Highway Hawk Floorboard Set for rider "Smooth" chrome Suzuki VS 600 - 750 - 800 - 1400 Intruder with ABE

Only 2 available

€374.21*

% €415.79* (10% saved)

Prices incl. VAT plus shipping costs

Few pieces available, delivery time 1-4 days

Stück

Product number: H733-850

Manufacturer: Highway Hawk

MSRP without VAT: 349,4

Our benefits

Worldwide shipping
Same day shipping for orders placed before 10:00 a.m. (subject to availability)
Direct from manufacturer
Convenient purchase on account
Guest order possible without customer account

Product information "Highway Hawk Floorboard Set for rider "Smooth" chrome Suzuki VS 600 - 750 - 800 - 1400 Intruder with ABE"

Floorboard Set for rider chrome with ABE (general operating permit)

Design "Smooth"

for
Suzuki VS 600 Intruder / VN51B
Suzuki VS 750 Intruder / VR51B
Suzuki VS 800 Intruder / VS52B
Suzuki VS 1400 Intruder / VX51L

The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design).

The dimensions of the floorboards:
Length: approx. 27.5 cm
Width: approx. 12.5 cm

For all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.

Included in delivery:
Floorboards
Brackets

Properties "Highway Hawk Floorboard Set for rider "Smooth" chrome Suzuki VS 600 - 750 - 800 - 1400 Intruder with ABE"

Motorcycle manufacturer:	Suzuki
Motorcycle trade name:	VS 600 Intruder, VS 750 Intruder, VS 800 Intruder, VS 1400 Intruder
Motorcycle type:	VN51B, VR51B, VS52B, VX51L

Customers also bought

Highway Hawk Riser "Tech Glide 75 mm" M12 Bolt TÜV

Riser "Tech Glide" (1 pair) You can use a 1" (25,4 mm) or 7/8" (22 mm) handlebar Thread: M12 Height: 75 mm All risers are supplied with clamping shells and all the screws required for assembly to fit on your vehicle. The risers are supplied with a TÜV Test Report § 19/3 for: Suzuki VL 800 Volusia / WVBM For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed here, a cultivation assessment shall be carried out by an officially recognised expert of a technical Test centre for motor vehicle traffic. Included in the delivery: 1 x Risers (1 pair) 2 x Bolt M12 clamping shells

Product number: H56-0332

€116.96* €129.95* (10% saved)

Highway Hawk Motorcycle glasses/ sunglasses "Dakota" black frame

Motorcycle glasses/ sunglasses "Dakota"The glasses are provided with black frame.With our motorcycle glasses you have everything clearly in view.These motorcycle glasses have a beautiful retro / vintage designThe size is adjustableIncluded in delivery: 1x sunglasses

Product number: H02-917

€32.35* €35.94* (9.99% saved)

Highway Hawk Exhaust tailpipe Muffler "Megaton" in black fits d=38mm up to d=45mm - length 440mm (1 piece)

Highway Hawk Exhaust tailpipe Muffler "Megaton" in blackUniversal fits 38mm (1 1/2") up to 45mm (1 3/4")Mounting tip new gaskets and carburetor adjustments are recommendedWith bracket/ clamp (1Pc.) Length of product = 44 cm long Diameter = 38-45mm suitable baffle: H65-9415Without E-number. Not approved for public road use. For show purposes only.Included in delivery:1 piece

Product number: H65-941B

€99.71* €110.79* (10% saved)

Highway Hawk handlebars "Bad Ape 30" 700 mm wide 300 mm high for "1" (25.4 mm) clamp with 3 hole chrome TÜV

Handlebar "Bad Ape 30" - "1" (25.4 mm) with TÜV parts certificate §19/3 width: 700 mm Height: 300 mm Depth: 220 mm Clamp width: 190 mm Handlebar width lower edge: approx. 250 mmMaterial: steel Surface: Chrome3 holes each 1 x slotted hole between the clamps, 1 x slotted hole in the area of the grips With parts certificate according to §19/3. The following vehicle types are listed in the parts certificate:Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder M800, VZ800, -U, -UE / WVB4 Suzuki / VL800, -C, UE, -CUE / WVBM Suzuki / VL 800 Volusia, C 800 Intruder / WVBM Yamaha / XVS 650 Drag Star, Classic / VM03 Yamaha / XVS 650 Drag Star, Classic / VM04 Yamaha / XVS 950 A Midnight Star / VN02 Yamaha / XVS 1100 Drag Star, Classic / VP05 Yamaha / XVS 1100 Drag Star, Classic / VP16 Kawasaki / VN900 Custom / VN900B Suzuki, Kawasaki / VZ 1600 Marauder / VNT60B Harley Davidson XL883 / XL1200 XLH1200, XL1200C, XL1200S, XLH883, -Hugger, XL53C, XL883R, -Sportster XL1 Harley Davidson XLH Sportster, XLS Roadster, XLX, XLH 883, -1100, -1200, -S, -C, -L, XL53C, XL1200C, -S XL/2 Harley Davidson XL883, -R, -C, -L, -N, XL883C (53C), XL8, XL1200, -C, -R, -L,-N, -X XL2 Harley Davidson / XR1200 / XR1 Harley Davidson / FXD / FXD Harley Davidson / FD1 / FD1 Harley Davidson / FXD DYNA / FD2 Harley Davidson / FLST, FXST / FS2 Harley Davidson / FLST, FXST / FXST For vehicles that are not listed in the certificate, the following note is included in the certificate: If the special handlebar is fitted to a vehicle that is not listed here, an attachment assessment must be carried out by an officially recognized expert (aaS/aaSmT) from a technical inspection body for motor vehicle traffic.

Product number: H55-4001

€74.40* €82.67* (10% saved)

Details

Side license plate holder Kawasaki VN 800 Vulcan - Classic TÜV

License plate size: 200mmx200mm Germany | Surface: Chrome

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Kawasaki VN 800 Vulcan / VN800A Kawasaki VN 800 Classic / VN800B The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

Product number: MB20-2110-200-200L

€269.10* €299.00* (10% saved)

Highway Hawk Exhaust tailpipe muffler "turnout" chrome fits d=38 mm up to d= 45 mm - length 400mm

Highway Hawk Exhaust tailpipe muffler "turnout" in chrome1 pieceUniversal fits 38 mm (1 1/2'') up to 45 mm (1 3/4'') diameterMounting tip new gaskets and carburetor adjustments are recommended With bracket/ clamp (1 Pc.) Product length = 400 mm Diameter= 38-45mmWithout E-number. Not approved for public road use. For show purposes only.

Product number: H65-938

€85.67* €95.19* (10% saved)