HIGHSIDER VICTORY-BLAST handlebar end mirror with LED indicators, fine bead blasted surface in black satin finish

HIGHSIDER VICTORY-BLAST handlebar end mirror with LED indicators in the mirror arm

Not approved for road traffic without E test mark

Functionality combined with great looks - handlebar end mirror with integrated LED blinker in the mirror arm. Sporty lines in a bead-blasted black satin finish. For all those who value a particularly elegant look on their motorcycle. This aesthetic BLAST surface look is discreetly elegant. Thanks to the CNC-milled surface, the HIGHSIDER VICTORY-BLAST made of aluminum with its typical design looks very modern and fits visually on many bikes. Suitable for handlebars with an inner diameter of 12 to 22 mm, i.e. for most 7/8 and 1 inch aluminum or steel handlebars. Can be used for left and right side for suspended mounting.

Character and overview - whether retro or modern. The HIGHSIDER mirror series are characterized by their distinctive design and aerodynamic function. This is prudence in perfection.

Dimensions:
A Head width: 117 mm
B Head height: 83 mm
C Width: 55 mm
D Height: 190 mm

Handle length: 75 mm from the head to the bend and 70 mm to the end of the handle
Mirror arm width: 12 mm
Cable length from handlebar end: 900 mm

Connections:
Yellow cable = blinker (+)
Black cable = ground (-)

Power consumption: 12.5V, 0.11 A, 1.35 W

Scope of delivery: 1 piece, incl.
1 clamping sleeve each with D. 12 mm and D. 16 mm
1 spacer sleeve each with D. 14 mm, D. 18 mm and D. 22 mm
1 x M6 central screw
1 x M6 conical nuts
1 x black plastic cover cap

Tip:
Please use the HIGHSIDER caps to close any holes for fastening the original handlebar mirrors.
An installation tutorial is available on YouTube in our channel (HIGHSIDER Tips & Tricks). Link:
https://www.youtube.com/watch?v=FfqiOz3U9Wk

Notes:
This rear view mirror is only suitable for suspended mounting!
You must always install 2 pieces, as indicators are integrated. These replace your OLD indicators.
Please use the HIGHSIDER sealing caps to close any holes for fastening the original handlebar mirrors.