Vulcan / VN750A ACHTUNG NUR FÜR MODELLE MIT RUNDEM DECKEL Kawasaki VN 800 Classic Vulcan / alle Modelle, Kawasaki VN 1500 Classic / VNT50D VNT50N, Kawasaki VN 1500 SE Vulcan / VNT50A, Kawasaki VN 1500 Drifter For older vehicles we recommend to buy a new original gasket from your dealer. There is no new gasket included. All assembly materials required for assembly are included.Included in delivery:1 piece

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Kawasaki VN 1500 Mean Streak / VNT50P Suzuki VZ 1600 Marauder / VNT60B The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

HIGHSIDER handlebar end mirror in cross design with an aluminum head. Suitable for handlebars with an inner handlebar diameter of 12 to 21 mm, i.e. for most 7/8-inch and 1-inch aluminum or steel handlebars. Can be used for left and right side, E-approved.A question of perspective - whether retro or modern. The HIGHSIDER mirror series are characterized by their distinctive design and aerodynamic function. So you can keep an overview.Dimensions:Width: 110 mmHeight: 110 mmDepth: 20 mmLength, arm to joint: 70 mm Length, arm to clamp: 115 mmWidth, clamp: 12 mmScope of delivery: 1 pc. incl. reduction rings for 1 inch and 7/8 inchNote:Use the HIGHSIDER sealing caps to close any holes for mounting the original handlebar mirrors: Article 160-314

Falcon Double Groove exhaust system without cat and E-mark (EG-BE)ForSuzuki VL 1500 Intruder LC / WVAL 1998 up to 2004The exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of stainless steel and high-gloss polished. The outer diameter is approx. 60 mm. The conversion to the Falcon Double Groove exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (EG-BE), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 and 3 are sample images of a mounted double groove exhaust system on a Suzuki. Supplied with:- Falcon Double Groove exhaust system- Mounting instructions- EG-BE documents

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 17 cm forward-mounted footrest system for Kawasaki VN 1500 Mean Streak / VNT50P The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.