Fender "Bobber Round" for rear wheels Material: Steel Raw Used universally for wheel sizes between 15 "-17" The complete lenght is 915 mm Sheet thickness: 2mmThe following widths are available: 145mm with Radium 336mm - for approx. 145mm wide rear wheels 150mm with Radium 345mm - for approx. 150mm wide rear wheels 160mm with Radium 330mm - for approx. 160mm wide rear wheels 180mm with Radium 355mm - for approx. 180mm wide rear wheels 205mm with Radium 335mm - for approx. 205mm wide rear wheels The fenders are supplied as universal fenders and are available in various widths. The width is measured from the inside. We can manufacture your fender according to your specifications. Please give us your desired width, length and radius at the request.
"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforSuzuki M 800 Intruder / WVB4For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforSuzuki VL 800 Volusia / WVBMFor our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
Das Soziuspad ist passend für das Heckteil von Motorrad BurchardFür unsere Sitzbänke stehen insgesamt 18 Muster zur Verfügung (siehe Mustertabelle). Die Sitzbänke werden mit allen zur Montage erforderlichen Zubehörteilen und, wenn nötig, mit einer Montageanleitung ausgeliefert. Die Sitzbänke werden von Hand gefertig "Made in Germany". Das Grundblech ist aus Stahl und Aufgepolstet werden die Sitzbänke mit ca. 3 cm Verbundschaum.Sollten Sie einen Sonderwunsch haben, z.B. abweichende Kederfarbe oder Echtleder, fragen Sie die Preise dazu bitte bei uns an. Alle Muster werden auf Bestellung gefertigt. Die Lieferzeit hierfuer beträgt ca. 8-10 Tage.
"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforYamaha XVS 1100 Drag Star / VP05 For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforYamaha XVS 650 Drag Star / 4VR - 4XRYamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforKawasaki VN 900 Custom - Classic / VN900C - VN900BFor our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforKawasaki VN 800 Vulcan - Classic / VN800A - VN800BFor our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
"Made in Germany" motorcycle bench solo seatfor Honda VT 1100 Shadow / SC23 Honda VT 1100 ACE C2 / SC32The base plate is made of steel. The seats are upholstered with approx. 3 - 4 cm (hard rider seat, solo seat) or 4 - 6 cm (seat with step) composite foam.A total of 18 patterns are available for our benches (see pattern table). Benches are delivered with all accessories necessary for assembly and, if necessary, with assembly instructions.The seat bench slides with the front bracket under the tank, at the rear the seat bench must be screwed to the mudguard (drill hole accordingly).The seat fits additionally for the motorcycle Burchard tail section conversion. The picture shows pattern 10 "Westernstyle
"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforHonda VT 750 Black Widow / RC48For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
"Made in Germany"Motorbike Seat SoloseatforHonda VT 750 ACE C2 / RC44The base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The seat are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The seat fits also on the Motorrad Burchard tail conversion.The picture shows pattern 10 "Westernstyle"
"Made in Germany"Triple Tree Kit 5° degree rake 290mm wide with TÜV Test Report §19/3forSuzuki VS 1400 Intruder / VX51LAll original parts such as fenders, headlights, speedometer units, control units, stand tube panels etc. can be still used.The Triple Tree Kit is supplied with the necessary accessories such as a new axle, distance material for front wheel, brake system, fender, etc.The steering head bearing can be taken from the original Triple Tree Kit.In most cases, the original risers cannot be taken over.All removable parts are available as spare parts.Picture 1/2 is an example illustration and shows the Triple Tree Kit in mounted in a Suzuki VS 1400 Intruder.In the Triple Tree Kit, 3.50 x16" rims with a maximum tyre width of 130 or 150 mm can be installed.Our Triple Tree Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Triple Tree Kit are galvanically nickel-plated before powder coating.The Triple Tree Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. If you have any questions about the product, please contact us by phone at 05261 / 97710 or mail.
"Made in Germany"Triple Tree Kit 5° degree rake 250mm wide with TÜV Test Report §19/3forYamaha XV 750 Virago / 4FY / 4PWYamaha XV 1000 Virago / 2AEYamaha XV 1100 Virago / 3LPAll original parts such as fenders, headlights, speedometer units, control units, stand tube panels etc. can be still used.The Triple Tree Kit is supplied with the necessary accessories such as a new axle, distance material for front wheel, brake system, fender, etc.The steering head bearing can be taken from the original Triple Tree Kit.In most cases, the original risers cannot be taken over.All removable parts are available as spare parts.In the Triple Tree Kit, 3.50 x16" rims with a maximum tyre width of 130 mm can be installed.Our Triple Tree Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Triple Tree Kit are galvanically nickel-plated before powder coating.The Triple Tree Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. If you have any questions about the product, please contact us by phone at 05261 / 97710 or mail.
"Made in Germany"Triple Tree Kit 5° degree rake 250mm wide with TÜV Test Report §19/3forYamaha XV 535 Virago / 3BR - 2YL - 2JVAll original parts such as fenders, headlights, speedometer units, control units, stand tube panels etc. can be still used.The Triple Tree Kit is supplied with the necessary accessories such as a new axle, distance material for front wheel, brake system, fender, etc.The steering head bearing can be taken from the original Triple Tree Kit.In most cases, the original risers cannot be taken over.All removable parts are available as spare parts.Picture 2/3 is an example illustration and shows the Triple Tree Kit in mounted in a Yamaha XV 535 Virago.In the Triple Tree Kit, 3.50 x16" rims with a maximum tyre width of 130 mm can be installed.Our Triple Tree Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Triple Tree Kit are galvanically nickel-plated before powder coating.The Triple Tree Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. If you have any questions about the product, please contact us by phone at 05261 / 97710 or mail.
"Made in Germany"Triple Tree Kit 5° degree rake 290mm wide with TÜV Test Report §19/3forKawasaki VN 800 Classic / VN800BKawasaki VN 1500 Classic / VNT50D - VNT50NAll original parts such as fenders, headlights, speedometer units, control units, stand tube panels etc. can be still used.The Triple Tree Kit is supplied with the necessary accessories such as a new axle, distance material for front wheel, brake system, fender, etc.The steering head bearing can be taken from the original Triple Tree Kit.In most cases, the original risers cannot be taken over.All removable parts are available as spare parts.In the Triple Tree Kit, 3.50 x16" rims with a maximum tyre width of 130 or 150 mm can be installed.Our Triple Tree Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Triple Tree Kit are galvanically nickel-plated before powder coating.The Triple Tree Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. If you have any questions about the product, please contact us by phone at 05261 / 97710 or mail.
"Made in Germany"Triple Tree Kit 5° degree rake 290mm wide with TÜV Test Report §19/3forKawasaki VN 800 Vulcan / VN800AAll original parts such as fenders, headlights, speedometer units, control units, stand tube panels etc. can be still used.The Triple Tree Kit is supplied with the necessary accessories such as a new axle, distance material for front wheel, brake system, fender, etc.The steering head bearing can be taken from the original Triple Tree Kit.In most cases, the original risers cannot be taken over.All removable parts are available as spare parts.In the Triple Tree Kit, 3.50 x16" rims with a maximum tyre width of 130 or 150 mm can be installed.Our Triple Tree Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Triple Tree Kit are galvanically nickel-plated before powder coating.The Triple Tree Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. If you have any questions about the product, please contact us by phone at 05261 / 97710 or mail.
"Made in Germany"Triple Tree Kit 5° degree rake 290mm wide with TÜV Test Report §19/3forHonda VT 600 Shadow / PC21All original parts such as fenders, headlights, speedometer units, control units, stand tube panels etc. can be still used.The Triple Tree Kit is supplied with the necessary accessories such as a new axle, distance material for front wheel, brake system, fender, etc.The steering head bearing can be taken from the original Triple Tree Kit.In most cases, the original risers cannot be taken over.All removable parts are available as spare parts.Picture 2 is an example illustration and shows the Triple Tree Kit in mounted in a Honda VT 600 Shadow.In the Triple Tree Kit, 3.50 x16" rims with a maximum tyre width of 130 or 150 mm can be installed.Our Triple Tree Kit is made of steel and are available in chrome, black glossy powder coated or black matt powder coated.In order to achieve corrosion resistance in powder coating, such as chrome, the Triple Tree Kit are galvanically nickel-plated before powder coating.The Triple Tree Kit deliverd with a TÜV Test Report §19/3, a mounting instruction and a parts list. If you have any questions about the product, please contact us by phone at 05261 / 97710 or mail.
Fender Struts (1 Set) with TÜV Test Reports §19/3forYamaha XVS 650 Drag Star and Drag Star Classic / 4VR - 4XR - VM02 - VM03 - VM04The rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ringTurnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3
Stainless steel Spoke Set for 6.00x15" rear wheelforYamaha XVS 650 Drag Star / 4VR - 4 XR - VM02The Spoke Set is used for the conversion to a 6.00 x15" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.
Rim Ring 6.00x15 " for rear with TÜV Test Report §19/3forYamaha XVS 650 Drag Star / 4VR - 4XR - VM02For the conversion to a wide rear wheel we offer a 6.00x15" Rim Ring.With the rim ring you can drive a 200mm rear tyre.The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard.The original Spoke Set no longer fits.Additional Information:When using the Tire Wide Metzeler 200/70 B 15 M/C ME 880 Marathon some changes (rear or swingarm) are required. You can read the required changes in the categories.Included in the delivery:1 x Rim ring 6.00x15 " with TÜV Test Report §19/3
Rim Ring 6.00x15 " for rear with TÜV Test Report §19/3forYamaha XVS 1100 Drag Star / VP05For the conversion to a wide rear wheel we offer a 6.00x15" Rim Ring.With the rim ring you can drive a 200mm rear tyre.The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard.The original Spoke Set no longer fits.Additional Information:When using the Tire Wide Metzeler 200/70 B 15 M/C ME 880 Marathon some changes (rear or swingarm) are required. You can read the required changes in the categories.Included in the delivery:1 x Rim ring 6.00x15 " with TÜV Test Report §19/3
Fender Struts (1 Set) with TÜV Test Reports §19/3forYamaha XVS 1100 Drag Star / 4VR - 4XR - VM02The rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ringTurnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3