"Made in Germany" Forward-mounted footrest system with ABE from the Federal Motor Transport Authority 12 cm forward-mounted footrest system for Yamaha XVS 650 Drag Star / 4VR - 4XR - VM04 Yamaha XVS 650 Drag Star Classic / VM02 - VM03 The footrest system is supplied pre-assembled with all parts required for installation, e.g. an extended brake line (if necessary). Installation is carried out on the original frame mounting points. Our footrests are made of steel and are available in a choice of high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All Motorrad Burchard footrest systems are supplied with a 2-year guarantee on workmanship and chrome plating. Shift and brake levers are fitted by hand and fitted with grease nipples. Power-transmitting connecting parts (ball joints) on the shift and brake rods are free of play and also fitted with grease nipples. This quality standard ensures minimum play on the shafts and maximum service life. The footrest system is supplied with an ABE from the German Federal Motor Transport Authority, a drawing, assembly instructions and a parts list. All unscrewable parts are available as spare parts. The footrest system is available in 4 different designs.

Fender Struts (1 Set) with TÜV Test Reports §19/3forYamaha XVS 650 Drag Star and Drag Star Classic / 4VR - 4XR - VM02 - VM03 - VM04The rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ringTurnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3

Solo Rack "Billet" chromefor Yamaha XVS1100 Dragstar/ V-star Custom < '99XVS1100 Dragstar/ V-star Custom '00 > up / VP05XVS650 Dragstar / V-star < '03XVS650 Dragstar / V-star '04-up / 4VR-4XRAll parts required for assembly are included. With brackets Maximum for 5kg of luggage. The Socius seat is omitted when the luggage rack is assembled. Material: AluminumDimensionsLength: approx. 32cmWidth: approx. 14cmMaterial thickness: approx. 8mmIncluded in delivery:Solo RackBrackets

Highway Hawk ABE (general operating permit) including markingfor passenger floorboards:Yamaha XVS 650 Drag Star / 4VR, 4XR Yamaha XVS 650 Drag Star Classic / VM02, VM03, VM04 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16The ABE (general operating permit) is valid for all Highway Hawk passenger floorboards of the types: "Standard", "New Tech Glide" and "Smooth" of the listed models.This offer refers to Highway Hawk floorboards that are already installed and in the market.You can order the ABE (general operating permit) and send us your Highway Hawk passenger floorboards including the brackets. Upon receipt of your floorboards, we will re-mark them (by laser inscription) and include the associated ABE.For all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.

Highway Hawk ABE (general operating permit) including markingfor driver floorboards:Yamaha XVS 650 Drag Star / 4VR, 4XRYamaha XV 750 Virago / 4PW, 4FY Yamaha XV 1000 Virago / 2AE Yamaha XV 1100 Virago / 3LP Yamaha XVS 1100 Drag Star / VP05The ABE (general operating permit) is valid for all Highway Hawk rider floorboards of the types: "Standard", "New Tech Glide" and "Smooth" of the listed models.This offer refers to Highway Hawk floorboards that are already installed and in the market.You can order the ABE (general operating permit) and send us your Highway Hawk rider floorboards including the brackets. Upon receipt of your floorboards, we will re-mark them (by laser inscription) and include the associated ABE.For all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.

Swing arm modification forYamaha XVS 650 Drag Star / 4VR - 4XR - VM02Through the change the installation of a 6.00 x15 " Rim Ring with a 200mm rear wheel is possible.To change, the original swingarm must be sent to us. In addition to the postage costs, no additional costs are incurred.The swingarm is widened by us and provided with a new serial number. The price does not include a paint job.Please note that the change is integrated in the TÜV Test Report of our 6.00 x15 " Rim Ring and therefore also only in connection with aMotorrad Burchard 6.00 x15 " Rim Ring is valid. A separate TÜV Test Report only on the swing arm change does not exist.The picture is an example image of a modified swingarm from a Kawasaki VN 800 Classic.

Falcon Double Groove exhaust system without cat and E-mark (EG-BE)ForYamaha XVS 650 Drag Star / 4VR - 4XR 1996 - 2003 Yamaha XVS 650 Drag Star Classic / VM02 - VM03 1998 - 2002The exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of stainless steel and high-gloss polished. The outer diameter is approx. 60 mm. The conversion to the Falcon Double Groove exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (EG-BE), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 and 3 are sample images of a mounted double groove exhaust system on a Yamaha. Supplied with:- Falcon Double Groove exhaust system- Mounting instructions- EG-BE documents

"Made in Germany"Motorbike Seat Hard RiderforYamaha XVS 650 Drag Star / 4VR - 4XRThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 10 "Westernstyle"

Working package lowering kit installationfor MB00-1080MB00-1081 MB00-3050MB00-3051

Sissy bar "Low" in chromefor Yamaha XVS 650 Drag Star / 4VR, 4XRAverage height from fender approx. 250 mm highComplete with brackets and comfortable backrest.The sissy bar is attached to the original frame fix points.Suitable Solo Rack: H525-002All accessories required for assembly are included.Included: 1x backrest Low 1x set of brackets for sissy bar

Floorboard Set for passenger black with ABE (general operating permit)Design "New Tech Glide Metal" for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 27.5 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Rim Ring 6.00x15 " for rear with TÜV Test Report §19/3forYamaha XVS 650 Drag Star / 4VR - 4XR - VM02For the conversion to a wide rear wheel we offer a 6.00x15" Rim Ring.With the rim ring you can drive a 200mm rear tyre.The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard.The original Spoke Set no longer fits.Additional Information:When using the Tire Wide Metzeler 200/70 B 15 M/C ME 880 Marathon some changes (rear or swingarm) are required. You can read the required changes in the categories.Included in the delivery:1 x Rim ring 6.00x15 " with TÜV Test Report §19/3

Falcon Cromo Line - Slash Cut exhaust system with cat and E-mark (EG-BG)ForYamaha XVS 650 Drag Star and Classic / 4VR - 4XR - VM02 - VM03The exhaust system is supplied as a complete installation with all accessories required for assembly. The DB-Killers are removable. The exhaust system is made of steel and high-gloss chrome. You get the typical Slash Cut design. The conversion to the Falcon Cromo Line exhaust system significantly highlights the typical chopper sound. The exhaust system is supplied with all accessories and assembly instructions required for installation. Definition of EG-BEIn the case of technical components with an e-mark (eg-be), it is not necessary to perform a test at a testing centre. The operating licence of the vehicle remains unchanged after the attachment of the accessory. This approval is valid throughout the EU. Picture 2 are a sample image of a mounted Cromo Line exhaust system on a Honda VT 600 Shadow. Supplied with:- Falcon Cromo Line with 1 x manifold for the rear cylinder- Mounting instructions- EG-BG documents

Footpegs rider "Smooth"for Yamaha XVS 125 Drag Star Yamaha XV 535 Virago ab 1990 Yamaha XVS 650 Drag Star / alle Modelle (nicht für Classic Modelle) Yamaha XV 750 Virago Yamaha XV 1000 ViragoYamaha XV 1100 Virago Yamaha XVS 1100 Drag Star / alle Modelle (nicht für Classic Modelle) All accessories required for assembly are included in the scope of delivery. Included in delivery:1 Set

"Made in Germany"Motorbike Seat SoloseatforYamaha XVS 650 Drag Star / 4VR - 4XRThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The seat are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 10 "Westernstyle"

"Made in Germany"Pillion Pad forYamaha XVS 650 Drag Star / 4VR - 4XRThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 10 "Westernstyle"

Frame Cover Plates 1 Set (4 pieces)forYamaha XVS 650 Drag Star - Classic / 4VR - 4XR - VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star - Classic / VP05 - VP16 Yamaha XV 950A Midnight Star / VN02 Included in delivery: 4 pieces

"Made in Germany"Motorbike Seat with stepforYamaha XVS 650 Drag Star / 4VR - 4XRThe base plate is made of steel. The seats are padded with approx. 3-4 cm (Hard Rider Seat, Solo Seat) or 4-6 cm (Seat with step) composite foam.A total of 18 patterns are available for our seats (see picture).The benches are supplied with all accessories required for assembly and, if necessary, with a mounting instructions. Installation is carried at theoriginal frame points.The picture shows pattern 10 "Westernstyle"

Bracket in blackfor Yamaha XVS1100 Dragstar/ V-star Custom < '99 / VP05 XVS650 Dragstar / V-star < '03 XVS650 Dragstar / V-star '04-up / 4VR-4XR Suitable for luggage carrier Billet 66-100 The illustration is exemplary. The bracket is supplied vehicle-specific and may differ from the illustration. Picture shows the chrome version.

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforYamaha XVS 650 Drag Star / 4VR - 4XRYamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Yamaha XVS 650 Drag Star - Classic / 4VR - 4XR - VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star - Classic / VP05 - VP16 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are available in either high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the expert opinion. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

Rim Ring 3.50x16" for front with TÜV Test Report §19/3forYamaha XVS 650 Drag Star / 4VR, 4XR, VM02Yamaha XVS 1100 Drag Star / VP05For the conversion to a wide front wheel we offer a 3.50 x 16" Rim Ring.With the Rim Ring you can optionally drive a 130mm or 150mm front tyre.The Rim Ring is for the original wheel hub. Please note that you need a new Spoke Set from Motorrad Burchard.The original Spoke Set no longer fits.In the example picture you see a 150mm front tyre used.Additional Information:The use of the Tire wide 130/90-16 67H TL Marathon front you need a new fender (see Fenders).The use of the Tire Wide 150/80-16 71H TL Marathon front you need a wider Triple Tree Kit (see Triple Tree Kits) and a new Fender (see Fenders).Included the delivery:1 x Rim Ring 3.50x16" with TÜV Test Report §19/3

Stainless steel Spoke Set for 6.00x15" rear wheelforYamaha XVS 650 Drag Star / 4VR - 4 XR - VM02The Spoke Set is used for the conversion to a 6.00 x15" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.

Fat Bar 38 mm chromeforYamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 All assembly materials required for assembly are included. The pictures for the fat bar are vehicle-related and can deviate from the picture (example image for the design). Please note that the fat bar is only combinable with the original equipment.

Stainless steel Spoke Set for 3.50x16" front wheelforYamaha XVS 650 Drag Star / 4VR, 4XR, VM02Yamaha XVS 1100 Drag Star / VP05The Spoke Set is used for the conversion to a 3.50 x16" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.

Steelbreaded Idle Cable + 15 cm longer to the original length (1 Piece) for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 The steelbreaded idle cable is exchanged for the original idle cable. The lenght (only covering without core) is about 93 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Floorboard Set for rider chrome with ABE (general operating permit)Design "Standard" for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 1100 Drag Star / VP05 The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 31,0 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Steelbreaded Clutch Cable In original length (1 Piece) for Yamaha XVS 650 Drag Star / 4VR - 4XR The steelbreaded clutch cable is exchanged for the original clutch cable. The lenght (only covering without core) is about 107 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded clutch cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Steelbreaded Clutch Cable + 15 cm longer to the original length (1 Piece) for Yamaha XVS 650 Drag Star / 4VR - 4XR The steelbreaded clutch cable is exchanged for the original clutch cable. The lenght (only covering without core) is about 119 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded clutch cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Die All-Balls Radlager für hinten und vorne stehen für höchste Präzision und Langlebigkeit, entwickelt für anspruchsvolle Motorradfahrer. Hergestellt nach ABEC-3-Standards, bieten diese High-Speed-Lager überlegene Genauigkeit und Leistung. Dank der Dreifachlippen-Gummidichtungen bleibt das Fett zuverlässig dort, wo es hingehört, während Wasser und Schmutz effektiv ferngehalten werden.Das verwendete Chevron SRI 2 Fett überzeugt durch seine exzellenten Eigenschaften: Es schützt vor Rost und Oxidation und bleibt in einem Temperaturbereich von -29°C bis +177°C zuverlässig. Ergänzt wird dies durch die robusten Doppellippendichtungen (Type TC) mit Edelstahlschraubenzugfedern, die eine optimale Abdichtung gewährleisten.Setzen Sie auf die Qualität und Zuverlässigkeit von All-Balls und geben Sie Ihrem Motorrad die perfekte Balance aus Leistung und Haltbarkeit – auch unter anspruchsvollsten Bedingungen. Ideal für Chopper, Cruiser und weitere Modelle. Passend für: Yamaha XV 535 Virago,XVS 650 Drag Star,XVS 650 Drag Star Classic,XVZ 1300 Venture Royal 2YL,3BR,4VR,4XR,VM02,VM03,VM04,3JS

Das All Balls Gabelsimmerringe & Staubkappen Set bietet maximale Performance und Schutz für Ihre Motorradgabel. Speziell entwickelt für anspruchsvolle Fahrer, sorgen diese Dichtungen und Kappen für eine lange Lebensdauer und ein reibungsloses Fahrerlebnis.Das innovative Dichtungsprofil gewährleistet einen gleichmäßigen Druck auf das Gabelrohr und reduziert somit Reibung und Verschleiß. Eine zusätzliche dritte Dichtlippe fungiert als Staubwischer und hält die Gabelrohre effektiv frei von Schmutz und Sand. Die Staubkappen sind mit externen Federn ausgestattet, um eine optimale Abdichtung und Sauberkeit zu garantieren.Lieferumfang (je nach Auswahl):Simmerringe: 2 StückStaubkappen: 2 StückSet: 2 Simmerringe & 2 StaubkappenDas All Balls Set ist die perfekte Wahl für Motorräder, die höchste Leistung und Zuverlässigkeit erfordern. Ideal für Cruiser, Chopper und viele andere Modelle. Passend für Honda,Kawasaki,Suzuki,Yamaha VT 750 ACE C2,VT 750 Spirit,VT 750 Shadow,EN 500,Vulcan S ,VZ 800 Marauder,XV 1700 Road Warrior,XVS 1100 Drag Star,XVS 1100 Drag Star Classic,XVS 1300 Custom,XVS 650 Drag Star,XVS 650 Drag Star Classic,XVS 950 A Midnight Star RC44,RC53,RC50,RC50 ,EN500B,EN500C,EN500A ,EN650A,EN650D,AF,VP14,VP05,VP16,VP36,4VR,4XR,VM02,VM03,VM04,VN02

Steelbreaded Throttle Cable In original length (1 Piece) for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 The steelbreaded throttle is exchanged for the original throttle. The lenght (only covering without core) is about 80 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Steelbreaded Throttle Cable + 15 cm longer to the original length (1 Piece) for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 The steelbreaded throttle is exchanged for the original throttle. The lenght (only covering without core) is about 92 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded throttle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Steelbreaded Speedo Cable In original length (1 Piece) for Yamaha XVS 650/ XVS 1100 Drag Star Custom / 4VR - 4XR /  VP05 The steelbreaded speedo cable is exchanged for the original speedo cable. The lenght (only covering without core) is about 94 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded speedo cable is included in the delivery.

Steelbreaded Speedo cable + 15 cm longer to the original length (1 Piece) for Yamaha XVS 650/ XVS 1100 Drag Star Custom / 4VR - 4XR /  VP05 The steelbreaded speedo cable is exchanged for the original speedo cable. The lenght (only covering without core) is about 108 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded speedo cable is included in the delivery.

Footpegs passenger (1 Set) "Smooth"for Yamaha XVS 125 Drag Star / alle Modelle Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 Yamaha XVS 950 A Midnight Star / VN02 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16 Yamaha XV 1600 Wild Star / VP08 Yamaha XV 1700 Road Warrior Suzuki C 800 Intruder / WVBM - WVB4 Suzuki VL 800 Volusia / WVBM - WVB4 Suzuki M 800 Intruder / WVBM - WVB4 Suzuki C 1800 R Intruder / WVCTAll accessories required for assembly are included in the scope of delivery. If you have any questions about the product, please contact us by phone.

Steelbreaded Idle Cable In original length (1 Piece) for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star / VM02 - VM03 - VM04 The steelbreaded idle cable is exchanged for the original idle cable. The lenght (only covering without core) is about 81 cm. The picture is exemplary for the design. The connections are delivered in a vehicle-related and may deviate from the picture. 1 steelbreaded idle cable is included in the delivery. We also offer special lengths in our shop and can also produce cables by your pattern. Please contact us.

Footpegs rider (1 Set) "Tech Glide"for Yamaha XVS 125 Drag Star Yamaha XV 535 Virago ab 1990 Yamaha XVS 650 Drag Star / alle Modelle (nicht für Classic Modelle) Yamaha XV 700 Virago Yamaha XV 750 Virago Yamaha XV 1000 Virago Yamaha XV 1100 Virago Yamaha XVS 1100 Drag Star / alle Modelle (nicht für Classic Modelle) All accessories required for assembly are included in the scope of delivery. If you have any questions about the product, please contact us by phone

Mounting bracket in chromefor Yamaha XVS1100 Dragstar/ V-star Custom < '99 / VP05 XVS650 Dragstar / V-star < '03 XVS650 Dragstar / V-star '04-up / 4VR-4XR Suitable for Solo Rack Billet 66-100 Example image. The bracket are delivered in a vehicle-related and may deviate from the picture.

Turn Signals Visors "Plain" A packing unit contains two pieces each. The mounting is done by screws. All accessories required for assembly are included in the scope of delivery. Suitable for: Yamaha XV 125 Virago Yamaha XVS 125 Drag Star Yamaha XV 250 Virago Yamaha XV 535 Virago Yamaha XVS 650 Drag Star Yamaha XVS 650 Drag Star Classic Yamaha XV 750 Virago Yamaha XV 1000 Virago Yamaha XV 1100 Virago Yamaha XVS 1100 Drag Star Yamaha XVS 1100 Drag Star Classic Yamaha XVZ 1300 Royal Star Yamaha XV 1600 Wild Star

Shock absorber lowering with TÜV Test Report §19/3 for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 By the conversion the motorcycle is lowered by approx. 4,0 cm (measured above the rear wheel centre) Material Steel chrome With TÜV Test Report 19/3 (TÜV Nord) for the Honda VT 600 Shadow The lowering kit is delivered with all parts required for assembly. Attention to the conversion you need a spring tensioner Mounting NOTE: 1. Squeeze Spring with spring tensioner 2. Unscrew the shock absorber head 3. Relieve the spring tension and remove the spring 4. Push the large ring over shock absorber housing 5. Remove the old stop Bush from the piston rod, slide the supplied plastic bushing over the piston rod 6. Push the spring and press it together with the spring tensioner 7. Screw new Shock absorber head, relieve spring 8. Take the Bush from the old shock absorber head and re-press into the new one You can also let us done the shock absorber conversion. The original shock absorber must be sent to us for conversion. In addition, please order the service "shock absorber lowering for MB00-1080-MB00-1081-MB00-3050-H472-0065". The shock absorbers are lowered by us.

Shock absorber lowering WITHOUT TÜVfor Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 By the conversion the motorcycle is lowered by approx. 4,0 cm (measured above the rear wheel centre) Material Steel galvanized The lowering kit is delivered with all parts required for assembly. Attention to the conversion you need a spring tensioner Mounting NOTE: 1. Squeeze Spring with spring tensioner 2. Unscrew the shock absorber head 3. Relieve the spring tension and remove the spring 4. Push the large ring over shock absorber housing 5. Remove the old stop Bush from the piston rod, slide the supplied plastic bushing over the piston rod 6. Push the spring and press it together with the spring tensioner 7. Screw new Shock absorber head, relieve spring 8. Take the Bush from the old shock absorber head and re-press into the new one You can also let us done the shock absorber conversion. The original shock absorber must be sent to us for conversion. In addition, please order the service "shock absorber lowering for MB00-1080-MB00-1081-MB00-3050-H472-0065". The shock absorbers are lowered by us. All submitted shock absorber changes are guaranteed to be completed within 24 hours. All removable parts are available as spare parts.

Floorboard Set for passenger black with ABE (General Operating Permit)Design "Smooth" for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16 The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 27.5 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Floorboard Bracket Set for passenger fits floorboards 73-700 and 73-750for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16 The illustration is exemplary, the brackets are delivered vehicle-specific.All mounting materials required for installation are supplied.

Floorboard Set for passenger chrome with ABE (general operating permit)Design "New Tech Glide"forYamaha XVS 650 Drag Star / 4VR - 4XRYamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04Yamaha XVS 1100 Drag Star / VP05Yamaha XVS 1100 Drag Star Classic / VP16The floorboards are exchanged for the original footpegs.All materials required for assembly are included.The floorboard holder is vehicle-related and can deviate from the image (sample image for the design).The dimensions of the floorboards:Length: approx. 27.5 cmWidth: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Floorboard Set for passenger black with ABE (general operating permit)Design "New Tech Glide"forYamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16 The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 27.5 cm Width: approx. 12.5 cmFor all products with an ABE (General Operating Permit) in which the vehicle type is listed, the product is considered tested and requires no further registration or acceptance. Thus, products with an ABE can be installed properly according to the requirements and instructions and the installation instructions. A registration or acceptance of the product is then no longer necessary.Included in delivery:FloorboardsBrackets

Floorboard Set for passenger chrome with ABE (Allgemeine Betriebserlaubnis)Design "Smooth" for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16 The floorboards are exchanged for the original footpegs. All materials required for assembly are included. The floorboard holder is vehicle-related and can deviate from the image (sample image for the design). The dimensions of the floorboards: Length: approx. 27.5 cm Width: approx. 12.5 cmFür alle Produkte mit einer ABE (Allgemeine Betriebserlaubnis) in denen der Fahrzeugtyp mit aufgeführt ist gilt das Produkt als geprüft und bedarf keiner weiteren Eintragung oder Abnahme. Somit können Produkte mit einer ABE nach den Auflagen und Hinweisen und der Montageanleitung fachgerecht montiert werden. Eine Eintragung oder Abnahme des Produktes ist dann nicht mehr nötig.Included in delivery:FloorboardsBrackets

Passenger Peg Extensions (1 Pair) chrome for Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 Honda VTX 1300 / SC552 Honda VT 1300 CX Fury / SC61 Yamaha XVS 125 Drag Star Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16 Yamaha XV 1600 Wild Star / VP08 The lowering is about 10 cm. All assembly materials required for assembly are included.

Footpegs passenger (1 Set) "Tech Glide"for Yamaha XVS 125 Drag Star / alle ModelleYamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 Yamaha XVS 950 A Midnight Star / VN02 Yamaha XVS 1100 Drag Star / VP05 Yamaha XVS 1100 Drag Star Classic / VP16 Yamaha XV 1600 Wild Star / VP08 Yamaha XV 1700 Road Warrior Suzuki C 800 Intruder / WVBM - WVB4 Suzuki VL 800 Volusia / WVBM - WVB4 Suzuki M 800 Intruder / WVBM - WVB4Suzuki C 1800 R Intruder / WVCT All accessories required for assembly are included in the scope of delivery. If you have any questions about the product, please contact us by phone.

Turnsignal Grill Sets chromed A packing unit contains 4 pcs. The mounting is done by screws. All accessories required for assembly are included in the scope of delivery. For: Yamaha XV 125 Virago Yamaha XVS 125 Drag Star Yamaha XV 250 Virago Yamaha XV 535 Virago Yamaha XVS 650 Drag Star Yamaha XVS 650 Drag Star Classic Yamaha XV 750 Virago Yamaha XV 1000 Virago Yamaha XV 1100 Virago Yamaha XVS 1100 Drag Star Yamaha XVS 1100 Drag Star Classic Yamaha XVZ 1300 Royal Star Yamaha XV 1600 Wild Star