Exhaust system Falcon "Double Groove" Suzuki VL 1500 Intruder LC with EG-BE

Falcon Double Groove exhaust system without cat with E-mark (EG-BG) For Suzuki VL 800 Volusia / WVBM Suzuki M 800 Intruder / WVB4 Suzuki C 800 Intruder / WVBM The exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of stainless steel and high-gloss polished. The outer diameter is approx. 60 mm. The conversion to the Falcon Double Groove exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BE In the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 and 3 are sample images of a mounted double groove exhaust system on a Honda. Supplied with: - Falcon Double Groove exhaust system - Mounting instructions - EG-BG documents

Falcon Cromo Line - Slash Cut slip on system with cat and E-mark (EG-BG)ForSuzuki VS 1400 Intruder / VX51LThe exhaust system is supplied as a slip on system installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of steel and high-gloss chrome. You get the typical Slash Cut design. The conversion to the Falcon Cromo Line exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 are a sample image of a mounted Cromo Line exhaust system on a Suzuki.Supplied with:- Falcon Cromo Line slip on system- Mounting instructions- EG-BG documents

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Suzuki VL 800 Volusia / WVBM Suzuki M 800 Intruder / WVB4 Suzuki VL 1500 Intruder / AL Suzuki M 1500 Intruder / WVCU Suzuki VZR (M) 1800 Intruder / WVCA The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

Falcon Double Groove exhaust system with cat and E-mark (EG-BG)ForSuzuki VL 800 Volusia / WVBMSuzuki M 800 Intruder / WVB4Suzuki C 800 Intruder / WVBMThe exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of stainless steel and high-gloss polished. The outer diameter is approx. 60 mm. The conversion to the Falcon Double Groove exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 and 3 are sample images of a mounted double groove exhaust system on a Honda.Supplied with:- Falcon Double Groove exhaust system- Mounting instructions- EG-BG documents

Handlebar "Poseidon" - "1" (25.4 mm) with TÜV parts certificate §19/3 Handlebar diameter 32mm. In the area of the clamps "1"" (25.4mm) Width: 900 mm Height: 120 mm Depth: 210 mm Clamp width: 135 mm Handlebar width lower edge: approx. 240 mmMaterial: steel Finish: black matt 3 holes, 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate: Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1Harley Davidson / FXD DYNA / FD2Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST Victory / Jackpot, Vegas Jackpot, Ness Jackpot, Hammer 8-Ball / H/J Victory / Boardwalk, Vegas 8-Ball, Ness Vegas / V/K For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Passenger Peg Extensions (1 Pair) chromefor Suzuki C 800 Intruder / WVBM - WVB4 Suzuki M 800 Intruder / WVBM - WVB4 Suzuki VL 800 Volusia / WVBM - WVB4 The lowering is about 10 cm.All assembly materials required for assembly are included.

Falcon Cromo Line - Slash Cut slip on system with cat and E-mark (EG-BG)ForYamaha XV 750 Virago / 4FY - 4PWYamaha XV 1000 Virago / 2AEYamaha XV 1100 Virago / 3LPThe exhaust system is supplied as a slip on system installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of steel and high-gloss chrome. You get the typical Slash Cut design. The conversion to the Falcon Cromo Line exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 are a sample image of a mounted Cromo Line exhaust system on a Suzuki.Supplied with:- Falcon Cromo Line slip on system- Mounting instructions- EG-BG documents