Forward controll systems for motorcycles

The forward-mounted footrest system from Burchard Excellence was specially developed for the Kawasaki Eliminator 500. It ensures a relaxed riding position, improves ergonomics and gives the motorcycle an individual appearance. Made from high-quality materials and with precision and safety in mind, this product stands for German engineering and TÜV-tested quality.Brand and originThe footrest system is developed and manufactured in Germany.Brand: Burchard ExcellenceCountry of origin: Germany - Made in GermanyTest statusThe system is supplied with a general operating permit (ABE). This will be available from December 2025.Note on the ABE:The enclosed ABE (General Operating Permit) allows the vehicle part to be legally installed without additional registration in the vehicle documents - provided that all requirements of the ABE are met.Vehicle compatibilitySuitable for:Manufacturer: KawasakiModel: Eliminator 500Types: EL450A, EL450B, EL450C, EL450DMaterial and surfaceThe forward-mounted footrest system is made of high-quality steel and is available in the following finishes:Nickel-platedBlack matt powder-coatedThe selection is made via the variant selection in the store.Pre-positioning and lean angle clearanceThe forward offset to the original footrest system is 23 cm.The distance is measured from the center of the original footrests or footboards to the center of the new system.To improve or maintain the lean angle clearance, the height of the new footrests is raised by around 1.5 to 2.5 cm, depending on the design.Design and design variantsFootrests:Sundance look: With several small rubber rings (O-rings) - ideal for the classic style.Ness Style Look: With wide rubber rings - for a modern, clean look.Shift and brake levers:Version: MilledThe milled levers have two slotted holes and offer a modern, minimalist design.The picture shows the Ness Style Look version with milled levers. This is a model from the sample construction phase (3D rendered).Technical featuresThe shift and brake levers can be lubricated and are fitted with H1 grease nipples.Thanks to the grease bearing design, there is no play - for precise shifting and braking operations.The rod ends can also be lubricated with spray oil, which increases the service life of the system.Care instructions:We recommend lubricating the levers completely once before the start of the season and then servicing them if necessary.Scope of deliveryCompletely pre-assembled, pre-routed footrest systemBrake line (650 mm, with 20° eyelet and M10 x 1 AG)Supply hoseHydraulic brake light switchScrew material for mountingABE (general operating permit from the Federal Motor Transport Authority)Functional description of the brake light switchThe original mechanical brake light switch is replaced by a hydraulic brake light switch. This is mounted directly in the brake cylinder instead of the original banjo bolt. The electrical connection is made via the existing original cables.Installation - brief overviewInstallation is carried out in two main steps: Brake side and shift side.All necessary components such as brake hose, brake rod, mounting springs and bushes are included in the scope of delivery.Brake side:Removal of the original footrest system and brake line, installation of the hydraulic brake light switch, re-routing of the brake line and installation of the pre-assembled system on the frame.Shift side:Disassembly of the original system and shift parts, installation of the new pre-assembled unit, connection to the shift rod and installation of the horn with enclosed bushing.Detailed installation steps with dimensions and screw positions can be found in the enclosed installation instructions.Ergonomic advantages of forward-mounted footrest systemsForward-mounted footrest systems significantly improve the riding position, especially for taller riders. The forward-shifted seating position creates more legroom and a more relaxed posture on longer journeys.In addition, the pressure on the knees and hips is reduced, making the overall riding experience more harmonious and comfortable.Spare parts serviceAll individual components of the Burchard Excellence footrest system are also available separately as spare parts.This means that the system can be easily repaired or adapted if necessary.Our customer service team will be happy to help you select the right spare part.Burchard Excellence - precision, quality and safety.Developed and manufactured in Germany for demanding motorcyclists.

Diese vorverlegte Fußrastenanlage wurde speziell für die Honda CMX 1100 Rebel mit manueller Schaltung (Typ SC87A, Typgenehmigung e6*168/2013*00158*) entwickelt. Sie sorgt für eine entspanntere Sitzposition und mehr Komfort auf langen Fahrten. Gefertigt in Deutschland und geprüft nach höchsten Qualitätsstandards, steht dieses Produkt für TÜV-geprüfte Sicherheit und präzise Verarbeitung – Made in Germany.Hochwertige Verarbeitung – Marke Burchard ExcellenceDie Fußrastenanlage stammt aus dem Hause Burchard Excellence und wird vollständig in Deutschland gefertigt. Sie überzeugt durch ihre stabile Konstruktion aus hochwertigem Stahl sowie durch die präzise Fertigung und Vormontage.Mit ABE – Keine Eintragung erforderlichDie beiliegende ABE (Allgemeine Betriebserlaubnis) ermöglicht es, das Bauteil legal ohne zusätzliche Eintragung in die Fahrzeugpapiere zu verwenden – vorausgesetzt, sämtliche Auflagen der ABE werden eingehalten.FahrzeugkompatibilitätHersteller: HondaModell: CMX 1100 Rebel mit manueller SchaltungTyp: SC87A mit manueller SchaltungTypgenehmigung: e6*168/2013*00158*Materialien und OberflächenDie Anlage besteht aus hochwertigem Stahl und ist in folgenden Varianten erhältlich:Vernickelt und schwarz glänzend pulverbeschichtetVernickelt und schwarz matt pulverbeschichtetDie Auswahl der gewünschten Ausführung erfolgt über die Variantenoption im Onlineshop.Vorverlegung und SchräglagenfreiheitDie Anlage verlegt die Fußrasten um 23 cm nach vorn. Der Abstand wird von der Mitte der originalen Fußrasten bzw. Trittbretter bis zur Mitte der neuen Anlage gemessen.Je nach Ausführung wird die Schräglagenfreiheit durch eine Höherlegung von ca. 1,5 bis 2,5 cm zusätzlich verbessert oder beibehalten.Designvarianten der FußrastenZur Auswahl stehen zwei Designoptionen:Sundance Look mit mehreren kleinen Gummi-O-Ringen für einen klassischen StilNess Style Look mit breiten Gummiringen für ein modernes ErscheinungsbildSchalt- und Bremshebel – Gefräste AusführungDie Schalt- und Bremshebel sind gefräst und verfügen über zwei präzise gearbeitete Langlöcher – für ein modernes und funktionales Design.Die Kugellagerung der Hebel sorgt für eine spielfreie, wartungsfreie Funktion mit hoher Präzision. Zusätzlich können die Gelenkköpfe mit Sprühöl abgeschmiert werden, was die Lebensdauer des Systems deutlich verlängert.PflegehinweisZur Werterhaltung empfehlen wir, die Gelenkköpfe vor jeder Saison vollständig abzuschmieren und bei Bedarf nachzupflegen.LieferumfangKomplett vormontierte vorverlegte FußrastenanlageABE (Allgemeine Betriebserlaubnis)Schraubenmaterial zur MontageHydraulischer BremslichtschalterZusatzinformation zum BremslichtschalterDer originale Bremslichtschalter sowie das originale Relais des Tempomats werden durch den mitgelieferten hydraulischen Bremslichtschalter ersetzt. Dieser wird direkt im Bremszylinder anstelle der originalen Hohlschraube montiert. Der elektrische Anschluss erfolgt über die vorhandene Verkabelung.Kurzanleitung zur MontageOriginale Bremspumpe und Fußrastenträger demontierenNeuen Fußrastenträger am Rahmen befestigenDruckfeder MON 040 mit Federteller FDT 002 und Schraube MON 047 auf der Druckstange montierenBremshebel und Bremspumpe mit Bremsstange BRG 250 verbindenHohlschraube durch den hydraulischen Bremslichtschalter ersetzenBremsanlage entlüftenElektrische Verbindung zum alten Bremslichtschalter herstellenErgonomische Vorteile vorverlegter FußrastenanlagenVorverlegte Fußrasten verbessern die Ergonomie durch eine entspanntere Beinposition und eine aufrechtere Sitzhaltung. Das sorgt für mehr Komfort auf langen Strecken, reduziert die Belastung von Hüfte und Knien und schafft mehr Bewegungsfreiheit – besonders für große Fahrerinnen und Fahrer eine spürbare Entlastung.ErsatzteilserviceJedes Bauteil dieser Fußrastenanlage ist auch einzeln als Ersatzteil erhältlich. So sichern Sie sich maximale Langlebigkeit und eine unkomplizierte Reparatur im Bedarfsfall.Bei Fragen zur Ersatzteilwahl steht Ihnen unser Kundenservice gerne beratend zur Seite.

Die vorverlegte Fußrastenanlage von Burchard Excellence wurde speziell für anspruchsvolle Motorradfahrer entwickelt, die Komfort und Ergonomie auf langen Strecken schätzen. Gefertigt in Deutschland und TÜV-geprüft, steht dieses Produkt für geprüfte Qualität und höchste Fertigungsstandards.Marke und HerkunftHersteller: Burchard ExcellenceHerkunft: Deutschland – Made in GermanyABE – Allgemeine BetriebserlaubnisDie beiliegende ABE (Allgemeine Betriebserlaubnis) ermöglicht es, ein Fahrzeugteil legal ohne zusätzliche Eintragung in die Fahrzeugpapiere zu verbauen – sofern alle Auflagen der ABE eingehalten werden.FahrzeugkompatibilitätDiese Fußrastenanlage ist passend für:Hersteller: HondaHandelsbezeichnung: CMX 1100 Rebel DCT AutomatikTyp: SC87B DCT AutomatikTypgenehmigung: e6*168/2013*00158*Material und OberflächenvariantenDie Anlage wird aus hochwertigem Stahl gefertigt und ist in folgenden Oberflächen erhältlich:Vernickelt und schwarz glänzend pulverbeschichtetVernickelt und schwarz matt pulverbeschichtetHinweis: Die Auswahl erfolgt über die Variantenwahl im Shop.Technische Angaben zur VorverlegungDie Vorverlegung beträgt 23 cm, gemessen von der Mitte der originalen Fußrasten bzw. der Trittbrettmitte bis zur Mitte der neuen Fußrastenanlage.Um die Schräglagenfreiheit beizubehalten oder zu verbessern, wird das Höhenniveau der neuen Fußrasten je nach Ausführung um ca. 1,5 bis 2,5 cm angehoben.DesignvariantenFußrasten:Sundance Look: Klassisches Design mit mehreren kleinen O-Ringen aus GummiNess Style Look: Moderner Look mit breiten GummiringenSchalt- und Bremshebel:Gefräste Ausführung mit zwei Langlöchern pro Hebel für ein minimalistisches, modernes ErscheinungsbildDas Produktbild zeigt die Variante „Ness Style Look“ mit gefrästen Hebeln.Kugelgelagerte Hebel und abschmierbare GelenkköpfeDer Bremshebel ist kugelgelagert und wartungsfrei – für präzise Bremsvorgänge ohne Spiel.Die Gelenkköpfe der Hebel sind abschmierbar und lassen sich mit Sprühöl pflegen. Dies verlängert die Lebensdauer des Gesamtsystems erheblich.Pflegehinweis:Vor Saisonbeginn empfehlen wir eine vollständige Abschmierung der Gelenkköpfe. Bei Bedarf ist eine Nachpflege möglich.LieferumfangKomplett vormontierte FußrastenanlageABE vom Kraftfahrt-BundesamtMontage-SchraubenmaterialHydraulischer BremslichtschalterProduktdetails zum BremslichtschalterDer originale Bremslichtschalter sowie das Relais des Tempomats werden durch den mitgelieferten hydraulischen Bremslichtschalter ersetzt. Dieser wird direkt im Bremszylinder anstelle der Hohlschraube montiert.Der elektrische Anschluss erfolgt über die vorhandenen Originalkabel.Kurzübersicht zur MontageBremspumpe von der originalen Fußrastenanlage abschraubenRechten Fußrastenträger vom Rahmen entfernenNeuen, vormontierten Träger anschraubenMontagehinweis SC87:Druckfeder MON 040 mit Federteller FDT 002 und Schraube MON 047 auf Druckstange montierenBremspumpe und Bremshebel mit Bremsstange BRG 250 verbindenHohlschraube der Bremspumpe durch hydraulischen Bremslichtschalter ersetzenBremsanlage entlüftenKabel anschließenErgonomische Vorteile vorverlegter FußrastenVorverlegte Fußrastenanlagen bieten spürbare Vorteile in puncto Sitzkomfort und Ergonomie. Durch die nach vorne verlagerte Beinstellung wird eine entspanntere Sitzposition erreicht, die insbesondere auf längeren Strecken die Rücken- und Kniegelenke entlastet.Zusätzlich kann eine bessere Fahrzeugkontrolle durch optimierte Beinhaltung erzielt werden.ErsatzteilserviceAlle Komponenten dieser Fußrastenanlage sind einzeln als Ersatzteil erhältlich.Unser Kundenservice unterstützt Sie gerne bei der Auswahl passender Ersatzteile für eine nachhaltige und unkomplizierte Instandhaltung.

Professional installation of your forward footrest system – directly by the manufacturerWould you like to have your forward footrest system from Burchard Excellence professionally installed? No problem! Take advantage of the installation service at Motorrad Burchard in Lemgo (Lippe district) – directly by the manufacturer, in our modern, well-equipped specialist workshop.Scope of services:Professional installation of the forward footrest systemTÜV approval available on request (for systems with TÜV parts certificate)Personal consultation and final quality controlProcedure & information:By purchasing this service, you are making a binding appointment with us for installation.After completing your order, you will automatically receive an email with a link to our appointment overview, where you can conveniently select your preferred appointment.Delivery: between 9:00 a.m. and 10:00 a.m. on the day of your chosen appointment (or the day before, if you prefer).Pickup: between 3:00 p.m. and 4:00 p.m. on the same day.During the assembly, you are welcome to wait at our premises or explore the region.Upon request, we also offer a shuttle service to or from Lemgo train station.Assembly location:Burchard GmbHLagesche Straße 7232657 Lemgo (Lippe district)Leisure tips for your stay in Lemgo and the surrounding area:Make the most of your waiting time and discover the charming Hanseatic city of Lemgo or the diverse Lippe region:Lemgo Old Town: Historic half-timbered houses, cozy cafés, small shops, and the lively market square invite you to stroll and linger.Hexenbürgermeisterhaus (Witch Mayor's House): Exciting museum on the history of Lemgo and its legal system in the 17th century.Brake Castle: Impressive Renaissance castle with a Weser Renaissance museum and changing exhibitions.Extertalbahn: Nostalgic railway journey through the beautiful Extertal valley in a historic railcar.Teutoburg Forest/Eggegebirge Nature Park: Perfect for a short hike or bike ride through forests and hills – with magnificent views.VitaSol Therme Bad Salzuflen (approx. 10 minutes by car): Relaxation in the thermal baths and sauna facilities.Residence town of Detmold (approx. 20 minutes away): The old town, Detmold Castle, the famous Hermann monument, and the open-air museum are all worth a visit.Whether you're looking for relaxation, culture, or nature: A trip to Lemgo is well worth it – and will make your workshop appointment with us a thoroughly enjoyable day!

For maximum control and a stylish look: the small footrest with M8 thread from Burchard Excellence has been specially developed for mounting on the shift and brake levers of our pre-mounted footrest systems.Manufactured in Germany and available in chrome, glossy black or matt black, its non-slip surface ensures precise handling and a safe riding experience. Whether in Sundance style or Ness look - this footrest ideally rounds off the design of your chopper or cruiser conversions.The integrated M8 thread enables quick and precise installation. Perfectly matched to the components in the Burchard Excellence line.Product details:Suitable for: Shift lever/brake lever on pre-routed footrest systemsThread: M8Variants: Chrome, glossy black, matt blackStyle: Sundance look / Ness style lookMaterial: High-quality aluminumDelivery: 1 pieceMade in Germany

Give your chopper the finishing touch - with the large footrest for forward-mounted footrest systems from Burchard Excellence. This high-quality replacement or exchange footrest is "Made in Germany" and impresses with its first-class workmanship, outstanding appearance and maximum resilience.Whether in elegant chrome, sporty glossy black or matt black - choose between the Sundance style or the Ness style to give your motorcycle an individual touch. The ergonomically shaped surface ensures optimum grip and comfort - even on longer rides.Ideally matched to all pre-routed footrest systems from Motorrad Burchard - a must for discerning bikers and chopper enthusiasts with a sense of style and quality.Product details:Compatible with: forward-mounted footrest systems from Burchard ExcellenceFinishes: Chrome, glossy black, matt blackStyle: Sundance look / Ness style lookMaterial: High-quality aluminumErgonomic, non-slip, durableDelivery: 1 piece

"Made in Germany"Forward Controls Kit with German ABE14 cm forwardforKawasaki VN 2000 Classic / VNW00HThe Forward Controls Kit is delivered pre-mounted with all parts required for assembly, for example with an extended brake line (if necessary). The Forward Controls Kit fixed on the original frame points. Our Forward Controls Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated. In order to achieve corrosion resistance in powder coating, such as chrome, the Forward Controls Kit are galvanically nickel-plated before powder coating. All Motorrad Burchard Forward Control Kits are supplied with a 2-year warranty on processing and chromium plating. Shift- and Brakelevers are fitted by hand and provided with grease nipples. The connecting parts (ball joints) on the shift and brakerods are free of charge and also equipped with grease nipples. This quality standard provides a minimum of play on/off the waves and a maximum of lifetime. The Forward Control Kit deliverd with a ABE from Kraftfahrt-Bundesamt, a mounting instruction and a parts list. All removable parts are available as spare parts. The Forward Controls Kit is available in 2 different designs.

"Made in Germany"Forward-mounted footrest system with ABE from the Federal Motor Transport Authority15 cm forward-mounted footrest systemforTriumph Bonneville Speedmaster / DV01The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.

"Made in Germany"Forward mounted footrest system with ABE of the Kraftfahrt-Bundesamt (Federal Motor Transport Authority)30 cm advanced footrest systemforHonda CMX 1100 Rebel / SC83B DCT automatic transmissionAttention: For the assembly it is necessary to mill out the cover on the engine on the right side. The milling is necessary to be able to mount the footrest system on the frame. For customers who have no technical possibility to mill out the side cover, we offer the milling as a service. You can select this service when ordering. Please note that we need your original cover for this.The footrest system is delivered pre-assembled with all parts necessary for mounting, such as an extended brake line (if necessary). The assembly is done on the original frame mounting points. Our footrests are made of steel and are available in either high gloss chrome, gloss black powder coated or matte black powder coated. In order to achieve corrosion resistance similar to chrome plating, the footrest systems are galvanically nickel-plated before powder coating. All Motorrad Burchard footrest systems come with a 2-year warranty on workmanship and chrome plating.Shift and brake levers are ball bearing mounted. Force-transmitting connecting parts (ball joints) on the shift and brake rods are backlash-free and also equipped with grease nipples. This quality standard ensures a minimum of play on/at the shafts and maximum service life. The footrest system is supplied with an ABE from the Kraftfahrt-Bundesamt, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts.

"Made in Germany"Forward mounted footrest system with ABE of the Kraftfahrt-Bundesamt (Federal Motor Transport Authority)30 cm advanced footrest systemforHonda CMX 1100 Rebel / SC83A manual transmissionThe footrest system is delivered pre-assembled with all parts necessary for mounting, such as an extended brake line (if necessary). Mounting is done on the original frame mounting points.Our footrests are made of steel and are available in either high gloss chrome, gloss black powder coated or matte black powder coated. In order to achieve a corrosion resistance similar to chrome plating, the footrest systems are galvanically nickel-plated before powder coating. All Motorrad Burchard footrest systems come with a 2-year warranty on workmanship and chrome plating.Shift and brake levers are ball bearing mounted. Force-transmitting connecting parts (ball joints) on the shift and brake rods are backlash-free and also equipped with grease nipples. This quality standard ensures a minimum of play on/at the shafts and maximum service life. The footrest system is supplied with an ABE from the Kraftfahrt-Bundesamt, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.

"Made in Germany"Forward Controls Kit with German ABE 35 cm forwardforYamaha XV 950 Bolt and R / VN03 - VN07Yamaha XV 950 Racer / VN03 - VN07 Attention for racer models: Only in conjunction with the original parts of the Bolt in the area of the side stand, cover plate and motor switch.Original Yamaha Spare Part Number Cover Plate Bolt: 1TP-27322-00Original Yamaha Spare Part Number Engine Disconnector: 1TP-82566-00Original Yamaha screw for motor disconnector 1 piece: 91317-05016 The Forward Controls Kit is delivered pre-mounted with all parts required for assembly, for example with an extended brake line (if necessary). The Forward Controls Kit fixed on the original frame points. Our Forward Controls Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated. In order to achieve corrosion resistance in powder coating, such as chrome, the Forward Controls Kit are galvanically nickel-plated before powder coating. All Motorrad Burchard Forward Control Kits are supplied with a 2-year warranty on processing and chromium plating. Shift- and Brakelevers are fitted by hand and provided with grease nipples. The connecting parts (ball joints) on the shift and brakerods are free of charge and also equipped with grease nipples. This quality standard provides a minimum of play on/off the waves and a maximum of lifetime. The Forward Control Kit deliverd with a ABE from Kraftfahrt-Bundesamt, a mounting instruction and a parts list. All removable parts are available as spare parts. The Forward Controls Kit is available in 2 different designs.

Forward-mounted footrest system for the Honda CMX 500 Rebel - Burchard ExcellenceThe forward-mounted footrest system from Burchard Excellence was specially developed for the Honda CMX 500 Rebel. It enables an ergonomically optimized seating position and at the same time offers a high-quality design in proven quality. Manufactured in Germany, the product stands for durability, functionality and TÜV-tested safety.Brand and originThe footrest system comes from Burchard Excellence and is manufactured entirely in Germany - Made in Germany.ABE - General operating permitThe enclosed ABE (General Operating Permit) makes it possible to install the product legally and without additional registration in the vehicle documents, provided that all conditions of the ABE are met.Vehicle compatibilitySuitable for:Manufacturer: HondaTrade name: CMX 500 RebelType: PC56Typgenehmigung:e13*168/2013*00086*Material and surface variantsThe system is made of high-quality steel and is available in the following finishes:High-gloss chrome-platedNickel-plated and glossy black powder-coatedNickel-plated and matt black powder-coatedThe selection is made conveniently via the variant selection in the online store.Technical data on the forward controlsThe footrest system is moved 23 cm further forward. The distance is measured from the center of the original footrests to the center of the new position. To improve or maintain the lean angle clearance, the height level is raised by around 1.5 to 2.5 cm, depending on the design.Design variantsFootrests:Sundance look: Classic style with several small rubber ringsNess style look: Modern look with wide rubber ringsShift and brake levers:Smooth: Without slotted holes - for a classic appearanceMilled: With two slotted holes - modern and minimalistHigh-quality technology: Lubricatable joints and leversThe shift and brake levers are equipped with H1 grease nipples and grease bearings. This ensures play-free and precise operation. The rod ends can also be lubricated with spray oil, which significantly extends the service life of the system.Care instructions: We recommend lubricating the levers completely once at the start of each season and topping them up if necessary.Scope of deliveryCompletely pre-assembled footrest systemABE (general operating license)Screws for mountingHydraulic brake light switchTechnical implementation - replacing the brake light switchThe original mechanical brake light switch is replaced by the hydraulic brake light switch supplied. This is fitted directly in the brake cylinder instead of the original banjo bolt. The electrical connection is made using the existing original cables.Brief overview of installationBrake side:Remove the original brake pump and footrest carrierFit the new unit to the frameFit brake pump and pressure spring with spring plateConnect the brake leverInstall the hydraulic brake light switchBleed the brake systemEstablish electrical connection to the original cableShift side:Remove original footrest carrierFit new unitConnect the shift rod to the shift lever and shift unitErgonomic advantages of forward-mounted footrest systemsForward-mounted footrests allow a more relaxed leg and sitting position, especially on longer rides. The more stretched seating position relieves pressure on the knee joints and hips and contributes to a more upright posture. This reduces muscle tension and ensures greater comfort and riding enjoyment - even on longer journeys.Spare parts serviceAll individual components of the footrest system are also available as spare parts. This ensures the long-term usability of your product. Our customer service team will be happy to help you choose the right spare parts.

"Made in Germany"Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 47 cm forward-mounted footrest systemforTriumph Bonneville T120 / DU01Triumph Bonneville T120 / DU01ATriumph Bonneville T120 Black / DU04The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list.All unscrewable parts are available as spare parts.The footrest system is available in 4 different designs.

"Made in Germany"Forward Controls Kit with German ABE40 cm forwardforRoyal Enfield Bullet 350 and 500 / BSThe Forward Controls Kit is delivered pre-mounted with all parts required for assembly, for example with an extended brake line (if necessary).The Forward Controls Kit fixed on the original frame points.Our Forward Controls Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Forward Controls Kit are galvanically nickel-plated before powder coating.All Motorrad Burchard Forward Control Kits are supplied with a 2-year warranty on processing and chromium plating. Shift- and Brakeleversare fitted by hand and provided with grease nipples. The connecting parts (ball joints) on the shift and brakerods are free of charge and also equipped with grease nipples. This quality standard provides a minimum of play on/off the waves and a maximum oflifetime.The Forward Control Kit deliverd with a ABE from Kraftfahrt-Bundesamt, a mounting instruction and a parts list. All removable parts are available as spare parts.The Forward Controls Kit is available in 2 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 15 cm forward-mounted footrest system for Yamaha XVZ 1300 A Royal Star / 4YP The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.

"Made in Germany Forward-mounted footrest system with TÜV parts certificate according to §19/3 12 cm forward-mounted footrest system for Harley Davidson Softail / FX - FXE Super Glide FXS Low Rider Harley Davidson Softail / FXB - Sturgis Harley Davidson Softail / FXWG - Wide Glide Harley Davidson Softail / FXR - Sport Glide FXRT Harley Davidson Softail / FXST - Softtail It is important that you inform us after ordering whether you have fitted the original brake cylinder to your footrest system or whether you have fitted the original brake cylinder to the rear of the frame. The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, a drawing, assembly instructions and a parts list. All removable parts are available as spare parts. The footrest system is available in 4 different designs.

Pre-mounted footrest system "Tech Glide" for Honda VTX 1300 without TÜV without footrests for 491-608/808

"Made in Germany"Footpegs passenger (1 Set) forAll Models except VN 750 VulcanAll accessories required for assembly are included in the scope of delivery.Our Footpegs are made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the footpegs are galvanically nickel-plated before powder coating.If you have any questions about the product, please contact us by phone.

"Made in Germany Pre-mounted footrest system with ABE from the Federal Motor Transport Authority -2 cm, 5 cm, 13 cm forward-mounted footrest system for Triumph Rocket III without ABS / C23XB The footrest system is 3-way adjustable. Installation is possible with -2 cm, 5 cm or 13 cm pre-positioning. The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.

"Made in Germany" Pre-mounted footrest system with ABE from the Federal Motor Transport Authority 11 cm - 19 cm - 27 cm forward-mounted footrest system for Triumph Rocket III with ABS / C20 - C23XB The footrest system is 3-way adjustable. Installation is possible with 11 cm, 19 cm or 27 cm pre-positioning. The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 2 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 13 cm forward-mounted footrest system for Triumph America / 986MK2 Triumph Speedmaster / 986ML2 The footrest system only fits models from VIN 468390 The footrest system is supplied pre-assembled with all parts required for installation, such as an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 10 cm forward-mounted footrest system for Triumph America / 986MK2 Triumph Speedmaster / 986ML2 The footrest system only fits models up to VIN 468389 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 13 cm forward-mounted footrest system for Triumph Thunderbird Commander / B17 - BF01 Triumph Thunderbird LT / B17 - BF01 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 21 cm forward-mounted footrest system for Triumph Thunderbird Commander / B17 - BF01 Triumph Thunderbird LT / B17 - BF01 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.