"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 Honda VT 1100 Shadow / SC23 Honda VT 1100 ACE C2 / SC32 Honda VT 1100 ACE C3 / SC39 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the expert opinion. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.
Das Soziuspad ist passend für das Heckteil von Motorrad BurchardFür unsere Sitzbänke stehen insgesamt 18 Muster zur Verfügung (siehe Mustertabelle). Die Sitzbänke werden mit allen zur Montage erforderlichen Zubehörteilen und, wenn nötig, mit einer Montageanleitung ausgeliefert. Die Sitzbänke werden von Hand gefertig "Made in Germany". Das Grundblech ist aus Stahl und Aufgepolstet werden die Sitzbänke mit ca. 3 cm Verbundschaum.Sollten Sie einen Sonderwunsch haben, z.B. abweichende Kederfarbe oder Echtleder, fragen Sie die Preise dazu bitte bei uns an. Alle Muster werden auf Bestellung gefertigt. Die Lieferzeit hierfuer beträgt ca. 8-10 Tage.
"Made in Germany" motorcycle bench solo seatfor Honda VT 1100 Shadow / SC23 Honda VT 1100 ACE C2 / SC32The base plate is made of steel. The seats are upholstered with approx. 3 - 4 cm (hard rider seat, solo seat) or 4 - 6 cm (seat with step) composite foam.A total of 18 patterns are available for our benches (see pattern table). Benches are delivered with all accessories necessary for assembly and, if necessary, with assembly instructions.The seat bench slides with the front bracket under the tank, at the rear the seat bench must be screwed to the mudguard (drill hole accordingly).The seat fits additionally for the motorcycle Burchard tail section conversion. The picture shows pattern 10 "Westernstyle
Fender Struts (1 Set) with TÜV Test Reports §19/3for Honda VT 1100 ACE C2 / SC32The rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering around 42mm of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ring.Turnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3
Cat Eye" rear light E-approvedDimensions:Width: approx. 12.5 cm Height: approx. 6.5 cmDistance between mounting points: approx. 5 cmIncluded in delivery: 1 piece
Fender "Flat" Style for rear wheels Material: Steel Raw Used universally for wheel sizes between 15 - 17" Total length is 1210 mm Radius: 385mmSheet thickness: 1,5mmThe following widths are available: 200mm - for approx. 170mm - 180mm wide rear wheels 220mm - for approx. 200mm wide rear wheels The fenders are supplied as universal fenders and are available in various widths. The width is measured from the inside. We can manufacture your fender according to your specifications. Please give us your desired width, length and radius at the request.
License plate holder for Cat Ey universal Wide= 12,5 cm High= 6,5 cm Made of stainless steel